Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

O-RING

Active
SPE7L3-26-T-136TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 82 O-rings with NSN/Part Number 5331-01-165-1343, under solicitation SPE7L3-26-T-136T, with a response deadline of August 10, 2026, and delivery required within 136 days after award. The items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless superseded by an amendment. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. The contractor is required to retain supply chain traceability documentation as mandated by DLA Procurement Note C03 from August 2016, ensuring full traceability through the supply chain. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitution requires prior approval unless already authorized by specification. Items must be completely free of asbestos, and any alternative materials must be formally approved under Clause L30 and Provision 4 conditions. The delivery location is Albany, Georgia, with Rajesh Sehgal designated as the primary point of contact.

General Info

Procure 82 O-rings, NSN 5331-01-165-1343, deliver to Albany GA by 136 days post-award, comply with DLA standards, no ozone-depleting chemicals or asbestos.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-136T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Rajesh Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 5331-01-165-1343 Quantity: 82 EA Purchase Request: 7016879175QTY: 82 Delivery: 136 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
O-RINGThis contract is for the procurement of an O-ring identified by NSN 5331-00-498-5755, supplied in a package of 100 units and governed by stringent military and commercial specifications. The item is classified as a commercial item of a type and must comply with MIL-DTL-25988/1B or its SAE AMS-R-25988B equivalent, with manufacturing required to adhere to the latest revision of the governing standard as of the solicitation date. It is designated as a critical application item with a non-extendable shelf life of 240 months and is subject to Type I ozone-depleting chemical prohibitions, requiring any substitute materials to be pre-approved unless explicitly authorized by the specification. Packaging must conform to MIL-STD-2073-1E, incorporating a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 for UV protection, and marking must follow MIL-STD-129 with special shelf-life identification code 32. Packaging and palletization must meet DLA’s proprietary requirements, and no asbestos is permitted. Sampling and inspection protocols require adherence to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated in the contract. Verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Delivery is FOB origin with a 20-day lead time, no variance allowed in quantity, and acceptance occurs at destination. The item must be shipped via traceable freight—not parcel post—to the specified Tinker AFB address, with specific DLA packaging, marking, and unit of issue codes strictly enforced. Solicitation SPE7M4-26-T-290C is open to full and open competition, with technical and quality requirements sourced from the DLA Master List, and contractual obligations supersede any conflicting material specifications.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADEDThe item is a grooved headed pin, identified by NSN 5315-01-650-1734, with a quantity of two units required under purchase request 7017204298. Delivery is mandated within ten days of award. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States, without prior government authorization. Access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling defense export-controlled data, and have received formal approval from the DLA controlling authority. The solicitation, issued by the ASC Commodities Division of the Department of Defense, is identified by number SPE4A6-26-T-10AR, was posted on July 28, 2026, with responses due by August 5, 2026. The North American Industry Classification System code is 332618, and performance is to occur in Charlotte, North Carolina, with Michael Jefferson listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICAnderson Metal Industries Inc is contracted to supply one unit of wire fabric with NSN 5335-01-451-0157 under contract SPE8E4-26-T-1934, with delivery required within 20 days to the USS NEW ORLEANS LPD 18 at FPO AP 96673. The product must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking applied. Packaging must be palletized per DLA procurement guidelines and shipped FOB destination with zero tolerance for quantity variance. The contract strictly prohibits intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable mercury-containing devices must have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions. All deliveries must align with DLA transportation procedures C19 and C20, and the product must be furnished using the DoD authorized unit of issue as defined by the official DLA reference. The contract was posted on July 28, 2026, with responses due August 10, 2026, and performance is tied to the NAICS code 332618 under the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThis contract specifies the procurement of 7/16 inch diameter, right regular lay, improved plow steel, galvanized wire rope with an IWRC core, delivered in four reels of 1,300 feet each as a single continuous length per reel. The material must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific requirements for packaging, labeling, and inspection outlined in RP001, RQ011, RQ017, and MIL-STD-2073-1E. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, with limited exceptions for specific functional uses certified by NAVSEA. Unit identification and tracking are not required per the service customer’s request, and the item has no shelf life. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full quantity must be delivered within 164 days of contract award. Packaging, marking, and palletization must comply with MIL-STD-129 and DLA packaging guidelines, with no special marking required. The delivery address is W1A8 DLA Dist San Joaquin in Tracy, CA, with a required ship date of January 17, 2027, and the contract reference is SPE4A5-26-T-312E under NSN 4010-01-096-7420.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SINGThis contract specifies the procurement of a single-leg chain assembly with a 3/8 inch chain size, Grade C, Class 4, measuring 20 feet from bearing surface to bearing surface. One end features a slip hook, Type V, Class 1, while the other end has a grab hook, Type V, Class 2. The item is identified by NSN 4010-00-176-7938 and part number 70-8-74, and must be manufactured in accordance with referenced technical and quality requirements from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated. Attributes are to be verified at specified levels: VII for critical, IV for major, and II for minor, with default classifications applied where unspecified. The chain and fittings must meet the technical data outlined in SPE4A5-26-T-265F, and casting or forging may be necessary, requiring the vendor to request tooling assistance through DLA if government-provided tooling is unavailable. The contract requires delivery of 50 units FOB origin within 20 days of award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 labeling, using new and unused containers. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking codes applied. Shipments must be sent by the fastest traceable means, excluding parcel post, and directed to the specified delivery point in Senatobia, Mississippi. The item has no shelf life requirement. The purchase request number is 7017112808, and the original required delivery date is June 8, 2026. The contract falls under NAICS 332618 and is managed by the Department of Defense’s ASC Supplier Operation OEM Division, with point of contact Hien-Van Trinh. All items must be sourced and delivered in full compliance with government procurement standards, including unit of issue alignment and logistical directives.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCKThe contract pertains to the procurement of a single unit of a PIN and LOCK component identified by NSN 5315-01-619-5144, with a required delivery within 20 days of award. The solicitation, numbered SPE4A7-26-T-598T, was posted on July 28, 2026, and responses are due by August 5, 2026. It falls under NAICS code 332618 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging must comply with DLA specifications, and the item must be properly marked per physical identification standards. Government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. The place of performance is APO, zip code 96694, and the primary point of contact is Brad Ingram, reachable via email and phone. All submissions must be made through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOWThe contract pertains to the procurement of 100 units of PIN, HOLLOW with NSN 5315-01-553-7017 and part number 136843 from Cadillac Gage, CAGE code 10237, under solicitation SPE4A6-26-T-10CH. Delivery is required within five days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking aligned to MIL-STD-129 and no special marking required. Palletization must adhere to DLA packaging requirements. Quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating both tailored and non-tailored higher-level standards, including ISO 9001:2015 for manufacturers and non-manufacturers. Any configuration changes require an Engineering Change Proposal or formal variance request. The unit of issue is each, priced at $100.00 per unit with a total contract value of $10,000. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThe contract pertains to the procurement of 109 O-rings identified by NSN 5331-01-250-6307, with a delivery requirement of 20 days after delivery order. The solicitation number is SPE7L1-26-T-884T, posted on July 28, 2026, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, is prohibited without prior authorization. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training and the DLA questionnaire, and receive formal approval to access controlled data. The contract falls under NAICS code 332618 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. Cybersecurity compliance requires certification by a CMMC Level 2 certified third-party assessment organization.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThis contract specifies the procurement of an O-RING under solicitation SPE7L1-26-T-884C, with a requirement for two units to be delivered within five days of award, FOB origin, to Fort Bragg, North Carolina. The item is identified by NSN 5331-01-471-6187 and purchase request 7017636760, with a unit price of $2.00 and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV deterioration, and marking must follow MIL-STD-129. Palletization adheres to DLA Packaging Requirements, and shipment must be traceable, excluding parcel post, using a RDD/ NMCS method. The supplier must provide and retain supply chain traceability documentation as outlined in DLA Directive C03 (August 2016), and government identification must be removed from non-accepted items. The contract strictly prohibits the use of ozone-depleting chemicals and intentional introduction of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specific instruments, weapon systems, or NAVSEA-approved chemical reagents. Any mercury-containing portable lamps or instruments must include a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements are referenced from the DLA Master List, and covered defense information provisions apply. The delivery is for a DLA Land Supply Chain procurement under the Department of Defense, with the point of contact being Kristina Derry, and the item falls under NAICS code 332618. The required delivery date is July 27, 2026, and the solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract is for 627 units of a quick release pin with NSN 5315-01-386-0206 under solicitation SPE4A6-26-T-09YY, issued as a total small business set-aside with a NAICS code of 332618. The delivery is due within 202 days after order, and responses were due by August 5, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based approach unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access to technical data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. Physical identification and marking of the item per RQ017 is required, and government identification must be removed from rejected supplies per RQ011. Additionally, the contractor must be certified at CMMC Level 2 by a C3PAO to meet cybersecurity requirements. All performance and compliance obligations are tied to the designated place of performance in New Cumberland, PA, with Shaundrea Granderson listed as the primary point of contact for the DLA.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOWThis contract pertains to the procurement of a hollow pin with NSN 5315-01-576-9303 and part number TDA 3101V178, issued under solicitation SPE7L4-26-U-1019 for DLA Direct, CONUS delivery. The quantity is 28 units at $28.00 per unit, with a fixed delivery requirement of 45 days from contract award and FOB origin shipping terms. No quantity variance is permitted, and inspection and acceptance occur at the destination. All items must conform to the DLA Master List of Technical and Quality Requirements, which supersede any other standards, including ASTM D3951. Packaging must strictly follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Sampling and inspection protocols require compliance with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with attribute verification levels set at VII, IV, and II for critical, major, and minor characteristics respectively. Government identification must be removed from rejected items, and physical identification of bare items follows RQ017. The contract is a total small business set-aside under NAICS code 332618, with Karryn Hoston as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332994
New
DIBBS
ARMOR, SUPPLEMENTAL,This contract pertains to the procurement of supplemental armor for small arms fragmentation protection, identified by NSN 2540-01-586-2711, with a total quantity of eight units delivered under a firm fixed price structure. Delivery is required within 108 days after award, with inspection and acceptance occurring at the destination, and FOB terms set at origin. The contract mandates strict adherence to DLA packaging requirements, including compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging if the item is non-hazardous, or Fed-Std-313 and TQ requirement IP025 if classified as hazardous, with all DLA Master List of Technical and Quality Requirements taking precedence over industry standards. Palletization must conform to RP001, and the item must be shipped to the designated DLA Distribution Red River receiving facility in Texarkana, Texas. The solicitation requires a CMMC Level 2 Self-Assessment for cybersecurity compliance and prohibits removal of government identification from non-accepted supplies. Price breaks are specified for incremental quantity ranges from one to fifteen units, with a zero percent variance allowed on the ordered quantity. The unit of issue is each, and the corresponding ANSI X12 unit must be verified through the official DLA link. The contract is issued under solicitation SPE7L3-26-Q-1226, with a response deadline of August 7, 2026, and a required delivery date of January 15, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract is governed by DLA procedures for transportation, packaging, and handling as outlined in specific procedural notes and federal standards.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
DIBBS
VALVE, RELAY, AIR PRESSUThis contract specifies the procurement of a valve, relay, air pressure, identified by NSN 2530-01-479-1014 and part numbers K161992OR, M81574, and 5013223 from approved suppliers including BENDIX COMMERCIAL VEHICLE SYSTEMS LLC, ROSENBAUER INTERNATIONAL AG, and DANA COMMERCIAL VEHICLE PRODUCTS. The requirement is for 76 units at a unit price of $76.00, totaling $5,776.00, with delivery due in 137 days from contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at destination, with packaging required to comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and this is a critical application item subject to removal of government identification from non-accepted supplies. The contract is a total small business set-aside under NAICS code 336390, with a response deadline of August 10, 2026, and the awarding agency is the Department of Defense under Land Supplier Operations Vehicle Support. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20, and the original required delivery date is January 10, 2027.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
PAN, DRAINThis contract pertains to the procurement of five units of a PAN, DRAIN item with NSN 4910-01-626-4341 under solicitation SPE7L3-26-T-136B, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. Delivery is required within 147 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied, and must be palletized according to DLA packaging guidelines. The contract explicitly prohibits the use of ozone-depleting chemicals and restricts mercury or mercury-containing compounds unless specifically exempted for approved functional applications such as certain batteries, lighting, or weapon systems, with additional containment requirements for portable devices. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Unit of issue is each (EA), with zero variance allowed in quantity, and shipment must follow DLAD procedural notes C19 and C20. The required ship date is January 5, 2027, with an original delivery deadline of January 18, 2027. All supplies must conform to DoD authorized unit of issue standards, and substitute materials must be pre-approved unless explicitly authorized by the specifications.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, SPECIALIZEDThe contract pertains to a Parts Kit, Specialized, identified by NSN 2590-01-495-6900, with a quantity of 113 KT and a purchase request number 7017603450 for a quantity of 287 units. Delivery is scheduled for 141 days after order date. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program status, verified training completion on handling controlled technical data, and formal approval from DLA authorities. The solicitation, numbered SPE7L3-26-T-136D, was posted on July 28, 2026, with responses due by August 10, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 333998. The contracting activity falls under the Department of Defense through the Land Supplier Operations Vehicle Support agency, with performance located in Jacksonville, Florida, and primary point of contact being Matthew Curry.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FELT, MECHANICAL, PREFORThe contract pertains to the procurement of 385 units of FELT, MECHANICAL, PREFORMED with NSN 5330-00-599-8279, specified to meet precise dimensional requirements of 5.500 inches in outer diameter, 4.734 inches in inner diameter, and 0.187 inches in thickness. The item is classified as a commercial item and must be manufactured in accordance with the current revision of a recognized part standard, either military or consensus non-governmental, with prior revisions still acceptable for historical hardware. All new units produced after the solicitation date must conform to the latest standard revision. The item must comply with MIL-STD-130N for identification marking, contain no asbestos as defined by FED-STD-313, and is subject to critical item source inspection. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with assigned verification levels or AQLs. The purchase is fully competitive under a military or federal specification. The solicitation number is SPE7L3-26-T-135S, issued on July 28, 2026, with a response deadline of August 7, 2026. Delivery is required within 48 days after award, and performance is designated for Robins AFB, GA, ZIP 31098-1887. The contracting agency is the Department of Defense under Land Supplier Opns Vehicle Spt, with Susan Diamond as the primary point of contact via email dla.flbb1prs@dla.mil and phone 6146925625. The NAICS code is 333998, and the acquisition falls under DLA packaging and technical quality requirements, incorporating standards from the DLA Master List of Technical and Quality Requirements. The procurement does not involve any set-aside designation and is subject to the DLA master list revision in effect on the solicitation issue date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPThis contract specifies the procurement of a nonmetallic special shaped seal, identified by NSN 5330-01-529-1025, with a unit of issue of one 10-foot roll (RO), totaling 16 rolls. The item is classified as a commercial item and a critical application product, requiring engineering source approval due to its restricted source status. It must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-DTL-117, Type II, Class C, Style 1, which mandates medium duty, waterproof, greaseproof, and opaque packaging for UV protection. The seal is subject to a non-extendable shelf life of 240 months and must contain no asbestos or class I ozone-depleting chemicals. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with special shelf-life marking code 32 applied. Delivery is due within 70 days FOB origin to the designated receiving warehouse in Tracy, California, with no variance permitted in quantity. The supply chain is restricted to approved vendors including Accurate Elastomer Products, Inc. and American Rubber Company, LLC, with specific part numbers assigned. Documentation for source approval, configuration changes, and hazardous material handling is required, and all deliveries must comply with DLA packaging and transportation procedures. The solicitation was issued on July 28, 2026, with a response deadline of August 10, 2026, and the original required delivery date is December 12, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, TURBINE ROTORThe contract is for the procurement of six SEAL, TURBINE ROTOR units identified by NSN 5330-00-163-5815 under solicitation SPE7L3-26-T-136F, with a delivery requirement of 161 days after award. The item is subject to strict compliance with DLA packaging standards and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, where any R or I designations must be adhered to as defined in that master list. The specification explicitly prohibits the use of asbestos as defined in FED-STD-313, and all non-accepted supplies must have government identification removed prior to return. The procurement falls under NAICS code 339991 and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with performance required at Cherry Point, North Carolina, zip 28533-5040. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the primary point of contact is Susan Diamond at DLA, reachable via phone or email for procurement inquiries.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThe contract pertains to the procurement of preformed packing components identified by NSN 5330-01-124-2449, with a quantity of 78 units, to be delivered FOB origin within 91 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque materials to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including oxygen cleaning requirements and special marking code ZZ for additional specifications. Palletization follows DLA packaging standards, and all shipments must include proper identification in accordance with MIL-STD-130N. The item is classified as a critical application and must be free of asbestos and any intentional addition of mercury or mercury compounds, with exceptions permitted only for specific functional uses such as batteries, instruments, or weapons systems, which must include secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with zero tolerance for quantity variance. The solicitation is governed by DLA’s master list of technical and quality requirements, referenced by R and I numbers, and the revision in effect on the solicitation issue date controls compliance. The contract is issued under solicitation SPE7L3-26-T-9544, with a response deadline of July 31, 2026, and a unit price of $78.00 per unit.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
SIGHT, REARThe contract pertains to the procurement of a rear sight component designated by NSN 1005-01-499-6868 and part number 98474, with an estimated quantity of 58 units to be delivered FOB origin within 139 days. The item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration may result in disqualification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which overrides other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items packed according to ASTM D3951 only where not superseded by DLA directives. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all government identification must be removed from non-accepted supplies. The product falls under Category I munitions and requires demilitarization per DODM 4160.28-Vol. 3, and covered defense information protocols apply. A Cybersecurity Maturity Model Certification Level 2 self-assessment is also required. The contract is issued under DLA Direct, CONUS coverage with zero tolerance for quantity variance, inspection and acceptance occurring at destination, and the solicitation number is SPE7L3-26-U-0654 with a response deadline of August 12, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
SUPPORT, STRUCTURALThis contract under solicitation number SPE7L3-26-T-9467 seeks one unit of a structural support item identified by NSN 2510-01-690-3838, with a delivery requirement of 20 days after award. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless amended. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Components subject to Qualified Products Lists or Qualified Manufacturers Lists must meet the qualification criteria outlined in procurement note H02. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-mandated training and received formal approval. The place of performance is Fort Riley, Kansas, with Lee Miller of the Department of Defense’s Land Supplier Operations Vehicle Support serving as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract pertains to the procurement of 82 O-rings with NSN 5331-01-165-1343 under solicitation number SPE7L3-26-Q-1227, with a delivery deadline of 120 days after award. The contract incorporates mandatory technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA Packaging Requirements RP001, and all supplies must be free of government identification if not accepted, as per RQ011. Contractors are required to retain supply chain traceability documentation in accordance with DLAD Procurement Note C03 from August 2016. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification provisions, and substitute chemicals must be approved unless explicitly authorized. Items must be completely free of asbestos, and any alternative materials require formal approval under Clause L30 and Provision 4 Conditions. The solicitation was posted on July 28, 2026, with responses due by August 8, 2026, and the point of contact is Rajesh Sehgal at the Department of Defense, Land Supplier Operations Vehicle Support.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332119
New
DIBBS
KNOBThis contract pertains to the procurement of one unit of a specific knob component identified by NSN 5355016272721 and part number U-CAR-016-A, with a complementary part number P9-096-40-M4N-15 from SOUTHCO INC. The delivery is required within ten days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must strictly comply with ASTM D3951, unless superseded by higher-priority technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and DLA Packaging Requirements RP001. The unit must be palletized according to the specified DLA standards, and the shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The consignee is the US Army at Fort Bliss, Texas, designated under the military freight code W4546F, with shipment reference RDD 555, project code TP 2, and mandatory marking including the TCN W4546F61700153. All supplies must have government identification removed if not accepted. The contract is issued under solicitation SPE7L3-26-T-137D with a required delivery date of June 25, 2026, and involves Covered Defense Information as defined by applicable regulations.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details