Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-T-09U4Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7L1-26-T-09U4 and issued by the Department of Defense Land Supply Chain, is for the procurement of 27 preformed O-rings under National Stock Number 5331-01-269-9195. The request for quotations was posted on September 10, 2026, with a response deadline of September 21, 2026. The contract falls under NAICS code 339991 and specifies a delivery timeline of 168 days after order. Performance is designated for New Cumberland, Pennsylvania. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Material restrictions are explicitly stated, prohibiting the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional mercury in specific instruments or weapon systems as defined by NAVSEA. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and requires submissions via the DIBBS system.

General Info

DoD procurement of 27 O-rings for New Cumberland, PA, due in 168 days.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-09U4 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
CHELSEA CUNNINGHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
PACKING,PREFORMED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5331-01-269-9195 Quantity: 27 EA Purchase Request: 7018272487QTY: 27 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-26-T-084A
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7M5-26-U-0065
Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-05J4
Solicitation SPE7L1-26-T-05J4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 242 O-rings (NSN 5331-01-338-7343). The requirement is under NAICS code 339991, with a need ship date of February 2, 2027, and an original required delivery date of March 1, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict quality and material standards, including a total prohibition of asbestos and Class I ozone-depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-P-4861. Contractors must maintain supply chain traceability documentation and adhere to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STRIP
Solicitation # SPE7LX-26-U-9818
Solicitation SPE7LX-26-U-9818 is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of nonmetallic strip seals, identified by NSN 5330-01-366-1066. The requirement is for an estimated quantity of 201 units and may result in a one-year indefinite delivery contract with a maximum value of 350,000.00 dollars. Delivery is required within 71 days after the order is received, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the items must be free of asbestos and intentionally added mercury. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges. Payment processing is managed through the Wide Area Workflow system. The procurement also incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-264X
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-361N
This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of 13,964 O-Rings, identified by NSN/Part Number 5331-00-250-0224. The procurement is managed under solicitation number SPE7M4-26-T-361N and is categorized as a federal solicitation. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. This contract is intended to fulfill specific logistical requirements for the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL ASSY, MAGNETIC
Solicitation # SPE7L3-26-T-217N
This contract solicitation, identified as SPE7L3-26-T-217N, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 65 units of Magnetic Shaft Seal Assemblies, part number 91082 from Magnetic Seal LLC. The item is classified under NSN 5330-01-357-6393 and is designated as a critical application item. The procurement is a total small business set-aside under NAICS code 339991, with a required delivery date of June 7, 2027, and a delivery timeframe of 115 days after order. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract explicitly prohibits the use of asbestos as defined in FED-STD-313. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-237G
Solicitation SPE7L3-26-T-237G is a request for quotations issued by DLA Land and Maritime for the procurement of 407 units of preformed packing, identified by NSN 5330-00-922-5947. The requirement is open for full and open competition, with quotes due by September 21, 2026. Delivery is expected by January 17, 2027, with a need ship date of September 10, 2026. The items must be free of asbestos and adhere to a non-extendable shelf life of 180 months. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special requirements include oxygen clean packaging (IP042) and hazardous materials shipping (IP025). Offerors must comply with the Buy American Act and the Berry Amendment, and those seeking the HUBZone price evaluation preference must be SBA-certified. Payment will be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and the prohibition of certain telecommunications equipment.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-168M
The contract solicitation SPE7L3-26-T-168M seeks six gaskets identified by NSN 5330-01-483-8638 and part number 3798661-1 from Sargent Aerospace & Defense, LLC, designated as a critical application item with a non-extendable shelf life of 180 months, requiring at least 85 percent of that shelf life to remain upon delivery. The gasket must be free of asbestos and compliant with technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Mercury and mercury-containing compounds are prohibited in direct contact with the item unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and possess a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, with preservation method 33, cleaning/drying method 1, and no preservation or cushioning materials. Marking must comply with MIL-STD-129, including special marking code 32 for shelf-life items, and hazardous materials must be labeled under the Hazard Communication Standard (29 CFR 1910.1200), with exceptions noted for items governed by other federal statutes. Delivery is required within 165 days of order receipt, FOB origin, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Electronic invoicing via WAWF is mandatory with both invoice and receiving report submissions unless an exception applies. The contractor must validate representations in SAM, including small business and socio-economic status, and certify compliance with prohibitions on covered defense telecommunications equipment, hexavalent chromium, and acquisition from Communist Chinese military companies. Cybersecurity obligations include adherence to NIST SP 800-171 requirements and safeguarding covered defense information with incident reporting procedures. Whistleblower rights, restriction on mandatory arbitration, and disclosure of information clauses are all incorporated without deviation, except for several FAR and DFARS clauses which include specific deviations effective February and March
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
Federal
Hydraulic Seal & Gasket Supply
Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details
NAICS: 339991
New
Federal
SEAL ASSEMBLY KIT
Solicitation # 7017777381
This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.
DLA Land And Maritime

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Nonmetallic Bumpers (NSN 5340-01-148-8935)
Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
FITTING, BREECH
Solicitation # SPE7L1-26-Q-1634
This firm fixed price solicitation, issued by DLA Land and Maritime, is for the procurement of 94 units of the Breech, Bomb Ejector Rack (NSN 1095-00-450-8483). The item is designated as a critical gun part and a defense article subject to International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring manufacturers to be registered with the Directorate of Defense Trade Controls. Delivery for the primary item is required 796 days after delivery order, with inspection and acceptance occurring at the origin via DCMA QAR at the manufacturer's facility. The award will be based on best value, considering price, proposed delivery, and past performance, with a government first article testing cost of 9,886.00 dollars factored into the evaluation. The contractor must provide two first article exhibits: one assembled with finish and one machined but unfinished and unassembled. Additional requirements include CMMC Level 2 certification, adherence to ASTM D3951 and MIL-STD-129 for packaging and marking, and compliance with the DLA Master List of Technical and Quality Requirements. All payment processing must be conducted through the Wide Area WorkFlow system.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-05Q3
This solicitation from the Department of Defense Land Supply Chain is for the procurement of two access covers, identified by NSN 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed and is subject to full and open competition. It incorporates specific technical and quality requirements from the DLA Master List, including strict packaging standards and the prohibition of Class I ozone depleting chemicals. The agreement includes rigorous security and compliance mandates, specifically requiring adherence to Covered Defense Information and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All responses must be submitted by September 11, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332613
New
DIBBS
CONTRACTOR FIRST ARTICLE TEST
Solicitation # SPE7L1-26-Q-1635
Solicitation SPE7L1-26-Q-1635 is a firm fixed price request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 88,000 leaf spring assemblies, identified by NSN 2510-00-741-1110. The government is seeking the best value based on an evaluation of price, past performance, and offered delivery. Quotations are due by September 18, 2026, with a required need ship date of March 9, 2027. The contract includes a Product Verification Test requirement, necessitating the shipment of selected samples accompanied by material certifications, manufacturing drawings, and a signed DD Form 1222 for government evaluation. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK071110. Inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Additionally, the contractor must comply with cybersecurity standards under NIST SP 800-171 and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance is primarily centered in Texarkana, Texas, and is managed by Adam Howell.
Spring Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336350
New
DIBBS
BODY, VALVE, BYPASS
Solicitation # SPE7L1-26-T-09K8
Solicitation SPE7L1-26-T-09K8 is a fixed-price request for quotations issued by the DLA Land and Maritime agency for the procurement of two bypass valve body assemblies (NSN 2520-00-475-1278) used on shop vans. The procurement requires the contractor to perform first article testing on three units, with a delivery window of 333 days for the primary items and 15 days for the first article test. Inspection and acceptance are both conducted at the origin. The government mandates that manufacturers maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls for technical data. Offerors must adhere to the Buy American Act and the Berry Amendment, with specific disclosures required for non-domestic materials. Packaging must comply with MIL-STD-129 and specific hazardous material standards such as IP025 and 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and a price evaluation preference for certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
KNOB
Solicitation # SPE7L1-26-T-960S
This solicitation is for the procurement of 333 knobs under NSN 5355-01-073-7408 for the Department of Defense Land Supply Chain. The contract requires delivery within 70 days after receipt of order and is open for full and open competition. The items must be manufactured according to current military or consensus non-government part standards and must be entirely free of asbestos. Quality and technical compliance are governed by DLA master requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. The procurement is subject to regulations regarding covered defense information and specific verification levels for critical, major, and minor attributes.
Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-U-0642
Solicitation SPE7L1-26-U-0642 is a request for quotations issued by DLA Land and Maritime for the procurement of fluid filter elements, specifically NSN 2940004321761, type A/S32M-13. These critical application items are used on M911 transporter commercial heavy equipment and truck tractors. The requirement is for an estimated quantity of 1,128 units, with a contract maximum value of 350,000.00 dollars. This is a Women-Owned Small Business set-aside and may result in a unilateral simplified indefinite-delivery contract with a fixed-price structure. The delivery period is specified as 62 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and RP001 DLA packaging requirements, while labeling must adhere to MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act and the Berry Amendment, and quotes are due by September 11, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
HOUSING, MECHANICAL
Solicitation # SPE7L1-26-T-05N4
This contract, identified as solicitation SPE7L1-26-T-05N4, is a total small business set-aside for the procurement of four 30 millimeter mechanical drive housings under NSN 1005-01-439-8941. The requirement is issued by the Department of Defense Land Supply Chain with a delivery timeline of 115 days after receipt of order. Performance is centered in Tracy, California, and the acquisition is governed by NAICS code 332994. The agreement includes stringent technical and quality mandates, including CMMC Level 2 self-assessment and third-party assessment requirements. It mandates strict adherence to demilitarization standards for small arms weapons and parts, as well as specific DLA packaging and configuration change management protocols. Furthermore, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle controlled technical data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-05Q4
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-05Q4, is for the procurement of two access covers, identified by NSN/Part Number 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed. It is subject to full and open competition and falls under NAICS code 332722. The agreement includes strict technical and quality requirements, specifically prohibiting the use of Class I ozone-depleting chemicals and mandating compliance with DLA packaging standards. Additionally, the contract enforces rigorous security and legal protocols, including CMMC Level 2 certification, the protection of covered defense information, and strict adherence to ITAR and EAR export controls. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336320
New
DIBBS
STARTER, ENGINE, ELECTRI
Solicitation # SPE7L1-26-T-05K9
Solicitation SPE7L1-26-T-05K9 is a fixed-price request for quotations issued by DLA Land and Maritime for one electrical engine starter, identified by NSN 2920014709867 and Cummins Power Generation part number 3604677RX. The procurement is categorized under NAICS code 336320 and requires delivery to Camp Ripley in Little Falls, Minnesota, with an original required delivery date of September 2, 2026, and a delivery lead time of 20 days. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Specific requirements include the use of a watervaporproof barrier bag, weather-resistant fiberboard die-cuts for cushioning, and a weather-resistant corrugated fiberboard unit container. All shipments must be traceable and comply with RP001 DLA packaging requirements. Payment processing must be handled electronically through the Wide Area Workflow system. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, cybersecurity reporting requirements under DFARS 252.204-7012, and prohibitions on the use of mercury compounds in packaging.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS