Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

OEM Certification and Technical Documentation Support

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # C2305
Elsinore Valley Municipal Water District is soliciting professional design, bidding support, and engineering services for the replacement of the existing Corydon groundwater production well with a new facility on the same site, utilizing existing transmission infrastructure to maintain and enhance potable water production. The project, funded in part by a U.S. Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, requires comprehensive engineering services across two phases: Phase 1 involves civil site design, technical specifications, and line-bid items for drilling and abandoning the old well, including full-time construction management oversight and bidding assistance; Phase 2 covers architectural, structural, mechanical, electrical, and instrumentation design for equipping, testing, and commissioning the new wellhead facilities, along with continued engineering support during construction. The selected consultant must deliver final 100% design submittals including signed and stamped plans, calculations, permit documentation, an operations plan, a probable cost estimate, and a complete bid schedule, while also providing ongoing services such as response to RFIs, evaluation of change orders, shop drawing reviews, commissioning support, operator training, and record drawing development. All work must comply with Riverside County and California State Water Resources Control Board regulations, federal grant requirements including Good Faith Effort and monthly reporting, and the Buy America provisions under 2 CFR Part 184 and the Build America Act. The solicitation emphasizes the use of DBE, MBE, and WBE firms in key service areas including hydrology/hydraulic modeling, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are evaluated on a weighted basis—qualifications and experience (25%), understanding of project and approach (25%), scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%)—with the award based on demonstrated competence, not lowest price. The successful respondent must submit detailed cost proposals broken down by task with all hourly rates and incidental costs, and will be subject to a negotiated not-to-exceed dollar limit. Payment will be made monthly via the Department of Treasury ASAP system within 45 days of invoice approval, with strict adherence to federal requirements including audit thresholds of $750,000 in federal spending, whistleblower protections, conflict of interest disclosures, drug-free workplace standards, and trafficking in persons prohibitions. All proposals must be submitted via the PlanetBids portal by 10:00 a.m. local time on
TKE Engineering, Inc.

POSTED

about 5 hours ago

DEADLINE

in 27 days
NAICS: 541690
New
SLED
Judith Landing State Park Interpretation Plan
Solicitation # StateOfMontana-FWP-27-0012
Montana Fish, Wildlife & Parks is seeking a qualified interpretive planning consultant to develop a comprehensive interpretive plan for Judith Landing State Park, building upon an existing draft framework to guide future visitor engagement, educational programming, and phased implementation of interpretive media. The consultant will be responsible for refining the conceptual vision, creating a site-specific interpretive concept plan, and delivering actionable, prioritized recommendations that align with the park’s natural and cultural resources. This includes translating interpretive goals into tangible design elements and implementation strategies that enhance the visitor experience while ensuring long-term feasibility and resource compatibility. All proposals must be submitted via the eMACS vendor portal by the deadline of August 20, 2026, following the specified instructions and procedures outlined in the solicitation. Applicants are required to register as vendors, upload responses as attachments, and adhere to all technical requirements detailed in the scope of work and eMACS Vendor Handbook. Questions regarding system functionality or submission processes should be directed to the eMACS Help Desk, while inquiries about the solicitation itself should be addressed to Dani Lindeman at dlindeman@mt.gov. The contract is open to qualified consultants under a state procurement process, with no set-aside designation, and performance will be centered on Judith Landing State Park in Montana.
Montana

POSTED

about 7 hours ago

DEADLINE

in 15 days
NAICS: 541690
New
Federal
R425--Life Safety Drawings
Solicitation # 36C26126Q0995
The Department of Veterans Affairs, through its Network Contracting Office 21, has issued a sources-sought announcement for Life Safety Drawings under solicitation number 36C26126Q0995, exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) as defined under FAR 19.14 and NAICS code 541690, with a small business size standard of $19 million in annual revenue. The work involves conducting on-site surveys at five buildings—2, 22, 22A, 24, and 32—at the VA Central California Health Care System in Fresno, California, to produce updated, code-compliant Life Safety Plans that reflect current as-built conditions. Deliverables include an AutoCAD DWG file and a corresponding PDF version of the plans, along with a Life Safety Code Summary & Legends document detailing occupancy classifications, fire and smoke barriers, sprinkler coverage, smoke compartments, hazardous storage areas, and suite boundaries per NFPA 101, OSHA guidelines, HCSM directives, and other applicable accreditation standards. All work must be coordinated with and approved by the Contracting Officer’s Representative, whose decisions resolve any conflicts between standards. Offerors must be registered in SAM with a valid Unique Entity ID and, if claiming SDVOSB status, must also be certified in the SBA’s VetCert portal. Compliance with FAR 52.219-14 and 52.219-27 requires that at least 50% of the contract’s personnel costs be performed by the prime contractor’s own employees, with full disclosure of in-house versus subcontracted work required. Contractors must provide their own tools and materials, wear both VA-issued temporary security badges and company identification while on-site, and adhere to strict access restrictions that prohibit connection to VA networks or systems. No IT accreditation is required. Work outside normal hours or involving utility shutdowns requires prior written authorization, with shutdown requests submitted at least 21 days in advance. The initial performance period is 90 days from the Notice to Proceed, and offers must include a price estimate for five potential one-year option periods. Proposals must be submitted by July 24, 2026, at 10:00 a.m. Pacific Time via email to Cynthia Diezel, Contract Specialist, and must include the required DWG and PDF Life Safety Plans. This announcement is
261-NETWORK Contract Office 21 (36C261)

POSTED

about 9 hours ago

DEADLINE

in 6 days
NAICS: 541690
New
Federal
Sources Sought - IHS P4 Program Support Contract
Solicitation # IHS1529527
The Indian Health Service is conducting market research through a Sources Sought Notice for the P4 Program Support Contract to evaluate industry capabilities in supporting the Produce Prescription Pilot Program, which aims to improve health outcomes for American Indian and Alaska Native communities by increasing access to fruits, vegetables, and traditional foods through structured food interventions integrated into healthcare settings. This initiative is led by the Division of Diabetes Treatment and Prevention and seeks to determine whether such models can effectively reduce food insecurity and enhance dietary health, ultimately leading to measurable clinical improvements. The notice is not a solicitation or binding commitment but is intended to inform future procurement decisions, including potential set-asides, based on responses received from qualified entities. Responses are due by August 14, 2026, and should be submitted in reference to solicitation number IHS1529527, with the North American Industry Classification System code 541690 applying to the effort. The office handling the procurement is the Division of Acquisitions Policy Headquarters under the Department of Health and Human Services, located in Rockville, Maryland, and primary points of contact for inquiries include Natasha Bitsoi at Natasha.Bitsoi@ihs.gov. The performance location is in Maryland, and all information must be submitted through the official SAM.gov portal. The government encourages eligible entities to respond with detailed information on their capacity to deliver services aligned with the program’s goals, ensuring the development of an effective and culturally appropriate procurement strategy.
Division Of Acquisitions Policy Hq

POSTED

about 9 hours ago

DEADLINE

in 9 days
NAICS: 541690
New
SLED
Consulting Services Cardiologist
Solicitation # 0000039958
The Department of Health Care Access and Information’s Healthcare Analytics Branch is seeking a consulting cardiologist to support the California Cardiovascular Outcomes Reporting Program, which is mandated by state law to annually publish risk-adjusted outcomes reports for hospitals performing coronary artery bypass graft surgery. The program relies on clinical data submitted by approximately 124 licensed California hospitals through the online Cardiac Online Reporting for California system, which aligns closely with the Society of Thoracic Surgeons Adult Cardiac Surgery Database in its data structure. The consultant will provide expert guidance on interpreting data elements from both the STS ACSD and CCORP systems, ensuring accurate analysis and proper understanding of patient medical records underlying the outcomes reports. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is open to qualified professionals through the California eProcurement system. The position requires deep familiarity with cardiac surgery data standards and clinical documentation to support the state’s reporting obligations. All work will be performed within California, and inquiries should be directed to Victor Baker at victor.baker@hcai.ca.gov. There is no set-aside designation specified for this contract, and it is open to eligible consultants regardless of business size or category.
Health Care Access and Informa

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The contract requires the provision of OEM equivalency letters, detailed technical data, and formal justifications for substitute parts proposed by the prime contractor to ensure compliance with bid specifications. These documents must demonstrate that the alternate components meet or exceed the performance, quality, and reliability standards of the original equipment manufacturer's parts, enabling full adherence to technical and operational requirements without compromising system integrity. The effort is critical for securing approval of substitutions in procurement processes governed by stringent defense standards. This engagement is classified as a subcontract under NAICS code 541690, issued by the Department of National Defence of the Government of Canada, with performance expected to support operations in British Columbia and Nova Scotia. The solicitation was posted on May 4, 2026, with responses due by May 19, 2026, indicating a narrow six-week window for submission. All deliverables must be thoroughly documented and certified to satisfy Canadian defense procurement protocols, and failure to provide accurate, verified equivalency materials may render the proposed parts noncompliant, jeopardizing contract award and system deployment timelines.

General Info

Subcontract for providing OEM equivalency letters and technical validation of substitute parts by May 19, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide OEM equivalency letters, technical data, and justification for substitute parts proposed by the prime contractor to meet bid requirements.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 423610
New
International
Siemens 25kA circuit breakers style plug-in units rated at 480/277V with connector and cord
Solicitation # W8474-278700
The Department of National Defence is seeking to procure seventy Siemens 25kA circuit breaker plug-in units rated at 480/277V, each including integrated connectors and cords, along with seventy corresponding Siemens connectors, to upgrade its existing XJ-L busway system from thirty-amp to sixty-amp circuit capacity. These components are specifically designed for compatibility with the Siemens XJ-L series and must be delivered to Ottawa, Ontario, no later than 30 November 2026. The requirement stems from the need to enhance power distribution capacity within current infrastructure without replacing the entire busway system, ensuring seamless integration with existing equipment. All suppliers may submit offers in response to this solicitation, which follows a competitive procurement process where the lowest evaluated compliant bid will be selected for award. The procurement is not subject to any Comprehensive Land Claims Agreement and carries no security requirements. Bids must comply fully with the specifications outlined in the Statement of Requirement and be submitted by 14:00 Eastern Time on 4 August 2026. Documents may be submitted in either English or French, and the Crown reserves the right to engage in negotiations with suppliers. The solicitation number is W8474-278700, and inquiries may be directed to Brooke Monette at the Department of National Defence.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 16 days
View Details
NAICS: 314994
New
International
POLYESTER FIBROUS CORD
Solicitation # W8485-279524
The Department of National Defence is procuring 120,000 feet of polyester fibrous cord under solicitation W8485-279524, with delivery required by February 18, 2027, to the 7 Canadian Forces Supply Depot in Edmonton, Alberta. The item, identified by UNSPSC 31152100, NSN 4020-01-593-3517, and part number DCCB-1800-YG, must be supplied in 80 spools of 1,500 feet each, with offering contractors required to clearly state the part number and NSCM/CAGE code for any equivalent or substitute product and provide a certificate of conformance from the original equipment manufacturer. The solicitation operates under a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where all offers must satisfy mandatory technical criteria—including full compliance with specification details, traceability of materials, material condition, and acceptance of all contract terms—before price becomes the determining factor. The contract is fixed-price and non-segmented, with no options, renewals, or additional quantities permitted. Packaging must adhere to Canadian government green procurement policies, requiring reusable, recyclable, or returnable materials, with ISPM 15 compliance for any wood packaging; palletized shipments exceeding 0.566 cubic meters or 15.88 kilograms must use standard pallets with strict dimensional controls and clear labeling. Goods must be delivered FOB Destination, delivered duty paid, with the contractor responsible for all transportation costs, duties, and taxes. Inspection may occur at the supplier’s facility, but formal acceptance takes place at the delivery location, and the contractor remains liable for any non-conforming items even after acceptance. The contractor must maintain ISO 9001:2015 compliant quality systems, provide audit-ready documentation, and comply with ethical standards prohibiting bribes, conflicts of interest, and forced labor. No security clearance is required, and all submissions must be made via CPC Connect, mail, courier, or fax to the designated address by the August 11, 2026 deadline, with proposals required in both technical and financial volumes, along with completed declaration and submission forms. Invoices must include the client reference number and applicable financial codes, though payment processing details and specific invoicing systems are not identified. The Crown reserves the right to negotiate terms with
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 16 hours ago

DEADLINE

in 27 days
View Details
NAICS: 337211
New
International
Office furniture sub-category 2 - Desk - Base Only
Solicitation # W6766-26-CS089
This solicitation under Supply Arrangement E60PQ-140003/D seeks the supply of electronic height-adjustable desk bases categorized as Product Sub-Category 2, for delivery to 60 Moodie Drive in Ottawa, Ontario, within the National Capital Region. Only suppliers who are already pre-qualified under this specific supply arrangement are eligible to bid directly; non-SA holders may submit proposals but must simultaneously apply for and secure the applicable supply arrangement prior to award, and the government is under no obligation to delay award pending their qualification. The desk bases must be electronically adjustable with a height range of 28.3 inches to 46.5 inches and compatible with tabletops measuring between 39.4 and 63 inches in length and 23.6 to 27.6 inches in depth, with functional equivalence to the specified product allowed if all technical criteria are met. Delivery is mandatory to the designated location, and installation is handled exclusively by Public Services and Procurement Canada, with no responsibility placed on the supplier. The requirement carries no security clearance obligations, and no specific packaging, marking, or invoicing instructions are detailed. The solicitation closes on August 10, 2026, and responses must be submitted electronically through the Government Electronic Tendering Service. Contract award is not guaranteed to follow lowest price technically acceptable principles, and no formal evaluation factors, weights, or contract value estimates are disclosed. The contracting authority is Gabriella Sabou, and general inquiries regarding supplier qualification may be directed to the designated procurement email. No contract clauses, representations, certifications, or accounting data are included within the provided documentation.
Wood Office Furniture Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333995
New
International
ACTUATOR, HYDRAULIC-PNEUMATIC, LINEAR
Solicitation # W8482-275493/A
The Department of National Defence is seeking bids for two identical hydraulic-pneumatic linear actuators, part number 700784-064-999, manufactured by DRESSER CANADA INC VALVE AND CONTROLS CANADIAN OPN, with each unit to be delivered to either CFB Halifax, Nova Scotia or CFB Esquimalt, British Columbia, two units per location. All offers must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the final destination. Bidders proposing equivalent or substitute products must clearly identify the brand, model, part number, and NCAGE code of the alternative item. Submission requires completion and upload of three mandatory annexes in their original formats: Offeror Submission Details in both Excel and PDF, Offeror Submission Form in PDF, and Offeror Declaration Form in PDF. Proposals must be received by August 20, 2026, at 19:00 UTC, and all documents may be submitted in either English or French. The Crown reserves the right to negotiate with any supplier, and all offerors are bound by the terms and conditions outlined in the solicitation, referenced by its number W8482-275493/A and posted date of August 5, 2026. Additional requirements are detailed in the Statement of Requirements annex, and inquiries should be directed to Contracting Authority Jean-Pierre Normandin at the provided email.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
International
Procurement of CABLE ASSEMBLY, POWER, ELECTRICAL
Solicitation # W8486-270955/A
The Department of National Defence is seeking proposals for 400 power electrical cable assemblies, identified by GSIN 6150 and NSN 6150-01-022-6004, with part number 11682336-1 or an acceptable equivalent, manufactured by NCAGE 19207. Each of the 200 units is to be delivered to either 25 CFSD Montreal at 6363 Rue Notre Dame St E, Montreal, QC H1N 2E9, or 7 CFSD Edmonton at 195 Ave & 82nd St, Building 236, Edmonton, Alberta T5J 4J5. Offerors must explicitly provide the part number and manufacturer NCAGE, and if proposing an equivalent or substitute product, must specify the brand name, model, part number, and NCAGE of the alternative. This procurement is conditionally reserved for Aboriginal businesses under the federal government’s Procurement Strategy for Aboriginal Business, and interested parties must comply with the requirements outlined in Annex 9.4 of the PWGSC Supply Manual. The solicitation, numbered W8486-270955/A, was posted on August 5, 2026, with a response deadline of September 3, 2026, and all submissions must be received by 8:00 PM Eastern Time. The Crown reserves the right to negotiate with any supplier, and documents may be submitted in either English or French. Primary contact for inquiries is Emma Wood, Contracting Authority, reachable via email at emma.wood@forces.gc.ca or phone at 343-616-1706.
Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
International
STRAINER, SEDIMENT
Solicitation # W8482-275445/A
The Department of National Defence is seeking offers for two identical sediment strainers, part number 8609094, manufactured by SPIRAX SARCO CANADA LTD, with a total requirement of 30 units—20 to be delivered to CFB Halifax, Nova Scotia, and 10 to CFB Esquimalt, British Columbia. The solicitation, identified by number W8482-275445/A and posted on August 5, 2026, requires bids to be submitted by August 20, 2026, and all proposals must be evaluated on a Delivery Duty Paid basis, meaning the vendor is responsible for all costs and risks until delivery at the specified locations. Offerors must submit required annexes in both original Excel and PDF formats, including the Offeror Submission Details, Offeror Submission Form, and Offeror Declaration Form, with all documentation acceptable in either official language of Canada. Any substitution or equivalent product must be clearly identified with its brand, model, part number, and NCAGE code. The Crown reserves the right to negotiate with any supplier, and submission of an offer constitutes full acceptance of all terms and conditions outlined in the solicitation documents, including the attached Statement of Requirements. Point of contact for inquiries is Jean-Pierre Normandin, Contracting Authority, reachable via email at jean-pierre.normandin@forces.gc.ca.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 15 days
View Details
NAICS: 236220
New
International
Modular Gym
Solicitation # W0100-18857336
The Department of National Defence is seeking a modular gym system to be installed at CFB Halifax, Windsor Park, specifically designed for durable, outdoor use supporting both individual and group physical training. The system must include a modular shell constructed of galvanized steel with a powder-coated or equivalent corrosion-resistant finish, resistant to rust and weather exposure, with component dimensions between five by eight feet and six by twelve feet, a primary entry no smaller than four feet wide by eight feet high, and a total system weight not exceeding 5,000 pounds. The equipment must feature five pull-up stations, two dip stations, two integrated squat rack stations with compatible J-cups, a climbing or rope tower of at least twelve feet height, a rustproof steel wall ball target at approximately ten feet, a battling rope anchor point, and integrated storage for weight plates, sleds, barbells, and general shelving. Additional equipment includes medicine balls, kettlebells, Olympic barbells, plastic agility cones, two jump ropes, and one drag/pull sled. The contractor must deliver and install the system on an existing concrete pad, level it, and assemble all components at the designated location. Installation must be completed by December 31, 2026, with a detailed installation plan submitted at least fourteen days prior to delivery and a maintenance guide delivered in English PDF format upon completion. The system must come with a warranty covering the shell and attachments. All packaging must comply with mandatory environmentally preferable standards, requiring materials to be reusable, returnable, or recyclable as defined in the solicitation, with packaging tape excluded and specialized packaging permitted only where technically necessary. Shipments exceeding 0.566 m³ or 15.88 kg must be palletized using standard 1.22 m x 1.02 m four-way wood pallets at no charge to the government, with total height not exceeding 1.19 m and payloads not extending more than 2.54 cm beyond pallet edges. Items must be grouped by stock number on the same pallet, with mixed-item pallets clearly marked. Oversized or heavy items over 1.22 m in length or 453.6 kg must be secured to larger pallets or mounted on 10.16 cm x 10.16 cm skids spaced at least 71.12 cm apart. Shipping documentation must include a packing slip with item, quantity, part numbers, description, contract ID
Commercial and Institutional Building Construction

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811420
New
International
Warranty and Technical Support ServicesThe contract pertains to the provision of warranty services and technical support for all delivered machines, encompassing full-service response, parts replacement, and on-site repairs to ensure operational continuity. These services are required to meet defined performance standards and must be available throughout the contract period to support machinery deployed across Canada, with primary performance centered in Oromocto, New Brunswick. The scope includes timely diagnostics, preventive maintenance, and resolution of mechanical or technical failures, with an emphasis on minimizing downtime and maintaining equipment reliability in accordance with agreed-upon service level parameters. Issued as a subcontract under the NAICS code 811420 for repair and maintenance services, the opportunity is managed by the Department of National Defence on behalf of the Government of Canada. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, creating a competitive window for qualified vendors to submit proposals. While no specific set-aside designation or point of contact is provided, the requirement is open to subcontractors capable of delivering comprehensive, on-site technical support within the Canadian defense infrastructure framework. All work must align with federal procurement guidelines and expectations for responsiveness, quality, and accountability in supporting mission-critical equipment.
Reupholstery and Furniture Repair

POSTED

1 day ago

DEADLINE

in 12 days
View Details