This Sources Sought opportunity from Department Of Defense was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

OEM "Aircraft Appliances & Equipment" - Feed Tank Assembly Part(s)

Closed

1301341783Federal

Submission Closed06/01/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998

New

DIBBS

PARTS KIT, FLUID PRESSU

Solicitation # SPE7M1-26-U-5566

Solicitation SPE7M1-26-U-5566 is a total small business set-aside for an indefinite delivery contract with a one year period, issued by the Defense Logistics Agency for the procurement of fluid pressure filter parts kits. The requirement specifies General Motors LLC 7X677 part number 24210956, with an estimated annual quantity of 3,515 units and a guaranteed contract minimum of 527 units. The contract has a maximum value of 350,000 dollars and requires a delivery period of 81 days. The government reserves the right to make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Technical compliance requires adherence to DLA master lists and specific packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless authorized. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act. Payment and invoicing must be processed through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vibra-Coring System Supplier

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10Z2

This solicitation, identified as SPE7L1-26-T-10Z2, is issued by the Department of Defense Land Supply Chain for the procurement of 81 fluid filters under NSN 2940-00-080-7522. The contract is designated as a total small business set-aside under NAICS code 333998, with a required delivery timeframe of 168 days after order. Performance is centered in New Cumberland, Pennsylvania. The agreement incorporates strict technical and quality standards, including ISO 9001 tailored requirements and specific DLA packaging and inspection protocols. It mandates compliance with Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML) for components. Additionally, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-controlled technical data training to access restricted information.

POSTED

DEADLINE

CGC RESOLUTE BRAND NAME DUPLEX STRAINERS

Solicitation # 52000QR260028133

The United States Coast Guard Surface Force Logistics Center is soliciting quotes for the procurement of two new 3-inch Bronze Duplex Flanged Sea Strainers, model 72-44F-SS1, for the CGC RESOLUTE. The required equipment must be 100 percent new, featuring Monel baskets with 1/32 inch perforations and 316 marine-grade stainless steel hardware, with a strict prohibition on cadmium plating. This is a total small business set-aside under NAICS 333998, and the resulting purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures. The items must be manufactured in the United States in compliance with the Buy American Act, and delivery is required FOB destination to Coast Guard Base Portsmouth, Virginia, no later than November 16, 2026. To be considered technically acceptable, offerors must provide a detailed cost breakdown, a formal Buy American Act compliance statement, and technical specification sheets. Additionally, the final delivery must include material test reports or certificates of conformance for the Monel and stainless steel components, as well as certified factory pressure test reports. Quotes are due by September 18, 2026, at 10:00 A.M. Eastern Standard Time.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

43--FILTER ELEMENT,FLUID

Solicitation # SPE7M4-26-T-404Y

This solicitation, numbered SPE7M4-26-T-404Y, is issued by the Department of Defense Fluid Handling Division for the procurement of ten fluid filter elements, identified by NSN 4330-01-052-0080. The items are critical application components corresponding to Tate and Andale drawing G12379 Rev 2 and part number G12379-77REV3 for the Model 103BF duplex lube oil filtering assembly. This is a Women-Owned Small Business set-aside under NAICS code 333998, with a required delivery date of June 19, 2027, and a delivery timeframe of 283 days after order. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. It includes specific technical requirements regarding the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and the handling of covered defense information are required. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

FLUID HANDLING DIVISION

POSTED

DEADLINE

43--FILTER ELEMENT,FLUID

Solicitation # SPE7M1-26-T-348W

Solicitation SPE7M1-26-T-348W is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain on September 11, 2026, for the procurement of 345 fluid filter elements, identified by NSN 4330124176825. The procurement falls under NAICS code 333998 and requires quotes to be submitted electronically via the DIBBS system by the deadline of September 21, 2026. Delivery is expected within 133 days, with an original required delivery date of February 16, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under the First Destination Transportation program and specifies FOB Origin shipping terms. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Payment and invoicing must be processed through the Wide Area WorkFlow system. Approved sources for this procurement include 974H3 5802033907 and 974H3 582033907.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

43--SEPARATOR,WATER,LIQUID

Solicitation # SPE7M1-26-T-348Y

Solicitation SPE7M1-26-T-348Y is a request for quotations issued by DLA Land and Maritime for the procurement of 943 units of liquid fuel water separators, identified by NSN 4330014246740 and part number 200257 from M. E. Industries, Inc. This item is designated as a critical application item. The procurement falls under NAICS code 333998 and requires electronic submission of quotes via the DIBBS system by September 21, 2026. Delivery is required within 317 days, with a need ship date of August 5, 2027, and a final required delivery date of August 13, 2027. Shipping is established as FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS requirements for safeguarding covered defense information and the prohibition of hexavalent chromium. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment processing are to be handled electronically through Wide Area WorkFlow. Offerors are prohibited from using additive manufacturing processes unless specifically authorized. The procurement is managed by the Maritime Supply Chain office in Columbus, Ohio, with Michael Reese serving as the primary buyer.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Portable Centrifuge Lube Oil Purifiers

Solicitation # W3555-268893

The Department of National Defence is soliciting offers for the procurement of two new portable centrifuge lube oil purifiers for Fleet Maintenance Facility Cape Breton in Victoria, BC. These units are specifically required to remove water and particulate from emulsified and salt water contaminated R&O 77 steam turbine lubricating oil. The firm requirement must be delivered Duty Paid to CFB Esquimalt by June 17, 2027. Additionally, Canada retains irrevocable options to purchase up to two additional units for FMF Cape Breton and two for FMF Cape Scott in Halifax within 12 months of the contract award. The overall contract period extends from the date of award until December 22, 2027. Award selection is based on the lowest evaluated price among technically compliant offers. Mandatory technical criteria include compliance with the Canadian Electrical Code Part 1, the inclusion of emergency stops, and English labeling for all hazard areas. All equipment must be new and adhere to strict environmentally preferable packaging standards, requiring materials to be reusable, returnable, or recyclable. The contractor must also certify that the goods are not produced using forced labour. Payment for undisputed invoices will be made within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

Solicitation # TAMUS-ITB-26-0544

The Texas A&M University System is soliciting bids under solicitation number TAMUS-ITB-26-0544 for the purchase of 3D printers to be used for the Space Collaboration Facility project located in Houston, Texas. This procurement is classified under NAICS code 333998 and is being conducted as an Invitation for Bid. The solicitation was posted on September 10, 2026, with a response deadline of September 24, 2026, at 8:00 PM. All interested vendors must register and submit their bids electronically through the AggieBid portal, as the system will not accept submissions after the specified closing date. Sterling Crowdus serves as the primary point of contact for this effort. While specific evaluation factors and contract values are not detailed in the provided summaries, the procurement is managed by the Texas A&M University System as a state and local education agency.

Texas A&M University System

POSTED

DEADLINE

Supply of Volumetric Flasks (NSN 6640-01-386-4514)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Fluid Filter Element Supplier (NSN 4330124176825)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 4330219146127)

NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

Fleet Logistics Center Puget Sound is conducting market research to identify qualified vendors capable of supplying a Feed Tank Assembly with part number 741670, intended for use in an oily water polishing system aboard naval vessels. The component must be manufactured from SS316 material and fully comply with Technical Manual S9593-DL-MMA-010, specifically figures and index numbers 7-2-1 through 7-2-26, and is classified under NAICS code 333998 with a small business size standard of 700 employees. This is a Total Small Business Set-Aside, meaning only eligible small businesses may respond, and the government is evaluating vendor capabilities to inform future procurement decisions. Respondents must provide their organization name, physical address, CAGE code, email, website, phone number, and small business status, all submitted by the June 1, 2026 deadline to Walid Aslan at walid.m.aslan.civ@us.navy.mil. Participation is entirely voluntary, no quotations are being requested, no financial reimbursement is available for submission costs, and no feedback or evaluations will be provided to respondents.

General Info

Fleet Logistics seeks small business vendors for stainless steel Feed Tank Assembly, responses due June 1, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

WA, JPN

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 22

Sources Sought

Response DeadlineJun 1

Deadline has passed

Submission Closed

06/01/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5100, USA

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5100, USA

Contacts

Walid Aslan

contact@example.gov

Full Description

SOURCES SOUGHT ANNOUNCEMENT

Fleet Logistics Center Puget Sound (FLC PS) is posting a Sources Sought notice, as a means of conducting market research to identify any interested vendors for the procurement of Feed Tank Assembly Part(s), in support of SRF-JRMC.

The applicable North American Industry Classification System (NAICS) code assigned to this requirement is 333998, with a small business size standard of 700 employees.

The results of this market research may contribute to future procurement process decisions. NO feedback or evaluations will be provided regarding any submission against this Sources Sought notice. Please provide responses to this announcement no later than the posted closing date.

DESCRIPTION OF REQUESTED SUPPLIES:

OEM "Aircraft Appliances & Equipment"

QTY 1 - FEED TANK ASSY (P/N: 741670)

MATL: SS316, USE FOR OILY WATER POLISHING SYSTEM, TM: S9593-DL-MMA-010 FIG & INDEX. NO. 7-2-,

CONSIST OF THE FOLLOWING ITEMS: FIG & INDEX. NO. 7-2-1 THROUGH 7-2-26.

All responses to this Sources Sought notice should be emailed to Walid Aslan (walid.m.aslan.civ@us.navy.mil) and include the following information -

Your organization name, physical address, CAGE code, email address, website, telephone number, classification (Small Business/Other Than Small) status under NAICS code 333998.

**THIS IS NOT A REQUEST FOR QUOTE** - submission of any information in response to this Sources Sought notice is purely voluntary and the Government assumes no financial responsibility for any costs incurred. The results of this market research may contribute to future procurement process decisions. No feedback or evaluations will be provided to responses against this Sources Sought notice.