Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Nylon Sling

Active
Z5004State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids for nylon slings under solicitation Z5004, with a response deadline of August 20, 2026. The requirement includes two specific sizes of 2 inch wide nylon slings: one at 30 inches long and another at 42 inches long. Both specifications require protective covering on both sides, including the eye, and must adhere to minimum safe working loads of 4500 lbs for vertical lifts, 3600 lbs for choker lifts, and 9000 lbs for basket lifts. Each sling must feature an identification tag stamped with the safe working load, placed in a non working area, with the 42 inch version specifically requiring a weatherproof tag and reverse eye type. Approved manufacturers include Custom, Volwire, Liftall, Certex, and Ashslga. The procurement is managed by the Nashville Electric Service in Tennessee, and interested parties should coordinate with the primary procurement contact for submission.

General Info

Nashville Electric Service seeks bids for specific nylon slings by August 20, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

339994 - Broom, Brush, and Mop ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z5004 Request for Bid - Nylon Slings

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, USA
Contacts
Procurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLING NYLON 30 INCH NYLON SLINGS, 2" WIDE 30" LONG, PROTECTIVE COVERING BOTH SIDES INCLUDING EYE. MINIMUM SAFE WORKING LOAD IN LBS. VERTICAL 4500 CHOKER 3600 BASKET 9000 EACH SLING TO HAVE THE SAFE WORKING LOAD STAMPED INTO A LEATHER IDENTIFICATION TAG. THE TAG IS TO BE PLACED IN A NON WORKING AREA. Approved Manufacturers and/or Part Numbers: CUSTOMSRE1-802X30IN VOLWIRERE1802-30 LIFTALLRE-1-80230INCH CERTEXRE-2-902X30 ASHSLGASI-RE2-802X30 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 12EA EM24284954000 2 SLING NYLON 42 INCH NYLON SLING, 2" WIDE, 42" LONG, PROTECTIVE COVERING ON BOTH SIDES INCLUDING EYE, REVERSE EYE TYPE. MINIMUM SAFE WORKING LOAD IN LBS. VERTICAL 4500 CHOKER 3600 BASKET 9000 EACH SLING TO HAVE THE SAFE WORKING LOAD STAMPED INTO A WEATHERPROOF IDENTIFICATION TAG. THE TAG IS TO BE PLACED IN ANON WORKING AREA. Approved Manufacturers and/or Part Numbers: VOLWIRERE1802-42 LIFTALLRE-1-80242INCH CERTEXRE-2-902X42 Page: RFB: Close Date: Z50048/20/2026 2 ASHSLGASI-RE2-802X42

Similar Contracts

Same NAICS industry code

NAICS: 339994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-Q-1437
This contract is for the procurement of 52,274 chamber cleaning brushes under solicitation SPE7L1-26-Q-1437, issued by the Department of Defense Land Supply Chain. The delivery timeline is set for 200 days after order, and the requirement is designated as a total small business set-aside. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, with a specific packaging update replacing PD AM8432358 Revision J with Revision K. The contract involves the use of Government Furnished Equipment and Material, specifically requiring one M4A1 barrel assembly for testing purposes. Testing must adhere to STMs 301 and 302, with a limit of 500 function tests per barrel. Due to the nature of the items and materials, the contract mandates a security preaward survey and strict compliance with DFARS regulations regarding the safeguarding and disposal of sensitive conventional arms, ammunition, and explosives.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 339994
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E5-26-Q-0394
This firm fixed price contract is for the procurement of 13 identification markers, part number 7690-01-693-3728, with a delivery requirement of 60 days after receipt of order. The items are designated as critical application items and must comply with FAA bare item marking requirements and airworthiness approval. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331, and maintain supply chain traceability documentation per DLA Directive Procurement Note C03. Packaging and palletization must follow MIL-STD-129 and RP001 requirements. The procurement is governed by the technical and quality requirements set forth in the DLA Master List and the provided Technical Data Package.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 339994
New
DIBBS
CLIP, HEADBAND HELME
Solicitation # SPE1C1-26-Q-0410
Solicitation SPE1C1-26-Q-0410 is a Firm Fixed Price request for the manufacture and delivery of 264 Team Wendy headband helmet clips, part number 80-CAK-BP, under NSN 8470-01-729-3458. The requirement is split across four delivery locations, including Marine Aviation Logistics Squadron 26 in Jacksonville, NC, and the USS George Washington and USS George H.W. Bush. Delivery is required within 100 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to high-level quality standards, specifically ANSI/ISO/ASQ Q9001-2015 or an equivalent, and maintain supply chain traceability documentation. Packaging and marking must comply with MIL-STD-129, MIL-STD-147, and MIL-STD-2073-1E, with palletization following DLA requirement RP001. Administration is handled through the DLA Troop Support C and T Supply Chain, requiring electronic invoicing via the VIM-ASAP and WAWF systems. This is not a small business set-aside, and the solicitation incorporates various FAR and DFARS clauses regarding security prohibitions, cyber incident reporting, and defense priorities.
C AND T SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 26 days
View Details
NAICS: 339994
New
DIBBS
CLOTH, CLEANING
Solicitation # SPE8E5-26-T-3962
This contract is a solicitation from the Defense Logistics Agency for the procurement of cleaning cloths, identified by NSN 7920-01-614-3522 and part number 599306. The requirement is for two boxes, with each box containing 100 units. Delivery is required within 20 days after receipt of order, with a required delivery date of August 13, 2026. The items are to be delivered FOB Origin and will be inspected and accepted at the destination. The contract specifies strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A critical shelf life requirement of 12 months applies to these items, designated as Type 2 Code 4. Shipping must be conducted via traceable means to the designated facility at Fort Buchanan, and all government identification must be removed from any non-accepted supplies.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 339994
New
DIBBS
Supply of Artist’s Brushes (Type II, Oil and Water Colors)
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
New
DIBBS
BRUSH, ARTIST'S
Solicitation # SPE8E9-26-Q-0673
This contract solicits 1,224 artist’s brushes, NSN 8020-00-598-5907, specified as Type II: Oil and Water Colors, Class 2: Pure Red Sable Hair, Style A: Round, Single Taper Point, size 13/64 inch, to be delivered in firm fixed price terms under solicitation SPE8E9-26-Q-0673. The supplies must conform to the technical and quality requirements outlined in Basic CID A-A-3191A Revision A dated April 28, 2010, and must comply with MIL-STD-129R(3) Revision R dated February 25, 2023, and MIL-STD-2073-1E(4) Revision E dated June 27, 2024, for packaging and marking. All packaging shall adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all palletization must follow RP001: DLA Packaging Requirements for Procurement. The brushes must be labeled and marked per MIL-STD-129, and any hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200, with Safety Data Sheets submitted pre-award meeting Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. Delivery is required within 60 days after order date to DLA Distribution Warner Robins at Robins AFB, Georgia, with FOB origin terms applying and no variance permitted in quantity. Inspection and acceptance occur at destination, and the contractor is fully responsible for compliance. The solicitation incorporates the DLA Master Solicitation for eProcurement Automated Simplified Acquisitions Revision 99 and applies multiple FAR and DFARS clauses covering cybersecurity, including safeguarding Covered Defense Information under DFARS 252.204-7012, antitrust, whistleblower protections, small business representation, transportation, hazardous materials, export controls, payment terms, and disputes resolution, with alternative dispute resolution mandated. All offers must be submitted through the DIBBS system, and offerors must maintain current SAM registrations with accurate representations and certifications. The contract explicitly excludes small business set-asides and requires compliance with cyber incident reporting, prohibition
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
New
Federal
FY26 Broom Cassettes
Solicitation # FA462026QA273
The solicitation FY26 Broom Cassettes, identified by solicitation number FA462026QA273, is a combined synopsis and solicitation issued by the Department of Defense through the office FA4620 92 Cons Lgc located at Fairchild Air Force Base in Washington. This procurement is exclusively set aside for small businesses under the SBA Total Small Business Set Aside, with the NAICS code 339994 indicating classification under Other Miscellaneous Manufacturing. The opportunity was posted on August 10, 2026, and responses must be submitted no later than August 17, 2026, at 5:00 PM Eastern Time. Performance of the contract will occur at Fairchild AFB, WA, with a ZIP code of 99011. Primary point of contact is Mirion Draper, reachable at 509-247-8138 or mirion.draper@us.af.mil, with secondary support provided by Sarah O'Neil at 509-867-1279 or sarah.oneil.1@us.af.mil. All interested parties must refer to the official SAM.gov link for full details and submission requirements.
FA4620 92 Cons Lgc

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
DIBBS
BRUSH, CLEANING, TOOL
Solicitation # SPE8E5-26-Q-0388
The Defense Logistics Agency is soliciting one unit of a cleaning brush, identified by NSN 7920-12-399-7384 and associated part numbers DECKMA HAMBURG GMBH C3943 P/N 77555 and ATZ MARINE TECHNOLOGIES LTD DBA U0ZM2 P/N 77555, under solicitation SPE8E5-26-Q-0388, issued on August 7, 2026, with responses due by August 17, 2026. The requirement is for a Firm Fixed Price contract with no variance allowed in quantity, delivery due 60 days after order date, and FOB Origin terms, though a conflicting mention of FOB Destination exists in the document. Inspection and acceptance occur at the destination, with the consignee specified as USNS ROBERT F. KENNEDY T-AO 208 at FPO AE 09592-4500, and freight shipments must be sent via traceable means excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. The contract incorporates a wide array of FAR and DFARS clauses including cybersecurity protections under 252.204-7012, prohibitions on covered defense telecommunications equipment under 252.204-7018, Buy American requirements under ALT II of 252.225-7001, whistleblower protections, antiterrorism training, electronic payment obligations via WAWF, and mandatory SAM representations regarding foreign ownership, defense equipment, and tax exemptions. Contractors must retain supply chain traceability documentation and comply with all relevant export controls and restrictions on minerals and materials. Quotations must be submitted exclusively through the DLA Internet Bid Board System, and payment will be processed electronically with accelerated payments available for small business subcontractors. The procurement falls under NAICS code 339994 and is not set aside for any specific small business category.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
DIBBS
BRUSH, CLEANING, TOOL
Solicitation # SPE8E5-26-Q-0389
The contract specifies the procurement of 10 units of a cleaning brush, item number 7920-12-399-7384, under solicitation SPE8E5-26-Q-0389 issued by the Defense Logistics Agency through its eProcurement system. The requirement is for a firm fixed price with zero variance in quantity, and delivery is due within 60 days after order date, with a required ship date of June 8, 2026. The product must conform to specified technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging and labeling must follow MIL-STD-129, with palletization adhering to DLA Packaging Requirements, and the unit of issue and quantity per unit pack must match the contract specifications. The item may be sourced from either DECKMA HAMBURG GMBH C3943 P/N 77555 or ATZ MARINE TECHNOLOGIES LTD DBA U0ZM2 P/N 77555. Delivery is to be made to the USNS COMFORT at FPO AE, with freight shipping instructions prohibiting parcel post and requiring the fastest traceable means. The contract includes stringent cybersecurity and information safeguarding requirements, mandating compliance with DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting. Additional requirements include adherence to the Buy American Act with Alternate II, antiterrorism awareness training, prohibition of certain foreign-sourced equipment under DFARS 252.204-7018, and the prohibition of fluorinated aqueous film-forming foam. Offerors must submit quotes via the DIBBS portal by the deadline of August 17, 2026, and comply with all representations and certifications maintained in SAM.gov, including those related to foreign ownership, trade agreements, and economic price adjustments. Invoicing must be processed electronically through WAWF using prescribed routing data, with payment governed by prompt payment clauses and electronic funds transfer. All contractual obligations are subject to the DLA Master Solicitation for eProcurement, Revision 105, and incorporate numerous FAR and DFARS clauses regarding disputes, changes, subcontracting, employment reporting on veterans and paid sick leave, sustainable products, and whistleblower rights. Government identification must be removed from non
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
DIBBS
BRUSH, CLEANING, TOOL
Solicitation # SPE8E5-26-Q-0390
The solicitation SPE8E5-26-Q-0390 issues a firm fixed price contract for two cleaning brush tools identified by NSN 7920-12-399-7384, with approved part numbers including DECKMA HAMBURG GMBH C3943 P/N 77555 and ATZ MARINE TECHNOLOGIES LTD DBA U0ZM2 P/N 77555. Delivery is required 60 days after award destination with FOB origin terms, and the item must be shipped to the parcel post address of USNS ARCTIC T AOE 8, FPO AE 09564, or freight shipping address at the same location. The contract requires strict adherence to the DLA Master List of Technical and Quality Requirements, with all packaging and marking compliant with MIL-STD-129, and palletization in accordance with DLA Packaging Requirements. While ASTM D3951 provides baseline packaging standards, DLA requirements supersede them. The solicitation includes comprehensive cybersecurity and supply chain security clauses such as DFARS 252.204-7012 for safeguarding covered defense information, DFARS 252.204-7018 prohibiting acquisition of certain telecommunications equipment, and DFARS 252.225-7001 for Buy American compliance, along with restrictions on magnets, tantalum, and tungsten. Offerors must complete SAM representations including those related to foreign ownership, tax exemptions, and inverted domestic corporations. Inspection and acceptance occur at the destination point under FAR 52.246-2, and payment must be processed electronically through WAWF. The solicitation mandates submission via DIBBS by August 17, 2026, and incorporates the DLA Master Solicitation Revision 105 along with numerous other FAR and DFARS clauses governing ethics, labor, reporting, and security. No small business set-aside applies, and the government does not provide a bidset.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
SLED
ENHANCED PATROL RIFLE PACKAGES
Solicitation # FIN-0803
The Town of Plainfield, Connecticut, is soliciting sealed proposals from qualified vendors to supply twenty-five complete Enhanced Patrol Rifle Packages for its Police Department, with each package containing a Colt Enhanced Patrol Rifle II PRO with an 11.5-inch barrel, an Aimpoint PRO optic, a Magpul MS1 sling, GrovTec sling swivels, a Streamlight ProTac Rail Mount 1 light, a Savior Equipment American Classic Double Rifle Bag, and all necessary mounts, hardware, and batteries. All components must be professionally installed by a certified armorer, fully inspected for safety and function, and delivered in service-ready condition with proper documentation including serial numbers, armorer certifications, and completed National Firearms Act transfer paperwork. Proposals must be submitted in sealed envelopes to the Finance Department at Plainfield Town Hall no later than 12:00 P.M. on August 27, 2026, and will be publicly opened at that time; proposals received after the deadline will be returned unopened and all submitted proposals must remain valid for sixty days following submission. The award will be made using a trade-off methodology, weighing cost competitiveness at 55 percent, contractor experience and qualifications at 25 percent, ability to meet schedule at 10 percent, references and past performance at 5 percent, and completeness of proposal at 5 percent, with no requirement to select the lowest-priced bid. Each rifle package must be packaged in the specified Savior Equipment double bag, clearly labeled as approved by the Plainfield Police Department, and accompanied by a detailed itemized packing list and firearm identification list. All items must be new, unused, factory-original, and delivered to the Plainfield Police Department at 210 Norwich Road for inspection and acceptance, which will occur within ten business days of delivery; delivery does not constitute acceptance, and the contractor retains responsibility for the condition of the equipment until formal acceptance. The Town requires full compliance with MIL-STD-1913 for Picatinny rail mounting, manufacturer specifications, and all federal, state, and local firearms laws, with no substitutions permitted unless authorized in writing. The contractor must be registered with the Connecticut Secretary of the State, hold a valid Federal Firearms License, certify compliance with affirmative action and equal employment requirements, and indemnify the Town against all claims arising from defective products or improper installation. Insurance requirements include $1 million per occurrence commercial general liability, $1 million errors and omissions coverage, and the Town must be named as an additional insured.
DAS Procurement

POSTED

9 days ago

DEADLINE

in 12 days
View Details
NAICS: 339994
SLED
Tasers
Solicitation # 0000039963
The State of California is soliciting bids for Tasers and related equipment under solicitation number 0000039963, with a response deadline of August 18, 2026, at 5:00 PM Pacific Time. The contract includes the supply of Tasers, Taser batteries, and associated warranties, with performance required in West Sacramento, California, 95605. All inquiries must be directed to Khadija Hamid at the California Department of Justice, via phone or email, as Biddingo.com provides only informational content and is not responsible for the accuracy or completeness of the bid details. Vendors interested in participating must register on the State of California’s official procurement portal, and all bid-related questions concerning language, terms, or missing information must be addressed directly to the originating agency. The contracting officer listed is not the primary contact for this solicitation; communication should follow the provided state contact details.
State of California

POSTED

9 days ago

DEADLINE

in 4 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 339950
New
SLED
Supply of 42-Inch Nylon Lifting Slings
Sign Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339950
New
SLED
Supply of 30-Inch Nylon Lifting Slings
Sign Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 315999
New
SLED
Supply of High-Visibility Flagman Vests (Class 3, Level 2, Mesh, XL)Nashville Electric Service is seeking a subcontractor for the manufacture and delivery of high-visibility flagman vests. The required garments must be size XL, constructed from mesh material, and fully compliant with ANSI/ISEA 107-2010 Class 3, Level 2 standards. Each vest must feature specific coloring, reflective striping, and custom NES logo printing. This procurement opportunity was posted on August 14, 2026, with a response deadline of August 19, 2026. The performance of the contract will take place in Nashville, Tennessee, under NAICS code 315999. Interested parties can find further details and submit responses through the official vendor portal.
Other Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 312111
New
SLED
Sports Drink Mix
Solicitation # Z4999
The Nashville Electric Service in Tennessee has issued solicitation Z4999 for the procurement of grape-flavored sport drink mix. The required product is a zero sugar and zero calorie powder mix provided in 0.10 ounce packets, with the approved manufacturer or part number listed as ALLSPOR10122525. This opportunity was posted on August 14, 2026, and requires a response by August 19, 2026. The place of performance is located in Nashville, Tennessee, and interested parties should coordinate with the primary procurement contact, K. Kegley, for further details.
Soft Drink Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
SLED
Coaxial Cables
Solicitation # Z5005
Nashville Electric Service has issued solicitation Z5005 for the procurement of coaxial cable connectors designed for 7/8 inch radiating foil shield transmission lines. The requirement includes both N female and N male straight connectors from the RLF, RLK, and RAY78-50A series. These components must feature a nominal impedance of 50 ohms, a maximum frequency of 3.7 GHz, and an IP68 waterproof rating. Technical specifications require a brass body with tri-metal plating and silver-plated copper inner and outer contacts, utilizing shrinking sleeve sealing. Approved manufacturers include CommScope, specifically part numbers PR5PNF and PR5PNM, or equivalent alternatives. The solicitation was posted on August 14, 2026, with a response deadline of August 20, 2026. Performance will take place in Nashville, Tennessee, and interested parties may coordinate with procurement contact Alan Martinez.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339950
New
SLED
Sign Decal
Solicitation # Z5000
Nashville Electric Service is soliciting bids for Hot Line Tool Inspection Labels under solicitation Z5000. The required decals must measure 1 1/4 by 13 inches, feature self laminating adhesive, and comply with OSHA 1910.269 standards. Each label must include specific fields for the inspection date, test date, and employee number. Approved manufacturers or part numbers include JHARLENU15102-HSG2, SAFETYCAS2640, and LEMPRODNESHSTOOL. The response deadline for this procurement is August 20, 2026, with the place of performance located in Nashville, Tennessee. Interested parties should contact the procurement office via the provided contact details or the vendor portal.
Sign Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456130
New
SLED
Safety Glasses
Solicitation # Z5001
Nashville Electric Service is soliciting bids for safety glasses under solicitation number Z5001. The required equipment must feature blue mirror lenses with anti-fog and anti-scratch properties and must fully comply with all ANSI Z-87.1 standards. Approved options include UVEX S2975 and CROSSFIRE CF16278. The response deadline for this solicitation is August 20, 2026, at 7:00 PM. The contract is based in Nashville, Tennessee, and interested parties should contact the procurement office via the provided contact details or through the official vendor portal.
Optical Goods Retailers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 315990
New
SLED
Bandana
Solicitation # Z5002
Nashville Electric Service is soliciting bids for flame-resistant evaporative cooling bandanas under solicitation Z5002. The required equipment must feature activated polymers for cooling relief and provide FR protection for personnel working on or near energized parts. To ensure safety and compliance, the bandanas must meet ASTM F 1506 standards and possess an NFPA 70E/HRC=1 rating. Acceptable colors for the bandanas are blue, lime, gray, or red, with approved manufacturers and part numbers including Ergodyne 6705FR and Occunomi 940-FR11. This solicitation was posted on August 14, 2026, and the deadline for responses is August 20, 2026. The place of performance is located in Nashville, Tennessee.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
New
SLED
Flagman Vest
Solicitation # Z5003
Nashville Electric Service is soliciting bids for the procurement of Class 3, Level 2 high visibility flagman vests in size XL. The vests must be constructed of mesh material in either yellow or green base colors with two tone trim and must comply with ANSI/ISEA 107-2010 standards. A critical requirement is the inclusion of an approved NES logo printed in black ink on the back, measuring 9 inches wide by 8 7/8 inches high. This solicitation, identified as Z5003, accepts products from approved manufacturers including MCR, Estex, Gearog, Radian Wear, and Ergodyne. Interested vendors must submit their responses by August 19, 2026. The contract is managed by the Nashville Electric Service in Tennessee, with all performance and delivery taking place in Nashville.

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335311
New
SLED
Lightning Arrester Supply (18 kV, 5 kA, 5 µs, 1.2/50 µs, 6.4 kJ)
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Freight and Delivery Logistics
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
SLED
Fiberglass Ground Sleeve Supply
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details