This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

O-RING

Closed

SPE7L1-26-T-747EFederal

Submission Closed07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339991

New

DIBBS

Supply of Critical Application Gaskets (NSN 5330-01-483-8638)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-084A

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7M5-26-U-0065

Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0778

Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-05J4

Solicitation SPE7L1-26-T-05J4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 242 O-rings (NSN 5331-01-338-7343). The requirement is under NAICS code 339991, with a need ship date of February 2, 2027, and an original required delivery date of March 1, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict quality and material standards, including a total prohibition of asbestos and Class I ozone-depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-P-4861. Contractors must maintain supply chain traceability documentation and adhere to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.

POSTED

DEADLINE

SEAL, NONMETALLIC STRIP

Solicitation # SPE7LX-26-U-9818

Solicitation SPE7LX-26-U-9818 is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of nonmetallic strip seals, identified by NSN 5330-01-366-1066. The requirement is for an estimated quantity of 201 units and may result in a one-year indefinite delivery contract with a maximum value of 350,000.00 dollars. Delivery is required within 71 days after the order is received, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the items must be free of asbestos and intentionally added mercury. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges. Payment processing is managed through the Wide Area Workflow system. The procurement also incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-264X

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-361N

This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of 13,964 O-Rings, identified by NSN/Part Number 5331-00-250-0224. The procurement is managed under solicitation number SPE7M4-26-T-361N and is categorized as a federal solicitation. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. This contract is intended to fulfill specific logistical requirements for the Department of Defense.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-217N

This contract solicitation, identified as SPE7L3-26-T-217N, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 65 units of Magnetic Shaft Seal Assemblies, part number 91082 from Magnetic Seal LLC. The item is classified under NSN 5330-01-357-6393 and is designated as a critical application item. The procurement is a total small business set-aside under NAICS code 339991, with a required delivery date of June 7, 2027, and a delivery timeframe of 115 days after order. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract explicitly prohibits the use of asbestos as defined in FED-STD-313. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-237G

Solicitation SPE7L3-26-T-237G is a request for quotations issued by DLA Land and Maritime for the procurement of 407 units of preformed packing, identified by NSN 5330-00-922-5947. The requirement is open for full and open competition, with quotes due by September 21, 2026. Delivery is expected by January 17, 2027, with a need ship date of September 10, 2026. The items must be free of asbestos and adhere to a non-extendable shelf life of 180 months. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special requirements include oxygen clean packaging (IP042) and hazardous materials shipping (IP025). Offerors must comply with the Buy American Act and the Berry Amendment, and those seeking the HUBZone price evaluation preference must be SBA-certified. Payment will be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and the prohibition of certain telecommunications equipment.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-168M

The contract solicitation SPE7L3-26-T-168M seeks six gaskets identified by NSN 5330-01-483-8638 and part number 3798661-1 from Sargent Aerospace & Defense, LLC, designated as a critical application item with a non-extendable shelf life of 180 months, requiring at least 85 percent of that shelf life to remain upon delivery. The gasket must be free of asbestos and compliant with technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Mercury and mercury-containing compounds are prohibited in direct contact with the item unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and possess a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, with preservation method 33, cleaning/drying method 1, and no preservation or cushioning materials. Marking must comply with MIL-STD-129, including special marking code 32 for shelf-life items, and hazardous materials must be labeled under the Hazard Communication Standard (29 CFR 1910.1200), with exceptions noted for items governed by other federal statutes. Delivery is required within 165 days of order receipt, FOB origin, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Electronic invoicing via WAWF is mandatory with both invoice and receiving report submissions unless an exception applies. The contractor must validate representations in SAM, including small business and socio-economic status, and certify compliance with prohibitions on covered defense telecommunications equipment, hexavalent chromium, and acquisition from Communist Chinese military companies. Cybersecurity obligations include adherence to NIST SP 800-171 requirements and safeguarding covered defense information with incident reporting procedures. Whistleblower rights, restriction on mandatory arbitration, and disclosure of information clauses are all incorporated without deviation, except for several FAR and DFARS clauses which include specific deviations effective February and March

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Component Supply (Gaskets & Seals)

NASA Johnson Space Center

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

The O-RING is a critical military component with precise dimensional requirements: an inside diameter between 10.824 and 10.884 inches and a thickness ranging from 0.269 to 0.281 inches, manufactured from nitrile rubber (NBR) per specified material standards. It must comply with rigorous technical and quality controls outlined in DLA’s master list of requirements and adhere to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances expected unless otherwise stated. The item is classified as a critical application item under MIL-PRF-2765E and has a non-extendable shelf life of 180 months, requiring compliance with MIL-STD-130N for identification marking. All hardware must conform to the latest revision of its part standard, with historical versions only acceptable if produced before the solicitation date. The O-RING must be marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including specific color and environmental resistance standards. Packaging must follow MIL-STD-2073-1E with Type II, Class C, Style 1 opaque, waterproof, greaseproof bags to protect against UV degradation, and palletization must meet DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in manufacturing, preservation, packaging, and marking with minimal exceptions for specific functional components. The item is subject to a firm fixed unit price of $13.00 per unit for a total of 13 units, with delivery required FOB origin within 169 days to the DLA Distribution facility in New Cumberland, Pennsylvania. All contractual obligations, including marking, packaging, and hazardous material restrictions, are binding and require contractor certification prior to award.

General Info

O-RING: NBR, precise dims, 180-month shelf life, MIL-STD compliant, $13/unit, 13 units, FOB origin, no mercury, DLA delivery.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-747E Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 20

Solicitation

Response DeadlineJul 23

Deadline has passed

Submission Closed

07/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressUSA

Contacts

Kelly Day

contact@example.gov

+1 (555) 000-0000

Full Description

O-RING
O-RING
ENGINEERING NOTES:
1. INSIDE DIAMETER RANGE: 10.824 INCHES MINIMUM TO 10.884 INCHES
MAXIMUM.
2. THICKNESS RANGE: 0.269 INCHES MINIMUM TO 0.281 INCHES MAXIMUM.
THE MATERIAL IS IN ACCORDANCE WITH RUBBER BUTADIENE-ACRYLONITRILE CLASS
NBR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE7L1-26-T-747E
SECTION B
SYNTHETIC RUBBER<(>,<)>
VOLUME CHANGE PERCENT 0-25 IS INTERPRETED TO BE
AN INCREASE OR SWELL AFTER OIL IMMERSION. A
NEGATIVE PERCENT OR DECREASE (SHRINKAGE) IN
VOLUME WOULD BE UNACCEPTABLE.
ITEM SHALL BE MARKED EVERY THREE (3) FEET WITH SPECIFICATION NUMBER AND
REVISION LETTER, TYPE AND CLASS. ALSO, QUARTER AND YEAR OF CURE OR
MANUFACTURE OF THE RUBBER COMPONENT IF REQUIRED. PERFORMANCE AND
LEGIBILITY SHALL BE IN ACCORDANCE WITH (I/A/W) PARAGRAPH 4.1 OF
MIL-STD-190. COLORS AND ENVIRONMENTAL RESISTANCE SHALL BE I/A/W TABLE I
OF MIL-STD-190. THIS REQUIREMENT IS IN ADDITION TO ANY MARKING
REQUIREMENTS CITED IN THIS CONTRACT. CONTRACTOR MUST CERTIFY THEIR
UNDERSTANDING OF BARE ITEM MARKINGS PRIOR TO AWARD.
QUALITY ASSURANCE DATA
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
IAW BASIC SPEC NR MIL-PRF-2765E NOT 2 REVISION NR E DTD 07/24/2024 PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-413C NOT 2 REVISION NR C DTD 03/17/2011 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017226425 0001 EA 13.000
NSN/MATERIAL:5331001717426
DELIVERY (IN DAYS):0169
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
SPE7L1-26-T-747E
SECTION B
PR: 7017226425 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/19/2026 Original Required Delivery Date:12/19/2026
SPE7L1-26-T-747E NSN/Part Number: 5331-00-171-7426 Quantity: 13 EA Purchase Request: 7017226425QTY: 13 Delivery: 169 days ADO