O-RING

The contract specifies the procurement of an O-ring identified by NSN 5331-00-684-5098, with a quantity of 272 units, under solicitation SPE7M4-26-T-263B, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with current revision standards established by either a military part standard or a consensus non-government standards organization; hardware manufactured to prior current revisions remains acceptable, but all units produced from the solicitation date onward must adhere strictly to the latest version of the applicable standard. Packaging and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, where critical, major, and minor attributes are verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. The O-ring must be marked in accordance with MIL-STD-130N for U.S. military property identification. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable devices containing mercury must include shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. The delivery schedule allows for 140 days after order placement, with the solicitation open until July 27, 2026, and performance located at Tinker AFB, Oklahoma.