Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

OILER, HAND

Active
SPE8E9-26-T-3298Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 453 hand oilers with a 1-pint capacity, identified by NSN 4930-00-262-8868 and part number A-A-50477-A5-D-D, in compliance with Commercial Item Description requirements. The oilers must be lever-operated with a flexible style 5 spout, measuring 13 inches, and have a minimum capacity of 14 ounces. Construction materials are limited to cold-rolled steel or high-density polyethylene, with finish numbers 1 through 6 acceptable. All bare items must be marked with the contract number, NAWC CAGE code, and part number per technical drawings, and must meet NAVAIR aircraft launch and recovery equipment traceability standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The product must adhere to MIL-STD-2073-1E packaging standards, prohibiting plastic packaging materials, and must be marked per MIL-STD-129 without special marking codes. The item is classified as a critical application item and is subject to DLA’s master list of technical and quality requirements. Delivery is FOB origin with a 158-day lead time and a required delivery date of April 1, 2027, though the need ship date is set for January 23, 2027. The quantity has zero variance tolerance, and inspection and acceptance occur at destination. Packaging and palletization must conform to DLA procurement requirements, with all units shipped in unit containers of 10, palletized according to specified guidelines. The delivery address is W1A8 DLA Dist San Joaquin in Tracy, CA, with transportation governed by DLAD Proc Note C19 for onward shipment and C20 for first destination. The solicitation number is SPE8E9-26-T-3298, issued under NAICS code 333914, with a response deadline of August 17, 2026. The contract was posted on August 5, 2026, and the point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.

General Info

453 lever-operated hand oilers, 1-pint, steel or HDPE, FOB origin, delivery April 1, 2027, DLA compliance, zero variance.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3298 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
OILER,HAND
OILER, HAND.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
A-A-50477-A5-D-D
CLASS A, LEVER OPERATED WITH HANDLE
STYLE 5 FLEXIBLE SPOUT
SPOUT LENGTH CODE D
SIZE CODE D, 1 PINT
PUMP TYPE, WITH HANDLE.
1-PINT CAPACITY, 13 INCH FLEXIBLE (STYLE 5)
SPOUT; IAW COMMERCIAL ITEM DESCRIPTION
ENTITLED "OILERS, HAND, PUMP."
EXCEPTION: MINIMUM CAPACITY SHALL BE 14 OUNCES.
BODY, HANDLE, AND SPOUT MATERIAL MAY BE COLD
ROLLED STEEL OR HIGH DENSITY POLYETHYLENE;
FINISH NUMBERS 1 THROUGH 6 ARE ACCEPTABLE.
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
SPE8E9-26-T-3298
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-50477C NOT 3 REVISION NR C DTD 08/12/2019 PART PIECE NUMBER: A50477-A5-D-D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757315 0001 EA 453.000
NSN/MATERIAL:4930002628868
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:006 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
NO PLASTIC PACKAGING MATERIALS PERMITTED.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
SPE8E9-26-T-3298
SECTION B
PR: 7017757315 PRLI: 0001 CONT’D
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/23/2027 Original Required Delivery Date:04/01/2027
SPE8E9-26-T-3298 NSN/Part Number: 4930-00-262-8868 Quantity: 453 EA Purchase Request: 7017757315QTY: 453 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
PUMP, BUCKET, LUBRICA
Solicitation # SPE8EE-26-T-2220
The contract solicits 39 units of a hand-operated, T-handle pressure pump system designed for lubrication use, which includes a heavy-duty 3/8-inch I.D. hose between 6 to 10 feet long, a follower plate, and a container with a foot step and leakproof cover that supports the pump head. All items must comply with DLA packaging requirements and incorporate technical and quality standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date. The product must be marked in accordance with MIL-STD-130N for U.S. military property identification, and the contractor is required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair with each unit. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major with verification levels assigned accordingly. The solicitation number is SPE8EE-26-T-2220, issued August 5, 2026, with responses due by August 17, 2026, under NAICS code 333914 for construction and equipment manufacturing. Delivery is due within 167 days of award, and performance is to be completed at New Cumberland, Pennsylvania, with Philip Ferrara identified as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
MANIFOLD, FUELING TA
Solicitation # SPE8EE-26-T-2228
The contract is for the procurement of 47 units of a manifold designed for fueling tank trucks, identified by NSN 4930-01-085-2652 and part of Purchase Request 7017758328. The item features a 4-inch valve size and is subject to DLA packaging requirements, which incorporate technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements. Covered Defense Information potentially applies, and removal of government identification from non-accepted supplies is mandated. The solicitation, issued under number SPE8EE-26-T-2228, is set aside entirely for small businesses as defined under FAR 19.5, with a NAICS code of 333914. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the delivery deadline is 167 days after award. Performance will occur in Texarkana, Texas, under the jurisdiction of the Department of Defense’s Construction & Equipment Manufacture and Construction office, with Philip Ferrara listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
COLLAR, NOZZLE
Solicitation # SPE8EE-26-T-2287
The contract pertains to the procurement of 50 units of a COLLAR, NOZZLE with NSN 4930-01-385-9453 under solicitation SPE8EE-26-T-2287, issued by the Department of Defense through the Defense Logistics Agency. The requirement is for delivery within 167 days from award, with performance expected at Tracy, California, 95304-5000. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling for this simplified acquisition. The supplier must comply with all referenced R and I numbers incorporated by reference, including documentation requirements for source approval requests and the mandatory removal of government identification from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable devices containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The contracting officer is Philip Ferrara, reachable via email and phone, and responses to the solicitation are due by August 17, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
REEL ASSEMBLY, STATI
Solicitation # SPE8EE-26-T-2255
The contract specifies the procurement of 20 units of a static discharge reel assembly with a left-side mounted crank, identified by part number MRGR75-50 and NSN 4930-01-645-6980, manufactured by HANNAY REELS INC. The item must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s Packaging Requirements for Procurement, with all units delivered FOB origin and inspected and accepted at the destination. The delivery window is 167 days from the contract date, with a required ship date of February 1, 2027, and the original delivery target was October 27, 2026. Quantity tolerance is strictly zero percent variance. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics must comply with DLAD Proc Notes C19 and C20. The contract falls under solicitation SPE8EE-26-T-2255, issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 333914 for construction and equipment manufacturing. The unit of issue is each, priced at $20.00 per unit, totaling $400.00, and government identification must be removed from any non-accepted supplies. Covered defense information may apply, and all documentation must reference the current DLA Master List revision effective as of the solicitation issue date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
SEAL, LOWER CAN
Solicitation # SPE8EE-26-T-2232
The contract pertains to the procurement of 15 units of SEAL, LOWER CAN with NSN 4930-01-193-8782, under solicitation SPE8EE-26-T-2232, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required FOB origin within 167 days of contract award, with no tolerance for quantity variance—exactly 15 units must be delivered. Inspection and acceptance occur at the destination, specifically at DLA Distribution Cherry Point, North Carolina, with packaging mandated to comply with ASTM D3951, unless overridden by higher-priority DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The item must be marked and addressed for parcel post to the designated Cherry Point facility, with transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 24, 2027, with a need ship date of February 1, 2027. Unit price is $15.00 per unit, totaling $225.00, with the purchase request number 7017758201. The contract incorporates all applicable DLA technical and quality standards referenced by R or I numbers from the official DLA Master List, and government identification must be removed from non-accepted supplies. The solicitation was posted August 5, 2026, with responses due August 17, 2026, under NAICS code 333914 for Construction & Equipment Manu & Con.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
GUN, FLUID, DIRECT DE
Solicitation # SPE8EE-26-T-2258
The contract solicitation is for 20 units of a fluid gun with direct delivery capability, identified by NSN 4930-01-676-5942, under purchase request 7017757477. The solicitation number is SPE8EE-26-T-2258, issued on August 5, 2026, with responses due by August 17, 2026. Delivery is required within 167 days after award, and the place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The North American Industry Classification System code is 333914, and the contracting agency is the Department of Defense under the Construction & Equipment Manu & Con organization. The primary point of contact is Philip Ferrara, reachable via email and phone provided. The contract encompasses covered defense information and requires compliance with DLA packaging standards as outlined in RP001, along with all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed via the official DLA website. Compliance is governed by the version of the master list in effect on the solicitation issue date for simplified acquisitions, and the removal of government identification from non-accepted supplies is mandatory per RQ011.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
LUBRICATOR
Solicitation # SPE8EE-26-T-2280
The contract is for the procurement of a lubricator with NSN 4930-01-627-2866, quantity of 31 units, under purchase request 7017757293. The delivery must be completed within 167 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. All supplies must comply with DLA packaging requirements specified in RP001, and non-accepted items must have government identification removed as required by RQ011. The solicitation number is SPE8EE-26-T-2280, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 333914 and the contracting agency is the Department of Defense under Construction & Equipment Manu & Con. The place of performance is Tracy, California, 95304-5000. Primary point of contact is Philip Ferrara, reachable via email at philip.ferrara@dla.mil or phone at 4457370151. The solicitation is open through the DIBBS portal at the provided UI link.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
VENT UNIT, RELIEF
Solicitation # SPE8EE-26-T-2234
The contract is for the procurement of 48 units of a VENT UNIT, RELIEF with NSN 4930-01-252-6452 under solicitation number SPE8EE-26-T-2234, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and requires delivery within 167 days after award. All applicable technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision dependent on whether the acquisition is simplified or large and the applicable date of solicitation, award, or amendment. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Philip Ferrara, reachable via email and phone provided. The NAICS code 333914 indicates the item falls under Other Engine Equipment Manufacturing, and the contract type is a federal solicitation with no set-aside designation. Compliance with DLA packaging requirements and the removal of government identification from non-accepted supplies are mandated.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
ADAPTER, PRESSURE FUEL
Solicitation # SPE8EE-26-T-2256
The contract pertains to the procurement of eight ADAPTER, PRESSURE FUEL SERVICING units under solicitation SPE8EE-26-T-2256, with a response deadline of August 17, 2026, and a delivery requirement of 167 days after award. The item is identified by NSN 4930-01-481-1791 and falls under NAICS code 333914, managed by the Department of Defense through the Construction & Equipment Manu & Con organization. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. The point of contact for inquiries is Philip Ferrara, reachable via email and phone, with performance located at New Cumberland, PA, 17070-5002.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
SUPPORT, SPRING
Solicitation # SPE8EE-26-T-2225
The contract is for the procurement of 31 spring units under solicitation SPE8EE-26-T-2225, with a total small business set-aside classification and a NAICS code of 333914 for other commercial and service machinery manufacturing. The supplier, Alfa Laval Inc DBA Alfa-Laval Separation based in Warminster, PA, must comply with all applicable DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issuance or award date depending on acquisition size. Strict prohibitions against intentional use of mercury or mercury-containing compounds apply to all supplied hardware, with limited exceptions for functional components like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents; any mercury-containing portable lamps or instruments must be shock-proof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. All supplies must be marked per MIL-STD-130N and must not come into direct contact with mercury, and government identification must be removed from non-accepted items. The delivery deadline is 167 days after contract award, with performance location in Tracy, CA, and the contract is managed by the Department of Defense through the DLA. Proposals must be submitted by August 17, 2026, with the solicitation issued on August 5, 2026, and primary point of contact is Philip Ferrara at DLA.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
LUBRICATOR
Solicitation # SPE8EE-26-T-2240
This contract is for the supply of one unit of a lubricator identified by NSN 4930-01-310-8148 and purchase request number 7017758493, issued under solicitation SPE8EE-26-T-2240 by the Defense Logistics Agency. The item must be delivered within 167 days from the contract award, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance are required at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and packaging codes, and marking must adhere to MIL-STD-129 with no special marking required. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the shipment must meet all DLA packaging and transportation guidelines outlined in applicable procedural notes. The item must not contain intentionally added mercury or mercury-containing compounds, except for specific functional uses in batteries, instruments, or sensors as permitted under NAVSEA guidelines, which further require shock-proof containment and secondary barriers for portable devices. The supplier, LUBRIQUIP INC. based in Cleveland, Ohio, is required to comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. These requirements are incorporated by reference and the controlling revision depends on the acquisition type and applicable dates. The contract specifies the use of the DoD-authorized unit of issue and references the ANSI X12 equivalent for procurement purposes. The original required delivery date was December 6, 2026, with a need ship date of February 1, 2027, and the solicitation closed on August 17, 2026. All contractual obligations, including material composition restrictions, packaging, marking, and delivery conditions, are binding under DoD regulations and are subject to compliance enforcement at the point of destination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
REEL ASSEMBLY, HOSE
Solicitation # SPE8EE-26-T-2272
The contract is for the procurement of 38 hose reel assemblies identified by NSN 4930-01-669-2914, classified as a commercial off the shelf item. The solicitation, issued under number SPE8EE-26-T-2272, is a Women-Owned Small Business Set-Aside with a response deadline of August 17, 2026, and a required delivery date 121 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the governing revision. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to Covered Defense Information requirements, and the performance location is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting organization is the Department of Defense, under the Construction & Equipment Manufacture and Construction division, with Philip Ferrara listed as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details