Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

O-RING

Active
SPE7L1-26-T-853EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of an O-ring with NSN 5331-01-536-3367 and part number 450611 manufactured by Steris Corporation, with a unit of issue of one each and a total quantity of two units. The delivery must be completed within five days of order placement, with delivery terms set at FOB origin, and no variance is permitted in quantity. Inspection and acceptance occur at the destination. Strict packaging requirements are mandated under MIL-STD-2073-1E and DLA packaging standards, including commercial-grade sealed unit containers and exterior shipping containers suitable for safe carrier transport. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging materials must be labeled with special instructions such as "Do Not Bend." Packaging containing wood must be heat-treated or kiln-dried to meet DOD requirements for wood packaging material. The O-ring must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, lighting, instruments, sensors, weapon systems, or medical reagents as defined by NAVSEA, with additional containment rules for portable mercury-containing devices. Shipment must be delivered to Chandler, Oklahoma, via traceable freight methods, excluding parcel post, and is designated as an RDD shipment with a required delivery date of July 17, 2026. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All medical procurement standards apply, and the contract is issued under solicitation SPE7L1-26-T-853E.

General Info

Two O-rings, NSN 5331-01-536-3367, delivered by July 17, 2026, to Chandler, OK, FOB origin, strict DOD packaging and mercury-free requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

800 THUNDERBIRD ROAD, CHANDLER, OK, 74834-0800, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7L1-26-T-853E

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING, FOR NSN 6530-01-378-0253
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STERIS CORPORATION,
UNIT OF ISSUE IS ONE 0-RING (EACH)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
STERIS CORPORATION 0NWN1 P/N 450611
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017539807 0001 EA 2.000
NSN/MATERIAL:5331015363367
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7L1-26-T-853E
SECTION B
PR: 7017539807 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:HB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/
OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
SPE7L1-26-T-853E
SECTION B
PR: 7017539807 PRLI: 0001 CONT’D
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
W904KX
W8SU OK ARNG FMS 2
800 THUNDERBIRD ROAD
CHANDLER OK 74834-0800
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W904KX
W8SU OK ARNG FMS 2
800 THUNDERBIRD ROAD
CHANDLER OK 74834-0800
US
MARKFOR
W904KX
W8SU OK ARNG FMS 2
800 THUNDERBIRD ROAD
CHANDLER OK 74834-0800
US
M/F: (TCN) W904KX61950063
RDD: N
PROJ: TP 1
SUPP ADD: W81L6Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE7L1-26-T-853E NSN/Part Number: 5331-01-536-3367 Quantity: 2 EA Purchase Request: 7017539807QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Supply of O-Rings (NSN 5331017272526)The contract is for the supply and delivery of O-rings identified by NSN 5331017272526 under CLIN 0001, with delivery terms set at FOB Origin, meaning responsibility and risk transfer to the buyer upon shipment from the supplier’s location. Inspection and formal acceptance of the goods will occur at the destination, ensuring compliance with quality and specification standards prior to final payment. The item is categorized under NAICS Code 339991, indicating manufacturing of other miscellaneous fabricated metal products, and the contracting entity is the Defense Logistics Agency within the Department of Defense. The contract was posted on July 20, 2026, and is structured as a subcontract under the DIBBS system with the identifier SPE7LX26D0066.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Precision Gasket Manufacturing and Delivery
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Commercial Seal Supply (NSN 5330011218251)
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Nonmetallic Special Shaped Seal Manufacturing & SupplyFour nonmetallic special shaped seals, Part No. 146T7264-13 with NSN 5330-01-727-5389, are to be manufactured and supplied for a critical application requiring strict compliance with FAA airworthiness standards and Defense Logistics Agency specifications. Full supply chain traceability is mandatory to ensure material integrity and regulatory adherence throughout production. The items must be delivered FOB origin to Tinker AFB, Oklahoma, with an estimated delivery window aligning with the submission deadline of July 31, 2026. This subcontract falls under NAICS code 339991 and is issued under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with no set-aside provisions designated. All manufacturing must meet the stringent quality and documentation requirements inherent to defense and aviation critical components.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Gasket Supply and Delivery (NSN 5330012931007)The contract requires the supply and delivery of six gaskets identified by NSN 5330012931007, which must comply with applicable military or commercial specifications, to be delivered to DLA Land and Maritime no later than July 27, 2026. The item falls under NAICS code 339991, indicating it is related to other miscellaneous manufacturing, and the contract is classified as a subcontract within the Department of Defense procurement structure. The order is managed by the Defense Logistics Agency, which oversees the logistics and supply chain needs of the U.S. military, ensuring that the gaskets meet required standards for operational use. The place of performance and point of contact details are not specified, and the solicitation number is not provided, suggesting this may be a direct award or follow-on action under an existing agreement. The contract was posted on July 20, 2026, and is accessible through the DIBBS system with a reference link for tracking and documentation purposes.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Gasket Manufacturing and SupplyThe contract involves the manufacture and delivery of nine units of a specific gasket identified by NSN 5330015316118, fully compliant with military specifications covering material composition, packaging standards, marking requirements, and a guaranteed 36-month shelf life. This is a subcontract under the Department of Defense, awarded by the Defense Logistics Agency, and is intended to support military supply chain needs through strict adherence to technical and quality benchmarks. All units must meet exacting performance and durability standards to ensure operational reliability in critical defense applications. The contract is posted under NAICS code 339991, indicating a classification within other miscellaneous manufacturing, and carries no set-aside provisions. The place of performance and point of contact details are not specified, but the contractual obligations are tied to the Defense Logistics Agency's procurement system, with the award record accessible via the provided DIBBS link. Delivery timelines and payment terms are governed by standard subcontract protocols under DOD procurement guidelines.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Precision Rubber Sealing Component Supply (O-Ring)The contract involves the supply of two O-rings identified by NSN 6530-01-378-0253, manufactured to meet strict military specifications ensuring form, fit, function, and full traceability to Steris Corporation or an approved alternate source. The components are critical sealing elements requiring adherence to high-quality standards and documented lineage to guarantee compliance with defense system requirements. The solicitation is structured as a subcontract under NAICS code 339991 for other miscellaneous manufacturing, with the place of performance located in Chandler, 74834-0800, and the overarching organization is the Department of Defense through the LAND SUPPLY CHAIN. The posting date is July 20, 2026, and responses must be submitted by July 31, 2026, with further details accessible via the official DIBBS link provided.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Conical Flared Tube Fitting Seals (NSN: 4730-00-436-1962)The contract involves the manufacture, packaging, and delivery of 1,423 conical flared tube fitting seals designated by NSN 4730-00-436-1962, all of which must fully comply with military specifications and meet stringent oxygen-clean standards to ensure safety and performance in high-risk environments. Full traceability is required for every component, documenting materials, processing steps, and quality control measures from production through final delivery. The work is being performed under a subcontract for the Defense Logistics Agency, a branch of the Department of Defense, and is classified under NAICS code 339991 for miscellaneous manufacturing. Although no specific delivery location or point of contact is provided, the seals are intended for military use and must adhere to exacting technical and procedural requirements to support critical defense systems. The solicitation was posted in July 2026, indicating this is a future-directed procurement.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Supply of Standardized Seal (NSN 5330011023254)The contract mandates the procurement and delivery of one standardized seal identified by NSN 5330011023254 and part number 8J1688, ensuring full compliance with federal supply standards. The item must be shipped using a traceable method to Fort Leonard Wood, Missouri, with delivery required no later than July 27, 2026, under FOB destination terms, meaning title and risk of loss transfer to the government upon arrival at the destination. The procurement is executed under a subcontract tied to the Defense Logistics Agency with the NAICS code 339991, indicating involvement in other miscellaneous manufacturing. The contract was posted on July 20, 2026, and is part of a broader Department of Defense supply chain initiative aimed at maintaining operational readiness through precisely specified components.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Supply of Nonmetallic Seals with Military Compliance and IUID MarkingThe contract entails the supply of 19 nonmetallic seals that must fully comply with MIL-DTL-117 and MIL-STD-130 military standards, ensuring they meet rigorous performance and identification requirements. Each seal must be individually marked with an IUID tag for unique identification and full traceability throughout its lifecycle, as mandated by Department of Defense protocols. The packaging must adhere to specified military guidelines to protect the integrity of the seals during transit and storage. Delivery is scheduled for Tinker Air Force Base, where the seals will be integrated into critical defense systems. The work is classified as a subcontract under NAICS code 339991, and the contracting authority is the Defense Logistics Agency under the Department of Defense. The solicitation was posted in July 2026, and all deliverables are subject to strict military compliance and documentation standards.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Nonmetallic Seal Manufacturing for Aerospace ApplicationsThe contract requires the manufacture of 3,000 nonmetallic seals identified by NSN 5330-01-697-5551 and part number L3223771-074, strictly adhering to Boeing Drawing 43999 LP261-0011 and ASME Y14.5 dimensional tolerances. These seals are designated for critical aerospace applications and must be produced without any bolt or fastener holes to ensure structural integrity and performance under extreme conditions. The work is being conducted under a subcontract arrangement through the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 339991 indicating specialized manufacturing services. The solicitation was posted on July 20, 2026, and the contract award is identified by the number SPE7L326P4996, though no specific place of performance or point of contact is provided in the details.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting & Socioeconomic Compliance SupportThe contract seeks support for small business representation, certification under programs such as WOSB, SDVOSB, and HUBZone, and the structuring of joint ventures to ensure full compliance with federal socioeconomic regulations. Providers will assist government contractors and subcontractors in navigating complex certification requirements, maintaining eligibility, and adhering to reporting and documentation standards necessary for participation in set-aside programs. The scope includes ongoing guidance on regulatory changes, audit readiness, and strategic alignment with procurement goals tied to small business utilization. Performance is required at Pineville, Louisiana, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 541611 for management consulting services. The contracting organization is the Department of Defense through the Land Supply Chain office. While the exact award mechanism or funding details are not specified, the nature of the work implies an ongoing advisory or consulting engagement rather than a traditional deliverable-based contract. All proposers must demonstrate proven experience in federal small business certification processes and a deep understanding of Defense Acquisition Regulations and socioeconomic compliance frameworks.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with cyber incident reporting requirements. This subcontract is issued under the Department of Defense’s Land Supply Chain and is focused on securing sensitive data within the defense supply chain by enforcing standardized cybersecurity practices outlined in the NIST framework. The place of performance is designated as Pineville, Louisiana, with a zip code of 71360-3737, indicating the geographic scope of the work. Proposals must be submitted by July 31, 2026, and the solicitation is categorized under NAICS code 541512, which corresponds to Computer Systems Design and Related Services. The work involves both initial deployment and continuous monitoring of security measures to meet federal requirements for protecting controlled unclassified information and promptly reporting any cyber incidents.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Mechanical Housing Unit (NSN: 3040-01-519-2481)The contract requires the manufacture or sourcing, packaging, labeling, and delivery of a mechanical housing unit identified by NSN 3040-01-519-2481, with full compliance to DLA specifications, ASTM D3951 for packaging of military materiel, and MIL-STD-129 for military labeling requirements. All work must be performed to meet stringent defense standards for durability, identification, and logistics handling, ensuring seamless integration into military supply chains. Packaging and labeling must include appropriate barcodes, part numbers, and handling instructions as mandated by federal military guidelines. The solicitation is structured as a subcontract under the NAICS code 333613, which corresponds to other engine equipment manufacturing, and falls under the Department of Defense’s Land Supply Chain organization. The place of performance is designated as Pineville, Louisiana, with a ZIP code of 71360-3737. Proposals are due by July 31, 2026, following a posting date of July 20, 2026. While no set-aside type is specified, bidders must be prepared to demonstrate capability in fulfilling defense-grade production and logistical demands with precise adherence to technical and procedural requirements.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Technical Data Packaging and Marking ComplianceThe contract requires technical and quality assurance support to ensure all items meet military packaging and marking standards, specifically MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, to guarantee proper identification, handling, and logistics tracking throughout the supply chain. This subcontract is focused on compliance with Department of Defense requirements and will be executed at the place of performance in Greensboro, North Carolina, with a zip code of 27409. The work involves verifying that all materials are labeled, packaged, and documented in full accordance with the specified military standards to maintain operational readiness and supply chain integrity. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposers to submit their qualifications. The NAICS code 541380 classifies this as a professional, scientific, and technical services contract, emphasizing technical expertise over general labor or manufacturing. The agency responsible is the Department of Defense under the Land Supply Chain organization, and the contract is specifically designated as a subcontract, meaning it supports a larger procurement effort. All work must be completed with precision and traceability to meet the stringent demands of military logistics and inventory systems.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and Compliance SupportThis contract requires full compliance with federal and defense regulations pertaining to the safe handling, labeling, and documentation of hazardous materials, with specific emphasis on ocean transport of hazardous cargo. The contractor must implement and maintain rigorous protocols to ensure adherence to all applicable laws and standards governing hazardous material operations, including proper identification, packaging, marking, placarding, and recordkeeping throughout the supply chain. All activities must align with Department of Defense requirements and international maritime safety guidelines to mitigate risk and ensure operational continuity. The work is performed as a subcontract under the agency name LAND SUPPLY CHAIN, part of the Department of Defense, with the place of performance located in Greensboro, North Carolina, 27409. The contract falls under NAICS code 541690, indicating it involves other scientific and technical consulting services, suggesting a focus on advisory, compliance, and procedural support rather than direct logistics or transportation. Responses are due by July 31, 2026, and the opportunity was posted on July 20, 2026, through the DLA DIBBS platform. No set-aside provisions are specified, and the contract is open to eligible subcontractors seeking to support defense-related hazardous materials compliance efforts.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Helical Compression Spring Manufacturing and SupplyThe contract calls for the manufacture and supply of eight helical compression springs designated by NSN 5360-01-605-8091 and part number 160-15-12, with full compliance to Department of Defense technical standards governing material composition, dimensional tolerances, load characteristics, and surface finish. All units must adhere strictly to packaging and marking requirements as defined by DLA, including proper labeling, traceability codes, and handling instructions, while also complying with all applicable hazardous material restrictions to ensure safe transport and storage. The springs are intended for use within military logistics systems and must be delivered in a configuration ready for immediate integration without additional modification. The solicitation is classified as a subcontract under NAICS code 332722, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The place of performance is specified as Greensboro, North Carolina, with a zip code of 27409, indicating where final delivery and acceptance will occur. The contracting authority is the Land Supply Chain under the Department of Defense, though no specific point of contact or set-aside classification is provided. Bidders must ensure full alignment with DLA’s contractual and technical expectations, including documentation, quality assurance protocols, and adherence to federal supply chain security measures.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Kitting ServicesThe contract requires comprehensive packaging, preservation, unitization, and labeling services for mechanical parts kits in full compliance with Department of Defense and Defense Logistics Agency standards. All work must meet military specifications for durability, environmental protection, and traceability to ensure readiness and operational effectiveness across the supply chain. Services must be performed in accordance with established protocols for material handling, corrosion prevention, and secure packaging to safeguard components during storage and transit. This subcontract is categorized under NAICS code 493190 and is issued by the Land Supply Chain office within the Department of Defense. The solicitation was posted on July 20, 2026, with proposals due by July 31, 2026. Performance locations and specific delivery points are not detailed in the provided data, but compliance with DLA requirements for documentation, labeling, and unitization is mandatory. Interested parties must submit responses through the designated DIBBS platform prior to the deadline.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Hydraulic Front Suspension Cylinder Kit SupplyThe contract calls for the supply of ten hydraulic front suspension cylinder kits, specifically designed to meet rigorous military standards in functionality and durability. All units must be packaged, marked, and documented in full compliance with federal military packaging and labeling regulations, including accurate hazardous material reporting to ensure safe handling and transportation throughout the supply chain. The work is categorized under NAICS code 332994, indicating specialized aerospace and defense component manufacturing, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Proposals must be submitted no later than July 31, 2026, with the solicitation posted on July 20, 2026, providing a ten-day window for response. Performance is expected to align with Defense Logistics Agency protocols, and all deliverables must adhere to the technical and administrative requirements outlined in the DIBBS RFQ system under reference number SPE7L126T853R.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Linear Actuator Parts Kit SupplyThe contract awards the supply of ten linear actuator parts kits, identified by NSN 3040-01-167-2873 and part number 666-2331-07, under a subcontract arrangement with the Department of Defense through LAND SUPPLY CHAIN. All units must be packaged and labeled in strict compliance with military standards to ensure handling, storage, and operational readiness. Delivery is specified as FOB origin, meaning the supplier assumes responsibility until the goods are loaded at the point of origin, with final destination being Cairo, Egypt. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the NAICS code 333613 confirms the industrial classification for industrial machinery manufacturing. The contract is not set aside for any specific small business category and requires full adherence to defense logistics protocols without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Commercial Item Logistics & FOB Destination DeliveryThe contract requires the transportation and delivery of TCOM-200-PUR-DB cable to Tobyhanna, PA, with a strict five-day deadline from the date of order placement, and delivery must be made under FOB destination terms, meaning the seller assumes all risks and costs until the goods arrive at the specified location. If the shipment involves sea transport, compliance with U.S.-flag vessel requirements is a potential condition that must be met, ensuring adherence to federal maritime regulations. The contract is classified as a subcontract under the NAICS code 484220, which pertains to truck transportation and related logistics services, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is clearly identified as Tobyhanna, PA, with a zip code of 18466-5050, and the solicitation was posted on July 20, 2026, with responses due by July 31, 2026. All logistics must be executed to meet the government's delivery timeline and regulatory compliance standards without delay or deviation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details