Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nylon Jacketing for Aircraft Control Cables

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing nylon jacketing for aircraft control cables to support prime contractors delivering on DLA supply contracts. The scope of work requires applying a protective nylon jacket to 1/16 inch wire rope using coating or extrusion equipment to ensure a precise final outside diameter of 1/8 inch. All deliverables must adhere to MIL-DTL-83420 specifications and maintain strict material traceability in accordance with DLA Directive Procurement Note C03. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place in Greensboro, North Carolina. The contract is categorized under NAICS code 325211 and focuses on the delivery of completed jacketed wire rope assemblies.

General Info

Subcontract for nylon jacketing of aircraft control cables per MIL-DTL-83420 specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

325211 - Plastics Material and Resin Manufacturing

Place of Performance

GREENSBORO, NC, 27409, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1343.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROPE, WIRE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs nylon jacketing for prime contractors delivering DLA supply contracts. Applies a protective nylon jacket to the exterior of 1/16" wire rope using extrusion or coating equipment to achieve a final outside diameter of exactly 1/8 inch. Maintains underlying MIL-DTL-83420 specifications and provides material traceability per DLA Directive Procurement Note C03. Delivers jacketed wire rope assemblies.

Similar Contracts

Same NAICS industry code

Industrial Coating SuppliesThis subcontract for Industrial Coating Supplies involves the provision of high-performance primers, coatings, sealers, and fillers for prime contractors working on Greater Dayton RTA facility projects. The required materials must be specifically engineered to resist diesel soot, brake residue, and salt, while maintaining full compatibility with steel and concrete substrates in accordance with MPI and SSPC standards. The supplier is responsible for delivering approved industrial coating systems along with all necessary Product Data Sheets and Safety Data Sheets. Managed by the Capital Management/Executive agency in Ohio, the contract falls under NAICS code 325211. The solicitation was posted on October 16, 2026, with a response deadline set for December 1, 2026.

Capital Management/Executive

POSTED

about 12 hours ago

DEADLINE

in about 2 months

Industrial Coating Material SupplyThis subcontract for Industrial Coating Material Supply involves providing high-performance industrial primers and topcoats for prime contractors working on Port of Houston Authority crane projects. The supplier is responsible for delivering marine-grade coatings and specialized colors directly to the terminal site, ensuring all materials strictly adhere to Section 09 96 00.00 specifications. All deliveries must be accompanied by the necessary technical data sheets and safety data sheets. The opportunity is categorized under NAICS code 325211 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of November 4, 2026, at 5:00 PM. This contract focuses on the procurement of certified coating materials to support critical infrastructure projects within the Port of Houston Authority.

Port of Houston Authority

POSTED

DEADLINE

Polypropylene Label Protector SupplierThis subcontract agreement establishes a partnership for the supply of clear polypropylene protective covers for library labels used on Dufferin-Peel Catholic District School Board projects. The supplier is responsible for manufacturing or sourcing protectors in two specific dimensions, 2 by 2.5 inches and 7/8 by 2 3/8 inches, which must be delivered in 1-meter rolls. To ensure quality and compliance, the supplier is required to provide samples for testing and evaluation within five working days of a request. The contract was posted on October 15, 2026, with a response deadline of November 12, 2026.

Dufferin-Peel Catholic District School Board

POSTED

DEADLINE

Superabsorbent Polymer/Tissue SupplierThis subcontract opportunity is for the supply of specialized absorbent flow-through tissue or superabsorbent polymer to support prime contractors on Department of Defense projects for the DLA Troop Support Medical Supply Chain. The required materials must be medical-grade, capable of expanding upon contact with aqueous solutions, and compatible with heat-sealing processes. Suppliers are responsible for delivering these raw materials in bulk and providing the necessary Material Safety Data Sheets for all chemical components. The procurement is categorized under NAICS code 325211 and will be performed in Silverdale, Washington. Interested parties must submit their responses by October 22, 2026, following the posting date of October 15, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Raw Material Supply for Flexible TubingThis subcontract involves the supply of raw polymer, rubber, or synthetic elastomer for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the delivery of bulk raw material pellets, resins, or sheets that strictly adhere to the chemical resistance and flexibility standards of NSN 4720000712272. To ensure quality and safety, the provider must furnish Material Safety Data Sheets and Certificates of Conformance with all deliveries. Compliance with the Berry Amendment and the Buy American Act is mandatory for all materials provided under this agreement. The performance of the contract is centered at Holloman AFB, with a response deadline set for October 26, 2026. This procurement falls under NAICS code 325211 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

High-Conductivity Material SupplyThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves the supply of raw conductive metal stock required for the manufacture of NSN 6150-01-653-6747. The selected provider will deliver certified raw material stock to prime contractors, ensuring that all deliveries are accompanied by Material Test Reports to verify strict purity and conductivity standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment regarding material sourcing. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 325211. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Nonmetallic Raw Material Supplier

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Supplier of High-Performance Insulation Raw MaterialsThis subcontract involves the supply of raw polymer or extruded insulation materials to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for delivering raw material stock directly to the manufacturer, ensuring all products strictly adhere to the chemical and physical specifications outlined in Drawing NR 01417 SC-X15112. A critical requirement of the agreement is the provision of Material Certifications to verify full compliance with the Berry Amendment and the Buy American Act. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 325211.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace-Grade Nonmetallic Material SupplyThis subcontract, titled Aerospace-Grade Nonmetallic Material Supply, involves the provision of raw nonmetallic polymers or elastomers to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The supplier is responsible for delivering raw material stock in the form of pellets, rods, or sheets that strictly adhere to the chemical and physical properties defined in NASM21266 and NASM22529. Performance will take place at Hill AFB. To ensure quality and regulatory compliance, the contractor must provide Material Test Reports and Certificates of Conformance for all deliveries. Additionally, all materials must comply with the requirements of the Buy American Act and the Berry Amendment. The opportunity was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 325211.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Berry Amendment Compliant Raw MaterialsThis subcontract involves the supply of raw materials, such as reinforced plastics, specialized polymers, or metals, to prime contractors supporting DLA Weapons Support LSO Combat Vehicles and Armament. The materials must strictly adhere to the technical specifications established by the Government Design Control Activity for Oshkosh PN 3829516. The selected provider is responsible for delivering shipments directly to the manufacturer. A critical requirement of this contract is the provision of certifications of origin to ensure full compliance with the Buy American Act and the Berry Amendment. This opportunity falls under NAICS code 325211 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

ETFE and SCETFE Resin/Pellet SupplyThis subcontract, managed through the NASA Shared Services Center, involves the supply of raw Ethylene Tetrafluoroethylene (ETFE) and Semi-Rigid Cross-Linked Ethylene Tetrafluoroethylene (SCETFE) resins. These high-purity materials are intended for use by prime contractors on NASA Glenn Research Center projects, specifically for the production of primary insulation layers. The scope of work requires the manufacture and delivery of polymer resins and pellets to a cable manufacturer. All supplied materials must strictly adhere to technical specifications, ensuring compatibility with wall thickness requirements of 0.045 inches and 0.01 inches. The opportunity is categorized under NAICS code 325211.

NASA Shared Services Center

POSTED

DEADLINE

Water Treatment Polymer SupplierThis subcontract agreement involves the supply and delivery of water treatment polymer, specifically Norfloc 122 or an equivalent product, for prime contractors working on potable water treatment projects for the City of Weyburn. The required polymer must adhere to ANSI/AWWA B703 standards and hold approval for potable water service under NSF/ANSI 60. Deliveries are to be made in 50 lb bags, with a maximum of 12 bags per delivery. Interested parties must submit their responses by the deadline of November 10, 2026, for this opportunity which falls under NAICS code 325211.

City of Weyburn

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of PIN-RIVET (NSN 5320-00-929-6443)This subcontract involves the procurement of 11,000 units of PIN-RIVET hardware, identified by NSN 5320-00-929-6443, to support prime contractors delivering DLA supply contracts for Air Logistics Centers. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to the specified national stock number requirements. All deliverables must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 and RP001 standards. Additionally, the contract requires DLA J34 export control approval. This effort is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services for Defense HardwareThis subcontract involves providing specialized packaging and marking services for defense hardware supporting the DLA Weapons Support ASC. The scope of work requires the packaging of 37,000 pins in accordance with MIL-STD-2073-1E and the marking of items per MIL-STD-129 and MIL-STD-130, which includes the application of Unique Identification. The contractor must utilize UID laser etching equipment and MIL-SPEC materials to ensure all hardware is properly prepared and palletized per RP001 standards for final delivery to DLA Distribution Anniston. Managed under NAICS code 333613 for the Department of Defense, the project demands the delivery of fully packaged and palletized hardware ready for immediate shipment. Interested parties should note the tight response window following the October 16, 2026, posting date. The contract ensures that all prime contractor requirements for the Army and Air Force divisions are met through strict adherence to military specifications.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Quick Release PinsThis subcontract involves the precision machining and fabrication of 37,000 Quick Release Pins for prime contractors supporting the DLA Weapons Support ASC. The manufacturer must produce the units in strict accordance with TDP Rev B Gen 3 and Drawing NR 19207 10931133, utilizing precision CNC machining and calibrated measuring and test equipment as mandated by requirement RT001 for Critical Application Items. To ensure compliance with security and export regulations, the contractor is required to maintain CMMC Level 2 and US/Canada JCP certification for handling export-controlled data. The final deliverable consists of 37,000 finished pins that meet all specified technical data package requirements for the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413)This subcontract involves the procurement of 860 units of Cell Assembly, Optical Instrument (NSN 5855-01-442-6413), specifically Elbit Systems of America part number 268788. These components are intended for prime contractors supporting DLA Weapons Support ASC contracts under the Department of Defense. All deliveries must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards to ensure military compliance. To be eligible, suppliers must provide authorized dealer certification from the approved source of supply and maintain ISO 9001:2015 certification. Additionally, a CMMC Level 2 self-assessment is required. The solicitation was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Supply of High-Strength Blind Rivets (NAS/Huck Standard)This subcontract involves the supply of 1,791 high-strength blind rivets, identified by NSN 5320-00-150-4092, for prime contractors working on DLA Weapons Support ASC projects. The required components must be commercial off-the-shelf items meeting either NAS80205 P/N NAS1919B04-02 or Huck International P/N MLSPB04-02 standards. Due to the critical nature of the application, the provider must maintain rigorous quality control systems to ensure part integrity. The contract specifies strict logistics and handling requirements, including packaging and labeling according to MIL-STD-129 and palletization following RP001 and ASTM D3951 guidelines. All units are to be delivered to Depot Hill, Utah. This procurement is managed by the Department of Defense under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Aerospace-Grade Fastener StockThis subcontract involves the supply of certified raw metal stock or pre-formed blanks used by prime contractors to fulfill DLA supply contracts for the US Air Force. The scope focuses on providing aerospace-grade alloys that strictly adhere to NSN 5320-01-326-9549 specifications, ensuring all materials are delivered directly to the manufacturer. To maintain rigorous quality and security standards, the provider must furnish full material certifications, mill test reports, and comprehensive documentation. These requirements are essential for ensuring supply chain traceability and enforcing strict prohibitions against counterfeit materials. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

in about 17 hours

Precision Manufacturing of Pin-Rivets (NSN 5320-01-326-9549)This subcontract involves the precision manufacturing of 257 finished pin-rivets under NSN 5320-01-326-9549 to support prime contractors for the US Air Force Cold Start Project. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work requires strict adherence to configuration control, counterfeit prevention protocols, and full supply chain traceability. The manufacturer must perform precision machining and forming, ensuring all items are inspected and packaged according to ASTM D3951 and MIL-STD-129, with palletization meeting RP001 standards. Additionally, the contractor is required to maintain a positive assessment within the Supplier Performance Risk System to ensure compliance with Department of Defense quality and reliability requirements.

Aircraft Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 17 hours

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Supply of Certified Aviation-Grade Transparent MaterialsThis subcontract involves the supply of certified aviation-grade transparent materials, including specialized acrylics, polycarbonates, and optical-grade glass, for prime contractors working on DLA Weapons Support ASC projects. All materials must strictly adhere to TDP Reference Drawings 76823 and 98749, and the provider is required to ensure full traceability and provide comprehensive material certifications. Managed by the Department of Defense under NAICS code 326199, the contract mandates JCP certification for any export-controlled specifications. The solicitation was posted on October 16, 2026, with a response deadline of October 19, 2026.

All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aircraft Windshield Panel Fabrication (CSI)This subcontract involves the fabrication of aircraft windshield panels for prime contractors supporting DLA Weapons Support ASC projects. The selected provider is responsible for manufacturing and testing 15 finished panels in strict accordance with TDP Reference Drawings 76823 IT-51, 76823 IT-33, 98747, and 98749, as well as QAP I3873 QAP-020. Final deliverables must include the completed panels along with Product Verification Test samples and all required quality documentation. To qualify for this effort, the contractor must maintain CMMC Level 2, AS9100, and JCP certifications to ensure the secure handling of export-controlled data. The project falls under NAICS code 336413 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Pin-Rivet Collar Manufacturer/SupplierThis subcontract involves the manufacture and supply of 9,062 Pin-Rivet Collars (NSN 5320-01-490-9746) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The supplier must adhere to strict quality and technical standards, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331, while maintaining compliance with Configuration Control and Critical Application Item standards. Logistical requirements include packaging according to ASTM D3951 and marking per MIL-STD-129. The contractor is responsible for providing EPA-approved Consumer Information Sheets and ensuring full supply chain traceability under C03. Final delivery of the inspected collars is to be completed FOB Origin to Hill AFB, UT.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Packaging and Marking Services

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS