Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-T-911WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits 10 O-rings identified by NSN 5331-01-661-6032 under solicitation number SPE7L1-26-T-911W, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after award. The items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. Source approval documentation is required as per RC001, and covered defense information guidelines may apply. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be approved unless explicitly authorized. Asbestos is banned from all supplied items, and any alternative materials must be validated per Clause L30 and Provision 4 conditions. The contracting activity is under the Department of Defense, Land Supply Chain, with performance set in Norfolk, Virginia, and primary point of contact is Kristina Derry via email and phone.

General Info

10 O-rings NSN 5331-01-661-6032 due Aug 17, 2026, deliver in 20 days, DLA standards, no ozone-depleting chemicals or asbestos.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

1968 MORRIS STREET, NORFOLK, VA, 23511, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-911W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-661-6032 Quantity: 10 EA Purchase Request: 7017727130QTY: 10 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
COVER ASSEMBLY
Solicitation # SPE4A5-26-T-328G
The contract pertains to the procurement of a COVER ASSEMBLY with part number 3171222-1 and NSN 4820-01-154-5527, for a quantity of 13 units, under solicitation SPE4A5-26-T-328G. Delivery is required FOB origin with a lead time of 171 days, and the item must be delivered by January 31, 2027, with the original required delivery date set for March 24, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA’s packaging requirements RP001, with palletization also governed by those standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications and includes referenced requirements such as RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RT001 for measuring and test equipment. Unit Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All documentation and compliance obligations are governed by the applicable revision of the DLA Master List on the solicitation issue date. The delivery destination is Tinker AFB, Oklahoma, and transportation instructions must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE, LINE PIERCING
Solicitation # SPE7MC-26-T-115P
The contract requires the procurement of 75 units of a Commercial Off the Shelf line piercing valve equipped with a depressor valve and needle valve shut-off, a dust cover, and a neoprene seal, designed to fit 3/16, 1/4, and 5/16 inch O.D. tubing. The item is identified by NSN 4820-00-499-2211 and must be delivered as an end item tool kit. Strict prohibitions ban the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements without relieving compliance with product performance standards. All substitutions or alternative materials require prior approval. The valve must be packaged in compliance with ASTM D3951 and further meet DLA RP001 packaging requirements for procurement, including palletization standards. Packaging and labeling must adhere to MIL-STD-129 for shipment and storage, incorporating bar-coding as mandated. Inspection and acceptance occur at the destination, with the government conducting final evaluation under FAR 52.246-2. Delivery is FOB origin with a 161-day performance period, targeting a shipment date of December 25, 2026, to the designated DLA Distribution facility in New Cumberland, PA. The contract is fixed-price with zero variance allowed on quantity, and payment must be processed electronically via Wide Area WorkFlow using an invoice and receiving report. The contracting officer has not yet defined the specific contract type, and all contractor representations, certifications, and socioeconomic status disclosures are left to offerors during proposal submission. Compliance with safeguarding defense information controls, trafficking in persons policies, employment eligibility verification, and hazardous material reporting is mandatory, and the supplier must be capable of providing the item as a true COTS product without unauthorized modifications. The award will be based on a solicitation issued July 5, 2026, with proposals due by July 16, 2026, submitted exclusively through the DLA Internet Bid Board System.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
RETAINER, PLANETARY
Solicitation # SPE4A5-26-T-327B
The contract pertains to the procurement of six planetary retainers, identified by NSN 2910-01-641-3642, under solicitation SPE4A5-26-T-327B issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense. The requirement is for delivery within 171 days of award, with response submissions due by August 12, 2026. Technical and quality mandates are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and physical identification of bare items is required, though Item Unique Identification is waived per the Service customer’s request, invoking DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must be adequate to ensure compliance. Covered defense information is subject to applicable protections, and performance is designated for Cherry Point, North Carolina, with Steven Lewis as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-915H
The contract pertains to the procurement of 149 units of an O-RING with NSN 5331-01-599-7035 under solicitation number SPE7L1-26-T-915H, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. The delivery timeline is 140 days after contract award, with performance occurring at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the NAICS code is 336310. Primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE AND SLEEVE SET A
Solicitation # SPE4A5-26-T-322P
The contract is for a matched valve and sleeve set assembly, metering type, identified by part number 3601509-1 and NSN 4820011138349, supplied by Honeywell International Inc. A total of 43 units are required at a unit price of $43.00, with delivery set for 171 days after award. The item is classified as a critical application item and must conform to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any other standards. The supplier must comply with DLA packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for general packaging, and RP001 for palletization, with all packaging and labeling adhering strictly to government specifications. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The supplier is required to perform a Cybersecurity Maturity Model Certification Level 2 self-assessment, and measuring and test equipment must be appropriately calibrated and documented. Delivery is FOB origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. The shipment must be ready by January 31, 2027, with the original delivery deadline set for April 30, 2027. All packaging, marking, and transportation must align with DLA Procurement Notes C19 and C20, and the unit of issue is strictly EA as defined in the DLA authorization. The contract is governed under solicitation SPE4A5-26-T-322P, with no variance allowed in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
IMPELLER, PUMP, CENTRIFU
Solicitation # SPE7LX-26-U-8885
This contract is an indefinite delivery contract for the procurement of centrifugal pump impellers, identified by NSN 2910016319020 and part number 106369, under solicitation SPE7LX-26-U-8885, issued by the Defense Logistics Agency Land and Maritime’s Strategic Acquisition Program Directorate. The contract is a total small business set-aside under NAICS code 336310 with a maximum value of $350,000 and an estimated initial quantity of six units, delivered FOB origin within 88 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to MIL-P-16789 for pump packaging and preservation, MIL-STD-2073-1E for packaging practices, and MIL-STD-129 for labeling and barcoding. The impeller must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. All packaging and marking must comply with DLA-specific packaging requirements, and government-issued identification must be removed from non-accepted supplies. Payment and invoicing are required through Wide Area WorkFlow, with acceptance and inspection occurring at the destination. The contract incorporates multiple FAR and DFARS clauses, including provisions for safeguarding contractor information systems, prohibited substances like hexavalent chromium and toxic materials, subcontracting requirements for commercial products, and mandatory representations regarding small business status, UEI, and CAGE codes. Offerors must submit Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and comply with OSHA’s Hazard Communication Standard. The solicitation requires adherence to strict documentation and representation protocols, including electronic submission of proposals via standard forms, and the contract is subject to deviations applied to several clauses regarding system security, contract types, and small business representation. The point of contact is Theodore Misiolek, and submissions must be received by August 4, 2026, with no option quantities or unit pricing provided in the base solicitation.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L1-26-T-914E
This contract pertains to the supply of four fuel injection nozzles, part number 4234350 with NSN 2910-01-560-5519, to be delivered to the Marine Corps Engineer School at Camp Lejeune, North Carolina. The delivery must be completed within 20 days of award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements, with palletization following RP001 guidelines, and no ozone-depleting chemicals are permitted under any circumstance. The supply must be shipped via traceable freight methods—parcel post is explicitly prohibited—and must be delivered by July 30, 2026. The contract is issued under solicitation SPE7L1-26-T-914E, with the unit of issue being each, at a total price of $4.00, and all technical specifications are governed by the DLA’s authoritative system.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-912X
The contract pertains to the procurement of O-RINGS identified by NSN 5331-01-591-0214, with a total quantity of 3 packing groups, each equivalent to 10 units, for a total of 30 units. Delivery is required within five days of award, and the purchase is linked to request number 7017727133. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions in effect on the solicitation issue date or award date depending on the acquisition type. For simplified acquisitions, the revision active on the solicitation issue date or award date applies, while for larger acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. All supplies must comply with the provision requiring removal of government identification from non-accepted items. The solicitation number is SPE7L1-26-T-912X, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 336310, and the contracting organization is the Department of Defense under the Land Supply Chain. The place of performance is FPO with ZIP 09645-0010, and the primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9257
The contract is for the procurement of 1,456 O-RINGS with NSN/Part Number 5331-01-545-0130 under solicitation SPE7LX-26-U-9257, issued by the Department of Defense’s Strategic Acquisition Program Directorate. All items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed prior to return. Documentation for source approval requests is required, and the delivery deadline is 88 days after award. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is designated as a total small business set-aside under NAICS code 336310. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
VALVE, PROPORTIONAL
Solicitation # SPE4A5-26-T-322X
This contract specifies the procurement of a single proportional valve identified by NSN 4820-01-439-0288 and part number 3605239-2 from Honeywell International Inc. under solicitation SPE4A5-26-T-322X. The item is classified as a commercial item and is designated as a critical application item requiring strict adherence to technical, quality, and cybersecurity standards. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Packaging must comply with MIL-STD-129 and ASTM D3951, subject to precedence of DLA standards, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor must comply with CMMC Level 2 self-assessment and implement physical identification marking per RQ017. Configuration changes require formal engineering change proposals and variance requests. Delivery is due within 171 days FOB origin to Hill AFB, Utah, with inspection and acceptance occurring at destination. The unit of issue is each, quantity is one, and no variance is permitted. The item must be delivered by January 31, 2027, with the original required delivery date of July 30, 2027. All transport and shipping instructions follow DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9229
This contract specifies the procurement of a fluid filter element identified by NSN 2910-01-524-3009, with a quantity of 974 units, under solicitation SPE7LX-26-U-9229. The item is designated as a critical application requiring government engineering source approval and is restricted to approved manufacturers including PATRIA LAND SYSTEMS OY, WIX CORP, PARKER-HANNIFIN CORPORATION, and ROSOMAK S.A. Delivery is required within 72 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede other standards, and requires packaging in compliance with ASTM D3951 and labeling per MIL-STD-129, with palletization following RP001 guidelines. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. This is a total small business set-aside under NAICS 336310, with responses due by August 19, 2026, and the government retains full control over configuration changes, deviations, and waiver requests.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
ADJUSTING, SCREW VAL
Solicitation # SPE7MC-26-T-166J
The contract pertains to the procurement of one adjusting screw valve, identified by NSN 4820-01-486-4802 and part number B4024 from Dante Valve Company, specified as a critical application item made of copper alloy. The item must not contain or come into direct contact with mercury or mercury-containing compounds, except under strictly defined exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods and materials, with no special marking required. The item must be delivered FOB destination within 20 days, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Shipment must be via fastest traceable means, not parcel post, to the vessel shipment address USS GABRIELLE GIFFORDS LCS 10, FPO AP 96694, with specific DLA vendor procedures and transport directives applying. The contract is issued under solicitation SPE7MC-26-T-166J, with a required delivery date of July 31, 2026, and falls under NAICS code 336310, managed by the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-T-915W
The contract specifies the procurement of 20 units of STRAP, WEBBING with NSN 5340-01-357-0800 under solicitation SPE7L1-26-T-915W, with a required delivery date of October 1, 2026, and a 44-day lead time. All items must be delivered FOB origin with no variance in quantity allowed and are subject to final inspection and acceptance at the destination. Packaging must comply with DLA’s master requirements, prioritizing MIL-STD-129 for marking and labeling, and adherence to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. Palletization must follow RP001 packaging guidelines, and all goods must be marked in accordance with MIL-STD-130N, though proprietary or insufficient identification is prohibited. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality criteria are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and revision control depends on solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation requirements are governed by DLAD procedural notes C19 and C20.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L1-26-T-915S
This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916A
This contract specifies the procurement of a helical compression spring identified by NSN 5360-01-026-1107 and part number TDP Rev A Gen 1 IAW MIL-STD-1330E, with a requirement for 17 units to be delivered within 154 days. The spring is designated as a critical application item requiring government engineering source approval and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific packaging, cleaning, and marking protocols. It mandates oxygen cleaning and packaging in accordance with MIL-STD-2073-1E and MIL-STD-129, with each unit container labeled with an O2 cleaning certificate and marked with “SPECIAL CLEAN O2-N2.” The item is subject to a zero variance in quantity and is to be delivered FOB origin to Industries of the Blind Inc in Greensboro, NC, with inspection and acceptance occurring at destination. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for limited functional applications authorized by NAVSEA, such as in batteries or sensors, with additional containment requirements for portable items. It enforces configuration change management through Engineering Change Proposals and requires suppliers to comply with Qualified Products Lists or Qualified Manufacturers Lists where applicable. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information protocols are also binding. The item is classified as a restricted source, and the supplier must adhere to the DLA Packaging Requirements and Transportation Procedures noted in DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-916A, with a response deadline of August 17, 2026, and a required shipment date of January 19, 2027, under a fixed unit price of $17.00 per unit.
Spring Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details