Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

OILER, HAND

Active
SPE8E9-26-T-3209Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 621 units of a hand oiler with a 1/4 pint capacity and rigid construction, identified by NSN 4930-00-262-8870 and part number A-50477-B0-B-A, in accordance with Commercial Item Description A-A-50477C and DLA technical requirements. The oilers must meet Class B specifications, requiring polished brass or copper coating, nickel plating, or baked enamel finish with clear lacquer or varnish, and must be marked per MIL-STD-130N for military property identification. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement and palletization standards, with all labeling and marking in full alignment with government directives. The item is subject to DLA’s Master List of Technical and Quality Requirements, which governs all specifications and takes precedence over other standards. Delivery is required within 37 days of award, with delivery point set as origin and inspection and acceptance occurring at destination. The quantity tolerance is strictly zero percent variance, and shipment must be ready by September 10, 2026, with an original required delivery date of February 19, 2027. Transportation and shipping instructions refer to DLAD Proc Notes C19 and C20, with the delivery address to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation, issued under contract number SPE8E9-26-T-3209, was posted July 22, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 333914 for federal acquisition with full and open competition. Total contract value is $621 at $1.00 per unit, and all provisions for defense information and government identification removal apply as outlined.

General Info

621 hand oilers, NSN 4930-00-262-8870, Class B finish, MIL-STD-130N marked, delivery by Sept 10, 2026, $1 each.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3209.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
OILER,HAND
OILER, HAND. SIZE 1/4 PINT CAPACITY, RIGID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPOUT, CLASS B. CLASS B OILERS SHALL BE
POLISHED, BRASS OR COPPER COATED; OR PLATED,
WITH A COAT OF CLEAR LACQUER OR VARNISH;
LACQUERED WITH AN OPAQUE LACQUER; OR NICKEL
PLATED OR BAKED ON ENAMEL FINISH.
PER COMMERCIAL ITEM DESCRIPTION ENTITLED:
"OILERS, HAND PUMP."
IDENTIFY TO:
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY FULL AND OPEN COMPETITION APPLY
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPECIFICATION
TDP Rev A Gen 1 IAW BASIC CID A-A-50477C NOT 3 REVISION NR C DTD 12/08/2019 PART PIECE NUMBER: P/N A-50477-B0-B-A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585538 0001 EA 621.000
NSN/MATERIAL:4930002628870
DELIVERY (IN DAYS):0037
SPE8E9-26-T-3209
SECTION B
PR: 7017585538 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/10/2026 Original Required Delivery Date:02/19/2027
SPE8E9-26-T-3209 NSN/Part Number: 4930-00-262-8870 Quantity: 621 EA Purchase Request: 7017585538QTY: 621 Delivery: 37 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of two reciprocating pumps with NSN 4320-01-304-1371 and part number RPA308112C, issued under solicitation SPE7M1-26-T-221Q by the Department of Defense’s Maritime Supply Chain. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all supplies must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with packaging and labeling controlled by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The Unit of Issue is each, and palletization must adhere to DLA’s RP001 packaging requirements. The items are to be delivered to USNS YUKON T-AO 202 at FPO AP 96686, with transportation details governed by DLAD PROC NOTE C19 and C20. The original required delivery date is July 20, 2026, and the contract includes specific government-only codes for logistics tracking and distribution. All technical and quality specifications referenced via R or I numbers are sourced from the DLA Master List, whose applicable revision is determined by the solicitation issue date or any amendment date.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
NOZZLE, FUEL AND OILThe contract is for the procurement of 51 units of a NOZZLE, FUEL AND OIL with NSN 4930-01-661-7722 under solicitation number SPE8EE-26-T-2162, issued as a Total Small Business Set-Aside through the SBA program. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined based on solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 167 days after award, with performance location specified as New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the NAICS code 333914 identifies the industry as Other Engine Equipment Manufacturing. The contracting office is part of the Department of Defense under the Construction & Equipment Manu & Con organization, with Philip Ferrara listed as the primary point of contact reachable via email and phone. All details are accessible through the DIBBS platform using the provided UI link.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
SPIDER, SWITCH HOUSINGThe contract pertains to the procurement of 25 units of SPIDER, SWITCH HOUSING with NSN 4930-01-176-1204 under solicitation SPE8EE-26-T-2145, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 167 days after award, and responses must be submitted by August 3, 2026. The solicitation incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and compliance is mandatory. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must be shock-proof and include a secondary containment boundary as per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and the place of performance is designated as Tracy, California, with Philip Ferrara designated as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
PROBE ASSEMBLY, WATEThe contract specifies the procurement of a Probe Assembly, Water Detector Kit with part number GTP-3422-1 from GAMMON TECHNICAL PRODUCTS INC, identified by NSN 4930-01-017-3638 and purchase request 7017586052. A total quantity of 97 units is required at a unit price of $97.00, resulting in a total contract value of $9,409. Delivery is due within 167 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item is designated as a critical application requiring source inspection due to its technical sensitivity and proprietary data, which limits competitive procurement. Packaging must comply with ASTM D3951 and fully adhere to DLA Master List of Technical and Quality Requirements, including MIL-STD-129 marking and labeling, with palletization following RP001 standards. All packaging must be marked and handled according to DLA procurement guidelines, and the delivery address is W62G2T, W1A8 DLA DIST SAN JOAQUIN, Tracy CA 95304-5000. The original delivery date is January 26, 2027, with a need ship date of January 18, 2027, under solicitation SPE8EE-26-T-2146. Technical and quality specifications referenced from the DLA Master List take precedence over all other standards, and drawings are available only during the open solicitation period via the DIBBS portal.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
NOZZLE, FUEL AND OIL SEThe contract is for the procurement of seven NOZZLE, FUEL AND OIL SERVICING units with NSN 4930-00-861-9982 under solicitation SPE8EE-26-T-2142, which is a total small business set-aside under NAICS code 333914. Delivery is required within 167 days of award, and the offeror must supply components that conform to specified source control drawings from approved sources. All items must be marked per MIL-STD-130N for identification of U.S. military property. Quality assurance is governed by MIL-STD-1916 or equivalent zero-based sampling plans, with undefined attributes treated as major and verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Acceptance standards require zero non-conformances unless otherwise stated, and manufacturers may choose attribute or variable inspection methods unless contract-specified. The contract incorporates technical and quality requirements from the DLA Master List and mandates compliance with DLA packaging standards and the removal of government identification from non-accepted supplies. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to export-controlled technical data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA approval. All technical data is subject to DFARS 252.225-7048, and the primary point of contact is Philip Ferrara at DLA with a response deadline of August 3, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
LUBRICATING GUN, HANDHEThe contract specifies the procurement of 588 handheld lubricating guns under NSN 4930-00-253-2478, with delivery required within 63 days FOB origin to the designated receiving warehouse in Tracy, California. Only approved manufacturers—including Lincoln Industrial Corporation, Weems Industries, Worldwide Welding, Navistar, and Caterpillar—are permitted to supply the exact part numbers listed, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. The goods must be packaged and labeled per MIL-STD-129 and palletized according to DLA’s RP001 packaging requirements, with no intentional addition of mercury or mercury-containing compounds except for specified exceptions like batteries or sensors. The contract prohibits any variance in quantity and mandates inspection and acceptance at the destination. All packaging must reflect the correct Unit of Issue and Quantity per Unit Pack as defined in the purchase order, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract number is SPE8E9-26-T-3203 with a required ship date of October 6, 2026 and original delivery date of November 8, 2026, and the primary point of contact is Matthew Kruc at DLA.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
HOUSING, BEARINGThe contract pertains to the procurement of a housing and bearing component identified by NSN 4930-01-118-1265 and part number 99138431, with a quantity of eight units to be supplied by Alfa Laval Separation Inc in Warminster, PA. Delivery is required within 167 days from the contract award, with a required ship date of January 18, 2027, and an original delivery deadline of October 22, 2026. The item must be delivered FOB origin with zero variance in quantity and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containers, and all marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the shipment is directed to the DLA Distribution facility in New Cumberland, PA. The component is designated as a critical application item and is subject to strict prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, all of which must meet additional containment standards as defined by NAVSEA 5100-003D. The product also falls under Covered Defense Information requirements and must comply with MIL-STD-130N for identification marking. The contract is issued under solicitation SPE8EE-26-T-2143, with pricing at $8 per unit, totaling $64, and adheres to DoD authorized units of issue. All technical and quality requirements are referenced from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition scale. The point of contact for the procurement is Philip Ferrara at the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
SPIDER, SWITCH HOUSI
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
DISPENSING PUMP, HAN
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
PUMP, LUBRICANT TRANSFE
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
LUBRICATOR
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
Federal
49--LUBRICATOR
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract is for the procurement of 13 shipping units of clear acrylic plastic sheeting measuring 60 inches long by 36 inches wide and 0.750 inches thick, identified by NSN 9330-00-483-3433. The product must meet the technical specifications of MIL-PRF-5425E Revision E dated August 22, 2019, and be sourced from a manufacturer already approved on the Qualified Products List at the time of contract award. The sheeting is classified as a critical application item and must comply with all DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specific permitted uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 167 days of contract award, with an original delivery date of December 3, 2026, and a needed ship date of January 18, 2027. The quantity is fixed with zero variance allowed. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, avoiding plastic as wrapping, cushioning, or dunnage whenever possible. Marking shall conform to MIL-STD-129 with no special marking code applied. All shipments must be palletized in accordance with DLA standards and sent to the designated delivery address in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination. The contract is governed under solicitation SPE8E9-26-T-3199, with a response deadline of August 3, 2026, and is issued under NAICS code 326113. Point of contact for inquiries is Matthew Kruc, DLA.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThis contract specifies the procurement of an electrostatic air filter with NSN 4460013113732 and part number 441076-001, supplied by AIR SYSTEMS COMPONENTS INC, under solicitation SPE8E9-26-T-3219. Six units are required at a unit price of $6.00, with total contract value of $36.00, delivered FOB origin within 167 days from the contract date. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking applicable. Packaging must adhere to DLA’s procurement guidelines and be palletized per RP001, with shipments directed to DLA Distribution Jacksonville at the specified address. The filter is designated as a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for authorized exceptions such as functional mercury in batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333413, with responses due by August 3, 2026, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RQ and RD identifiers. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and transportation protocols follow DLAD Proc Notes C19 and C20.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334610
New
DIBBS
CARTRIDGE, TONERThis contract is for the procurement of toner cartridges identified by NSN 7045-01-643-9438 and part number 70C0HCG, supplied by Lexmark Intl Inc Federal Sales Division, under solicitation SPE8E9-26-T-3236. A total of 93 units are required at a unit price of $93.00, for a total contract value of $8,649.00, with delivery due 31 days after award, no later than December 20, 2026. All items must be delivered FOB origin, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container codes, and marking per MIL-STD-129 with no special marking required. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The contract incorporates DLA's Master List of Technical and Quality Requirements, with all referenced technical standards being applicable unless otherwise modified by solicitation amendments. Mercury or mercury-containing compounds are strictly prohibited in the toner cartridges or their components, except for functional uses in batteries, fluorescent lamps, sensors, or specialized instruments as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The contract also notes that no approved technical data package is currently available from DLA Troop Support for this NSN, and suppliers are instructed not to request one. Unit of issue is EA, consistent with DoD standards, and the item falls under NAICS code 334610. The contract is subject to Covered Defense Information requirements, and all submissions must adhere to federal procurement protocols through the DLA eProcurement system.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract calls for the procurement of plastic sheets made of cellulose acetate, compliant with specification L-P-504, Type 1, characterized by a clear, high polish finish, with nominal dimensions of 20.000 inches in width, 0.060 inches in thickness, and 50.000 inches in length. Each sheet must be packaged in containers marked with the instruction “STORE FLAT KEEP COOL AND DRY” on at least one side and wherever practicable on two opposite sides. The material is identified by NSN 9330-00-202-3642 and is being procured under solicitation SPE8E9-26-T-3198 for a total quantity of 111 sheets, with a purchase request number of 7017585375 and a delivery deadline of 84 days after order. Packaging and labeling requirements adhere strictly to government standards, including the mandatory removal of any government identification from non-accepted supplies. All sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The manufacturer may elect either attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance requires zero non-conformances. The product must also comply with MIL-STD-130N for identification marking of U.S. military property. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 326113, issued by the Department of Defense under the Construction & Equipment MRO SVC I office, with performance location at Robins AFB, Georgia, and primary point of contact Matthew Kruc.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIOHamilton Sundstrand Corporation, identified by CAGE code 99167, is contracted to supply identification plates with part number 745184-7 under solicitation SPE8E9-26-T-3235, with a total quantity of 64 units at a unit price of $64.00, resulting in a total contract value of $4,096.00. The item is designated by NSN 9905-01-672-4912 and must be delivered FOB origin within 167 days of contract award, with the original required delivery date set for March 22, 2027, and a needed ship date of January 18, 2027. Inspection and acceptance both occur at the destination, and no quantity variance is permitted. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. All packaging must also meet the Unit of Issue and Quantity per Unit Pack as specified in the contract. Delivery is directed to DLA Distribution Depot Hill at Hill AFB, Utah, via the freight shipping address provided, with transportation governed by DLAD Proc Notes C19 and C20. The contract references multiple technical and quality control codes, including RD003 regarding Covered Defense Information, and requires documentation for source approval per RC001. The supplier must also remove government identification from non-accepted supplies per RQ011. All applicable requirements are controlled by the version of the DLA Master List in effect on the solicitation issue date.
Sign Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER ELEMENT, AIR CONThis contract is for the procurement of eight air conditioning filter elements with NSN 4130012053774, issued under solicitation SPE8E9-26-T-3213 by the Department of Defense through DLA Troop Support. The supplier must deliver the items FOB origin with no variance in quantity, and inspection and acceptance will occur at the destination. The delivery timeline requires shipment no later than January 18, 2027, with an original required delivery date of November 14, 2026, and a total contract value of $64.00 at $8.00 per unit. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods and unit container codes, and all marking must follow MIL-STD-129K, with MIL-L-61002 requirements waived. Plastics are to be avoided in wrapping, cushioning, or dunnage where possible. The item is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited unless functionally necessary in specific applications like batteries or instruments, and even then must have dual containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced electronically, and the contract includes controlled information provisions. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are detailed in DLAD procedural notes.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BINDER, LOADThis contract issued by the Defense Logistics Agency under solicitation SPE8E9-26-T-3214 requires the procurement of 508 units of a binder, load item identified by NSN 3990-01-479-0538 and part number 12421708, with a unit price of $508.00 and a total contract value of $258,064.00. Delivery must be completed within 221 days of award, with FOB origin terms, inspection and acceptance occurring at destination, and no quantity variance allowed. The item must be packaged per ASTM D3951, with all labeling and marking strictly following MIL-STD-129, and palletization in compliance with DLA packaging requirements. Technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements take precedence over any general packaging standards. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998, with the primary point of contact being Matthew Kruc at DLA. The item is designated as a critical application and potentially involves covered defense information. The forging process is specified for manufacturing, and specific approved sources include BAE Systems, W.H. Smith Hardware, AMZ Alabama, Buffers USA, and The Crosby Group. Ship date is March 13, 2027, with original delivery required by April 22, 2027. All shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLA transportation protocol C19 for freight and C20 for first destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise technical and quality requirements, including a thickness of 0.063 inches, width of 48 inches, length of 96 inches, and a weight of approximately 28.16 pounds per sheet. The material must conform to alloy 5052 in temper H32 and meet specifications SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with full compliance to the referenced Technical Data Package revisions. All sheets must be supplied in whole-foot lengths only, with no test coupons permitted, and must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. A Certificate of Quality Compliance with mill materials certification is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Markings must be applied via stamping or stenciling, using waterproof, non-contaminating fluids, and must remain legible under normal handling; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal OD. Compliance with MIL-STD-129 and MIL-STD-2073-1E packaging standards is required, including Level A preservation per ASTM B660 and special marking instructions where applicable. The Qualified Suppliers List for Distributors (QSLD) is strictly enforced, and only suppliers listed on the QSLD are eligible to respond; any deviation must be explicitly noted and may result in rejection or criminal penalties for unauthorized substitution. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at destination, within 17 days of order placement, to the designated DLA distribution facility in New Cumberland, PA. The original required delivery date is December 7, 2026, with a need ship date of August 21, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract specifies the procurement of a tube axial fan with NSN 4140011636009 and part number 033037000 from ROTRON INCORPORATED, for a quantity of nine units, under solicitation SPE8E9-26-T-3215. Delivery is required within 215 days from the contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. The item is subject to critical application standards and covered defense information protocols. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses like batteries, fluorescent lamps, or specialized instruments, and where allowed, must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Bare items must be marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Traceability to NAVAIR aircraft launch and recovery equipment standards applies, and all materials must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract. The unit of issue is each, priced per unit, with total value derived from the fixed quantity.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details