Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7L1-26-Q-1617Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 1,540 O-rings under NSN 5331-01-601-4559. The contract is open for full and open competition with a delivery requirement of 124 days after the order is placed. The place of performance is located in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 336310. The agreement incorporates several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. A critical material constraint is that all supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific contract clauses. This solicitation was posted on September 9, 2026, with a response deadline of September 18, 2026.

General Info

DoD procurement of 1,540 asbestos-free O-rings delivered to New Cumberland, Pennsylvania.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-Q-1617.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
GEORGE MITCHELL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
FULL AND OPEN COMPETITION APPLY
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-601-4559 Quantity: 1,540 EA Purchase Request: 7017780959QTY: 1540 Delivery: 124 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
VALVE, PRESSURE ACTU
Solicitation # SPE7MC-26-T-253F
This contract is for the procurement of 20 pressure actuated drain valves, identified by NSN 4820011604977. These valves are designated as critical application items for bleed air systems, featuring an open state at 4 PSIG, a close state at 10 PSIG, a maximum operating pressure of 165 PSIG, and a maximum operating temperature of 1000 degrees Fahrenheit. Approved manufacturers and part numbers include The Boeing Company, Northrop Grumman Systems Corporation, and Aerocontrolex Group. The agreement specifies a delivery timeframe of 74 days with a required delivery date of May 9, 2026, shipping FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements and specifies that inspection and acceptance will occur at the destination.
SAN DIEGO

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-254Z
This solicitation, issued by the Defense Logistics Agency under solicitation number SPE7MC-26-T-254Z, is for the procurement of one ball valve, identified by NSN 4820-01-641-6424. The contract requires delivery within 200 days after receipt of order and falls under NAICS code 336310. The agreement incorporates strict technical and quality standards, including DLA packaging requirements and higher level quality controls. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning prior authorization from the Department of State or Commerce is required for export. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
CAP VALVE CYLINDER
Solicitation # SPE7MC-26-T-238R
This contract is for the procurement of two valve cylinder caps, identified by NSN 4820011084271 and part number T192019 from Curtiss-Wright Electro-Mechanical Corp. The order is designated as a critical application item with a delivery requirement of 118 days after receipt of order, targeting a required delivery date of March 30, 2027. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for approval unless already authorized by specification requirements.
DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08M3
This contract is for the procurement of three O-rings under solicitation number SPE7L1-26-T-08M3 for the Department of Defense Land Supply Chain. The items are identified by NSN 5331017061611 and are associated with part numbers from Berg Manufacturing, Inc. and Danfoss Power Solutions II, LLC. Delivery is required within five days of order, with the final destination and inspection point set as the Sierra Army Depot in Herlong, California. The contract mandates strict adherence to DLA packaging and quality requirements, specifically citing the need for medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to protect the items from ultraviolet ray deterioration. Shipping must be conducted via the fastest traceable means, excluding parcel post, and must comply with MIL-STD-129 marking and RP001 packaging standards. The original required delivery date is listed as September 8, 2026.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08T4
This contract is for the procurement of 275 O-rings, identified by NSN 5331-01-710-7201 and Mag Aerospace Industries part number 1760794. The items are designated as critical application components with a non-extendable shelf life of 18 months. Delivery is required within 32 days, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to technical and quality requirements, including FAA airworthiness approval and supply chain traceability documentation. Due to the risk of deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the shipment must follow DLA packaging requirements for procurement.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L4-26-U-1138
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1138 for the procurement of two radiator fan shrouds. The items are identified by NSN/Part Number 2930-01-576-8568 and are associated with purchase request 1000240622. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING AND
Solicitation # SPE7L1-26-T-08M1
This contract, identified as SPE7L1-26-T-08M1, is a federal solicitation issued by the Department of Defense Land Supply Chain for the procurement of one fuel metering and distributing pump. The required item is identified by NSN 2910-01-669-0954 and Perkins Engines Inc part number 2644P501. Delivery is required within 20 days, with a required delivery date of September 8, 2026, and the shipping destination is Joint Base Pearl Harbor-Hickam in Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Terms specify that the delivery is FOB Origin, while both inspection and acceptance will occur at the destination. The contract also requires the removal of government identification from any non-accepted supplies and follows specific palletization requirements outlined in RP001.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
FUEL CONTROL, STARTI
Solicitation # SPE7L3-26-T-230F
This contract is a solicitation for the procurement of two fuel control starting units, identified by NSN 2910-01-731-3800 and part number A3318 from Electronic Concepts and Engineering Inc. The order is issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-230F. Delivery is required within 20 days after receipt of order, with a final required delivery date of August 20, 2026. The items are to be shipped FOB Origin to Assault Craft Unit 4 in Virginia Beach, Virginia, using the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. There is a strict prohibition on the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements such as batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA packaging requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
COOLLY, FUEL
Solicitation # SPE7L1-26-U-0708
This procurement contract, identified as solicitation SPE7L1-26-U-0708, is issued by the Department of Defense Land Supply Chain for the acquisition of fuel-related components. The contract specifies the procurement of eight units of NSN 2910-12-380-6134, identified as part number 5562000975 from MTU Friedrichshafen GmbH. The delivery requirement is set for 74 days after order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically citing ASTM D3951 and MIL-STD-129 for marking and labeling. All technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. The contract is managed by Jennifer Payne and falls under NAICS code 336310.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING AND
Solicitation # SPE7L4-26-U-1231
This contract, identified as SPE7L4-26-U-1231, is a total small business set-aside solicitation issued by the Department of Defense through the LSO Combat Vehicles and Armament. The procurement is for 20 units of a fuel metering and distributing pump, specifically Textron Ground Support Equipment Inc. part number 20-10-0107 and NSN 2910-01-564-4377. The delivery is required within 74 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for marking and labeling and ASTM D3951 for packaging, though DLA Master List technical and quality requirements take precedence. The contract also specifies the removal of government identification from any non-accepted supplies. This procurement falls under NAICS code 336310 and is managed by the DLA Direct coverage for CONUS.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L3-26-T-229W
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one O-ring under part number 5331-01-718-7558. The contract requires delivery within five days after receipt of order and mandates strict adherence to technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. All supplied items must be completely free of asbestos. Suppliers must comply with the current revision of the source control drawing. Those not listed as approved sources are required to obtain source approval from the original equipment manufacturer and submit the relevant technical data package or certification to the DLA with their offer. The solicitation is open for responses until September 21, 2026, and falls under NAICS code 336310.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L1-26-T-08F8
This contract is for the procurement of one radiator fan shroud, identified by NSN 2930015819901 and Oshkosh Defense part number 3813240. The order is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-08F8. Delivery is required within five days after order, with a required delivery date of September 8, 2026. The item is to be delivered FOB Origin to the III Corps Tactical Area at Fort Hood, Texas. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and RQ017 for physical item marking in accordance with MIL-STD-130N. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement standards. Inspection and acceptance will take place at the destination. Shipment must be handled via the fastest traceable means, specifically excluding parcel post.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08E3
This solicitation from the Department of Defense Land Supply Chain is for the procurement of one preformed O-ring, identified by NSN 5331-01-322-2839 and part number 826502-247 from Sullair Corp. The item must be free of asbestos as defined in FED-STD-313 and must adhere to specific DLA packaging and quality requirements. The contract requires delivery within 20 days after the order is placed. It is categorized under NAICS code 339991, with the place of performance located at FPO 96672. The response deadline for this solicitation is September 21, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MENDING
Solicitation # SPE7L1-26-T-08N9
This contract is for the procurement of one mending plate, identified by NSN 5340017255661 and part number 4730-010-573 from Advanced Technology and Research. The item is designated as a critical application item and must be delivered FOB Origin to Port Hueneme, California, within 20 days. The required delivery date is set for September 3, 2026, and the contract specifies a zero percent quantity variance. The supplier must adhere to DLA master lists for technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. A strict prohibition is placed on the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and RP001, with specific instructions to use the fastest traceable means for shipping rather than parcel post. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-08S4
This solicitation, issued by the Department of Defense Land Supply Chain for a cushioning pad under NSN 5340-01-707-6503, requires the delivery of one unit within 10 days after the order is received. The contract is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating packaging standards and the removal of government identification from non-accepted supplies. A strict prohibition is placed on the use of Class I ozone-depleting chemicals, requiring approved substitutes if necessary. The agreement includes stringent security and compliance mandates, including the protection of covered defense information and adherence to ITAR and EAR export controls. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training. Quality assurance is managed through authorized certificate of conformance procedures unless otherwise specified by a quality assurance letter of instruction.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
GOVERNOR, DIESEL ENGINE
Solicitation # SPE7L1-26-T-03T8
Solicitation SPE7L1-26-T-03T8 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of two diesel engine governors, identified by NSN 2990010538648 and Woodward part number 8561-738. This procurement is a total small business set-aside under NAICS code 336390. The required delivery date and need ship date are both set for June 9, 2027, with the items to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin for offers, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and follow DLA packaging requirements for procurement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation may be eligible for automated award, and all quotes must be submitted via the DLA Internet Bid Board System.
Other Motor Vehicle Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-02U8
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of three detent plungers identified by NSN/Part Number 5340-01-487-6900. The request is tracked under purchase request 7016886565 and falls under NAICS code 339994. The solicitation, numbered SPE7L1-26-T-02U8, was posted on August 25, 2026, with a response deadline of September 8, 2026. Interested parties should direct inquiries to the buyer via the provided DIBBS email contact or the official solicitation portal.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-08G4
This contract is for the procurement of 144 vehicular component brackets, identified by NSN 25900157078561 and Oshkosh Defense part number 3767179. The order is managed under solicitation SPE7L1-26-T-08G4 with a required delivery date of September 3, 2026, and a delivery timeframe of 10 days after order. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The supplies are to be delivered to the US Army APS 2 in Powidz, Poland. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-08B4
This solicitation is for the procurement of 202 O-rings under NSN 5331-00-835-8974 for the Department of Defense Land Supply Chain. The contract is open for full and open competition with a delivery requirement of 94 days after the order is placed. Performance will take place in Jacksonville, Florida, and the solicitation is categorized under NAICS code 339991. The items must be manufactured according to current military or consensus non-government part standards, though hardware produced under previous revisions remains acceptable. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, with a focus on zero-based sampling plans. Additionally, the contract incorporates DLA master lists for technical and quality requirements, specifically addressing packaging and the removal of government identification from non-accepted supplies.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
TREAD, METALLIC, NONSKID
Solicitation # SPE7L1-26-T-08H4
This contract is for the procurement of three metallic nonskid treads, identified by NSN 2540016825431 and Oshkosh Defense part number 4425732. The order is managed under solicitation SPE7L1-26-T-08H4 with a required delivery date of September 8, 2026, and a delivery window of five days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The supplies are to be delivered to the US Army SSA SUSBDE APS 405th AFSB in Zutendaal, Belgium. Strict adherence to DLA packaging and marking requirements is mandatory, specifically following MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract also incorporates technical and quality requirements via the DLA Master List and specifies the removal of government identification from any non-accepted supplies.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
BRUSH, CLEANING, ARTILLE
Solicitation # SPE7L1-26-T-04H9
Solicitation SPE7L1-26-T-04H9 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of 31 units of 120mm artillery bore cleaning brushes, identified by NSN 1015-01-583-3785. The contract requires delivery to DLA Distribution Puget Sound in Bremerton, Washington, with a delivery window of 160 days and a need ship date of February 16, 2027. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard. The procurement includes stringent technical and security requirements, including compliance with the Buy American Act and Berry Amendment. Contractors must adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Packaging Instruction 11581871. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and comply with ITAR or EAR export controls. Additionally, the solicitation incorporates Cybersecurity Maturity Model Certification CMMC Level 2 requirements and mandates the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. This acquisition follows the Women-Owned Small Business Program set-aside cascade instructions.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-02E7
Solicitation SPE7L1-26-T-02E7 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one helical compression spring, identified as NSN 5360-00-822-3802 and part number TAVCO, INC. 99221 P/N 60002136. This item is designated as a critical application item. The solicitation was posted on August 25, 2026, with a response deadline of September 8, 2026. The procurement falls under NAICS code 332613 and is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. The required delivery date is August 21, 2026, with shipping terms set as FOB Destination Other. Deliveries are to be made to the Fleet Readiness Center Southeast in Jacksonville, Florida. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must adhere to MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract includes several regulatory requirements, including compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. It also incorporates specific FAR clauses regarding combating trafficking in persons, employment eligibility verification, and sustainable products. Offerors must certify that they will not provide covered telecommunications equipment or services and must adhere to NIST SP 800-171 DOD assessment requirements.
Spring Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-T-08B0
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-08B0, is for the procurement of one webbing strap, identified by NSN 5340-01-697-7853. The contract requires delivery within five days after the order is placed. It is open for full and open competition under NAICS code 332510, with a response deadline of September 21, 2026. The agreement includes strict technical and quality requirements, specifically prohibiting the use of Class I ozone-depleting chemicals and mandating compliance with DLA packaging standards. It also incorporates high-level security and regulatory mandates, including CMMC Level 2 certification, Covered Defense Information protocols, and strict export controls under ITAR and EAR. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-controlled training.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-02U0
The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7L1-26-T-02U0 for the procurement of 80 O-rings under part number 5331-01-313-4959. This federal requirement is tracked under purchase request 7017779099. The solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission instructions through the DIBBS portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS