Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

NUT, SPECIAL

Open
SPE7L4-27-T-0915Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L4-27-T-0915 is a federal procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the supply of eight special nuts, identified by NSN 5310-00-301-7970. The contract specifies a delivery timeline of 168 days after order, with a required delivery date of May 15, 2027, and shipping terms set as FOB Origin. Performance will take place at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by strict technical and quality standards, incorporating the DLA Master List of Technical and Quality Requirements and utilizing MIL-STD-2073-1E and ASTM D3951 for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity reporting, the Buy American Act, and prohibitions on covered defense telecommunications equipment. Quotes must be submitted via the DIBBS portal.

General Info

DLA procurement for eight special nuts delivered to New Cumberland by May 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Office AddressUSA
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,SPECIAL
NUT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NORTH AMERICAN ROCKWELL CORP
DETROIT MI
ADEQUATE DATA FOR NSN/Part Number: 5310-00-301-7970 Quantity: 8 EA Purchase Request: 7019025364QTY: 8 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Screw FabricationThis subcontract involves the fabrication of 72 custom machine screws for prime contractors supporting DLA supply contracts. The screws must be manufactured to 1/4-28 UNF-2A x 1-5/8 specifications using steel that conforms to MIL-S-6050/AMS6280, adhering to Hamilton Sundstrand Corporation part number 69608-428-26. Production requires the use of precision CNC turning and threading equipment, with quality control sampling performed according to MIL-STD-1916 or ASQ H1331 standards. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this precision manufacturing requirement categorized under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacture of Shoulder Bolts (NSN 5306-01-053-0198)This subcontract involves the precision manufacture of 245 shoulder bolts for the DLA Weapons Support ASC Commodities Division under NSN 5306-01-053-0198. The contractor is responsible for fabricating the units according to Basic Drawing NR 55820 43390 Revision E and ensuring all items meet quality control standards per MIL-STD-1916 or ASQ H1331. The project requires support for source inspection of critical application items and final delivery of packaged bolts to DLA Distribution Cherry Point in accordance with MIL-STD-2073-1E. To be eligible, the contractor must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. The performance of the contract is centered in Cherry Point, North Carolina.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Retaining Ring ManufacturingThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the precision manufacture of 4,982 retaining rings under NSN 5325002516131. Production must strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 07482 9646M06 Revision D. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place at Robins Air Force Base. The contractor must utilize precision machining equipment and maintain strict compliance with DFARS 252.204-7012. Quality control and sampling are governed by FAR 52.246-2 and either MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of 4,982 conforming retaining rings intended for prime contractors fulfilling DLA supply contracts.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Machine Bolts (NSN 5306-01-118-6417)This subcontract involves the manufacture of 484 machine bolts under NSN 5306-01-118-6417 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the bolts using precision CNC machining or cold-heading equipment in strict accordance with MS35764H Revision H and MIL-DTL-45912C Revision C. All deliverables must adhere to MIL-STD-130N and MIL-STD-129 for marking, as well as DLA RP001 and MIL-STD-2073-1E for packaging. To be eligible, the provider must maintain ISO 9001 or SAE AS9003 certification and ensure full compliance with NIST SP 800-171 standards. The project is categorized under NAICS code 332722, with the place of performance located in Tracy, California. The response deadline for this requirement is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Flat Washer Manufacturing (NSN 5310008517171)This subcontract involves the manufacture and supply of 528 flat washers under NSN 5310008517171 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the units using precision metal stamping or machining, ensuring all items are mercury-free and meet strict quality assurance standards per MIL-STD-1916 or ASQ H1331. The scope of work includes packaging and marking the finished products in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001. Once completed, the washers must be delivered to DLA Distribution San Joaquin in Tracy, California. The project falls under NAICS code 332722 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305-01-60-47693)This subcontract involves the supply of 63 units of hexagon head cap screws, specifically matching NSN 5305-01-60-47693, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to DLA Packaging Requirements RP001 and MIL-STD-2073-1E, while following marking standards RQ017 and MIL-STD-129. Performance for this contract is based in New Cumberland. To be eligible, the provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and meet CMMC Level 2 cybersecurity standards. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Manufacture of Shear Bolts (NAS626-30)This subcontract involves the manufacture of 1,020 high-strength shear bolts, specifically NSN 5306-00-813-8089, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work requires precision machining and forming in strict accordance with TDP Rev C Gen 3 and NAS624 through NAS644 standards, with a specific prohibition against the use of additive manufacturing. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification and maintain full DFARS cybersecurity compliance. The project is categorized under NAICS code 332722, with performance taking place in New Cumberland. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Plain Hexagon Nuts (NSN 5310010470393)This subcontract involves the supply of 977 plain hexagon nuts, identified by NSN 5310010470393, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the nuts in accordance with NAS1423 Revision 5 and FF-N-836F(1) standards. All deliverables must be sent to DLA Distribution centers, with the place of performance located at Hill AFB. Strict quality and regulatory requirements are in place, including quality assurance inspections per MIL-STD-1916 or ASQ H1331 and packaging compliance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor must adhere to the Buy American Act for materials and maintain NIST SP 800-171 cybersecurity compliance. The response deadline for this opportunity is November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 335131
New
DIBBS
Supplier of Groove Pulley (NSN 3020012998531)This subcontract, issued by the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament, requires the procurement or manufacture of one Groove Pulley under NSN 3020012998531. The selected supplier must ensure the item is packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 before delivery to the designated government location at Fort Campbell. Eligible contractors must maintain an active SAM registration and adhere to DFARS 252.247-7023 regulations regarding ocean transportation. The opportunity falls under NAICS code 335131, with a response deadline set for November 16, 2026.
Residential Electric Lighting Fixture Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and PreparationThis subcontract involves providing specialized military-grade packaging and crating services for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work focuses on the preparation of precision engine components, specifically two shafts, for international transit to Karachi, Pakistan. All work must strictly adhere to MIL-STD-2073-1E and DLA RP001 requirements to ensure the integrity of the components during freight forwarding. To prevent damage and degradation during transport, the contractor is required to utilize specific protective measures, including moisture barriers, cushioning, and corrosion inhibitors. The final deliverables must be securely packaged and labeled according to international shipping standards. This project falls under NAICS code 488510 and is intended for prime contractors managing DLA Weapons Support projects.
Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Precision Shaft Manufacturing (NSN 3040011216084)This subcontract involves the precision fabrication of two shafts for Stewart and Stevenson Model 16-114D001 diesel engines, supporting prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament. The work requires precision CNC machining according to NSN 3040011216084 specifications and strict adherence to MIL-STD-973 configuration control and MIL-STD 130/MIL-STD-129 marking standards. Additionally, the manufacturer must ensure that no mercury is added to the materials. The project falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026, to fulfill the requirement for the delivery of finished and inspected components.
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
Supplier of Hydraulic Motors (NSN 2540-01-449-3863)This subcontract involves the supply of seven hydraulic motors identified by NSN 2540-01-449-3863 to support prime contractors delivering on DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with performance taking place in Tracy, California. The supplier is responsible for manufacturing or sourcing the motors while strictly adhering to RP001 DLA Packaging Requirements. A critical technical constraint is that the parts must not be produced using any additive manufacturing processes. Interested parties must respond by November 16, 2026.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
Air Conditioning/Heating Duct Assembly FabricationThis subcontract involves the fabrication and supply of 20 specialized air conditioning and heating rear V duct assemblies for the Defense Logistics Agency under the Department of Defense. The selected manufacturer must produce the components according to specific technical drawings for NSN 2540016114216 and perform the work in New Cumberland. This opportunity is designated as a total small business set-aside under NAICS code 336390. Strict compliance with quality and environmental standards is required, including the maintenance of an ISO 9001:2015 quality system and adherence to MIL-STD-129 marking requirements. The contractor must ensure that no Class I ozone depleting chemicals are utilized and must comply with DFARS 252.223-7008 regulations regarding the use of Hexavalent Chromium. Responses are due by November 16, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333241
New
DIBBS
Triple-Strand Roller Chain Supplier (NSN 3020-00-252-7348)This subcontract involves the manufacture and supply of 39 lengths of triple-strand, riveted fastening, figure-eight type plain plate roller chains for prime contractors supporting DLA Weapons Support projects. Specifically designed for 20-ton truck-mounted crane-shovels, the chains must be produced in accordance with NSN 3020-00-252-7348 and ASME B29.100 standards. The contract requires strict adherence to the Buy American Act, with marking and packaging performed according to MIL-STD-129 and MIL-STD-2073-1E respectively. The project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located at Hill AFB. Delivery of the roller chains is specified as FOB Origin. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 333241.
Food Product Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work involves providing specialized military-grade packaging and marking for 67 units of roller chains. All work must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and DLA requirement RP001, utilizing industrial labeling equipment along with MIL-SPEC cushioning and moisture barriers. The final deliverables must be fully processed and ready for shipment to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This project falls under NAICS code 488410, with a response deadline set for November 16, 2026.
Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333249
New
DIBBS
Steel Roller Chain Supplier (NSN 3020-00-488-5522)This subcontract involves the procurement of 67 units of steel roller chains, identified by NSN 3020-00-488-5522, to support prime contractors working on DLA Weapons Support projects for the Department of Defense. The supplier is responsible for manufacturing or sourcing chains that meet technical requirement RA001, specifically featuring a 0.750 inch nominal pitch and a 2 link row quantity. Strict adherence to the Buy American Act and mercury-free material compliance is required for all delivered units. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 333249. Interested parties must respond by November 16, 2026.
Other Industrial Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488410
New
DIBBS
Military-Grade Packaging and LogisticsThis subcontract for Military-Grade Packaging and Logistics supports prime contractors on DLA Weapons Support projects. The scope of work involves the specialized packaging and palletization of electronic components, requiring strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA RP001 for palletization. Additionally, the contractor must ensure all government identification is managed according to RQ011 standards. The final deliverables are shipping-ready, palletized components destined for DLA Distribution Albany. This effort is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with performance taking place in Albany, Georgia. The response deadline for this opportunity is November 16, 2026.
Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Branched Wiring Harness FabricationThis subcontract involves the fabrication of three branched wiring harnesses for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The manufacturer is required to produce the harnesses according to BAE Systems P/N 4354650 and NSN 2590-01-686-4329 specifications, utilizing precision wiring and termination techniques while strictly avoiding additive manufacturing. The project must adhere to DFARS 252.204-7012 and DLA quality requirements RQ011 and RQ017. Performance will take place in Albany, Georgia, under NAICS code 334418. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331210
New
DIBBS
Supply of Heat-Resistant Alloys/MaterialsThis subcontract involves the supply of raw heat-resistant metals and specialized alloys to prime contractors supporting the Department of Defense, specifically for DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work focuses on sourcing and delivering raw material stock that meets the technical specifications for NSN 2540-01-439-6261 to a fabricator located in New Cumberland. To ensure strict compliance with defense standards, the provider must furnish Mill Test Reports and material certifications. A critical requirement of the contract is adherence to DFARS 252.225-7009 restrictions regarding the use of foreign metals. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-8806
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-27-T-3732
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-27-T-9309
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
ASSEMBLY, LEVER FORK
Solicitation # SPE7L1-27-T-3730
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ROUND
Solicitation # SPE4A6-27-T-9189
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-8684
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-27-T-8859
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A6-27-T-8903
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-27-T-9328
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-8908
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-8733
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-27-T-8799
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS