Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Texas was posted on October 1, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Okonite Cable Supply and Related Services

Closed
721-26016State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335931
New
Federal
POWER SUPPLY
Solicitation # N0010426QYAFF
Solicitation N0010426QYAFF is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support for the manufacture and delivery of power supplies, specifically NSN 6130-01-675-9930, following the design represented by Cage Code 1WX10 (MINV-4000-1U-28-1F6S-E00). The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The government retains a unilateral option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt of the initial order at the same price. Technical specifications mandate that the power supplies be mercury-free due to their intended use on submarines and surface ships. Contractors must adhere to strict marking and packaging standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packing. Evaluation of quotations will be based on supplier performance risk via the Supplier Performance Risk System and country of origin, with a preference for U.S.-made or qualifying country end products. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on the manufacturer's letterhead. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with various cybersecurity standards, including DFARS 252.204-7012 and CMMC unique identifier reporting. Inspection and acceptance will occur at the point of origin. The solicitation was amended to extend the quote closing date to October 29, 2026, and to update approved sources.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 3 days
NAICS: 335931
New
Federal
HULL PENETRATOR
Solicitation # N0010426QFA03
This solicitation is for the procurement of Hull Penetrator units (NSN 5935-01-710-6139) for use in crucial shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis Material Level I, requiring stringent control procedures and comprehensive certification. The scope includes the delivery of three units within 365 days, with a strong emphasis on quality assurance, including First Article Testing and strict adherence to Teledyne and EB specifications. The government will make a single award based on technical acceptability, with past performance weighted more heavily than price. Technical requirements mandate the use of QQ-N-286 material for the body, nut, and washer, with specific prohibitions against cold-forming internal threads and the use of molybdenum disulfide lubricants. Extensive testing is required, including non-destructive tests, ultrasonic inspection of starting materials, and dye penetrant inspection. All certification data and test results must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. The contractor is responsible for maintaining total equipment baseline configuration and must submit Engineering Change Proposals for any modifications affecting form, fit, or function. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipments. The contract incorporates various FAR and DFARS clauses, including a one-year warranty on supplies and a three-year warranty on data. Final acceptance is based on a zero-defect policy, with lot rejection triggered by a single defect. All production and repair welding must be performed by qualified personnel and approved procedures, with a strict prohibition on repair welding for QQ-N-286 material.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 7 days
NAICS: 335931
New
Federal
CONNECTOR,PENETRATI
Solicitation # N0010426QFC04
Solicitation N00104-26-Q-FC04, issued by NAVSUP Weapon Systems Support, is a fixed-price request for quotations for the procurement of pressure-proof electrical hull penetrator connector assemblies (NSN 5935-01-455-2734) for the SSN 688 Class Vertical Launch System. Due to the critical nature of these components in shipboard systems, the material is designated as Special Emphasis Material Level I, meaning incorrect or defective parts could result in catastrophic failure, loss of the ship, or loss of life. The procurement requires strict adherence to Electric Boat Specification 3004 and various military standards, including specific requirements for QQ-N-286 and QQ-N-281 materials. The contract mandates a destructive First Article Test (FAT) and approval process, with samples provided separately from the contract quantity. Key technical requirements include dielectric voltage withstanding tests at 1000 VAC, slow strain rate tensile testing at approved laboratories, and rigorous non-destructive testing such as dye penetrant and ultrasonic inspections. All internal threads must be cut rather than cold-formed, and the use of molybdenum disulfide lubricants is strictly prohibited. Quality assurance is managed through a comprehensive Certificate of Compliance and the submission of certification data via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard prior to shipment. Award will be made to the most advantageous offeror based on a primary evaluation of past performance and a secondary evaluation of price. The government utilizes the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risks. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific levels based on the destination. The final submission deadline for offers is November 6, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 14 days
NAICS: 335931
New
Federal
CABLE ASSY,INBOARD
Solicitation # N0010426QFD47
Solicitation N00104-26-Q-FD47, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks firm-fixed-price quotes for the Level 1 repair of an inboard cable assembly (NSN 7HH 5935-01-623-4054). The scope of work requires the teardown, evaluation, inspection, and full refurbishment of the item to like-new or A condition. Due to its use in crucial shipboard systems, the material is designated as Special Emphasis material, necessitating strict quality control, material traceability, and a comprehensive certificate of compliance. The repair process must adhere to specific Naval Sea Systems Command drawings and maintenance standards, including requirements for quantitative chemical and mechanical analysis of specific parts and non-destructive testing. The contract is a DO-rated order for national defense use, with final delivery required within 110 days of the effective date to the Portsmouth Naval Shipyard. Award evaluation will prioritize past performance over price, utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. Technical requirements include strict prohibitions on molybdenum disulfide thread lubricants and specific mandates for internal thread cutting. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129. Offerors must provide a firm-fixed-price quote for the repair, as well as an approximate cost for a new item and a price for items deemed beyond economic repair.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The University of Texas at Austin, through its Utilities and Energy Management department, is seeking proposals from qualified firms to supply Okonite branded cabling of various sizes and types, along with related services such as cabling management, handling, and installation. The contract, identified as RFP 721-26016, is structured as a one-year agreement with the possibility of renewal for up to four additional years, targeting a total contract value between 500,000 and 1.5 million dollars. The procurement emphasizes compliance with specific certifications and legal requirements, including certifications related to Texas Government Codes, antitrust laws, and tax status, which proposers must acknowledge and sign as part of their submission. A key component of the process involves submitting an Electronic HUB Subcontracting Plan aimed at promoting equitable access to contracting opportunities, with a subcontracting goal of 23.7% for professional services. The solicitation details the scope of work, which encompasses the supply of Okonite cables with specifications such as EPR 15KV Okoguard insulation at 220 mils thickness and 133% insulation level, along with installation and management services. The document also includes logistical details, response deadlines set for October 22, 2025, and a pre-proposal meeting scheduled for October 7, 2025. Supporting documents include bid tables with pricing information, which specify unit costs per foot for various cable items, and contractual appendices that outline the terms and conditions, although some of these contractual documents are unreadable or corrupted. Overall, the procurement aims to establish a reliable supply and service relationship for high-quality electrical cabling needs across the university’s facilities in Texas, ensuring compliance with state procurement policies and fostering inclusive contracting practices.

General Info

Place of Performance

TX, USA

Set-Aside

NONE

Documents

5
PDF, High priority: read this first26 pages · rfp
High
PDF, Low priority1 page · other
Low
PDF, Low priority4 pages · other
Low
PDF, Low priority17 pages · contract-document
Low
XLSX, Low priority6 pages · other
Low

Read all 5 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • POWER SUPPLYOpen now, due in 4 days
  • 59--ELEC HULL FITTINGOpen now, due in 22 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyUniversity of Texas
ContactsNo contacts available
OfficeN/A
Organization / AgencyUniversity of Texas
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
The University of Texas at Austin (“UT Austin” or “University”) on behalf of Utilities and Energy Management (“UEM”) seeks proposals from qualified firms to primarily provide Okonite branded cabling of various sizes/types (the “Goods”) plus add-on services related to cabling management, handling and installation (the “Services”).

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS