This Solicitation opportunity from Connecticut was posted on August 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ON-CALL EQUIPMENT AND LABOR RATES FOR CIVIL SITE WORK - Town of Preston

Closed

31931State & Local

Submission Closed09/05/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

SLED

Two (2) 940 Rough Terrain Forklifts

Solicitation # WMATA-0000010949

The Washington Metropolitan Area Transit Authority is soliciting bids for the procurement of two 940 Rough Terrain Forklifts. This solicitation, identified by number WMATA-0000010949, falls under NAICS code 333924 and is managed through the agency's Virginia organization. The solicitation was posted on October 27, 2026, with a strict response deadline of October 30, 2026, at 7:00 PM. Interested parties must submit their responses via the official supplier portal by the specified cutoff date.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

30 Ton Heavy Duty Wrecker

Solicitation # W91QVN27QA001

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Supply, Delivery and Maintenance of Electric Lift Trucks (Forklitfts)

Solicitation # tender_22286

The Ministry of the Solicitor General for the Government of Ontario is seeking a provider for the supply, delivery, and maintenance of three fully electric forklifts: one stand-up reach truck and one sit-down forklift for the Central East Correctional Center, and one sit-down forklift for the Central North Correctional Center. The equipment must be capable of indoor and outdoor operation, featuring a triplex mast, a minimum load capacity of 3,500 pounds, a minimum lift height of 17 feet, 42-inch forks, and both side shift and tilt capabilities. The scope of work extends beyond delivery to include warranty coverage, preventative maintenance, repair services, and technical support to minimize downtime and ensure health and safety compliance. The procurement process follows a four-stage evaluation: a mandatory requirements review, a pass/fail technical data sheet assessment, a scored technical response, and a commercial evaluation based on a relative pricing formula. Bidders must provide a nine-digit CRA business number and certify their business continuity plans, customer satisfaction survey practices, and environmental sustainability initiatives. Delivery is prioritized for the 2026-27 fiscal year, with options ranging from four weeks to a final deadline of March 29, 2027. Successful contractors must adhere to strict occupational health and safety standards, including OHSA compliance, WSIB coverage, and the provision of an accessible emergency evacuation plan.

POSTED

DEADLINE

Heavy-Duty Truck Tractor SupplyThis subcontract, managed by the Department of Defense under the 0411 Aq Hq Contract Augmented agency, requires the supply of 15 brand new 6x4 Truck Tractors for prime contractors working on USFK vehicle procurement projects. The selected provider must ensure all units meet specific physical and performance characteristics and must submit comprehensive technical specifications and manufacturer documentation. A critical requirement of the agreement is the provision of a Vehicle Manufacturer’s Certificate that explicitly designates USFK as the first owner. The contract falls under NAICS code 333924 and mandates the full delivery of all 15 heavy-duty units in accordance with the established guidelines.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Solicitation # W91QVN27RA006

Solicitation W91QVN27RA006 is a firm fixed price, unrestricted contract for the procurement and delivery of 15 brand new 6x4 truck tractors to support the 19th Expeditionary Sustainment Command theater-wide operations. The vehicles must feature a diesel, in-line 6-cylinder engine with approximately 12.7-liter displacement and a 12-speed automated manual transmission. Delivery is scheduled for calendar year 2027, with a performance window from January 1 to December 31, 2027, and must be completed within 240 calendar days of the award or notice to proceed. The delivery is FOB Destination, door-to-door to Camp Humphreys, and requires coordination with the point of contact three working days in advance. This contract is uniquely funded by the Government of the Republic of Korea (ROK), which will pay the contractor directly; no United States appropriated funds are obligated. Invoices must be submitted in five copies and clearly cite MOA Contract - funded by ROK MND. Award will be based on the most advantageous offer, with technical qualifications and price weighted approximately equally. Technical evaluations are pass/fail based on compliance with salient characteristics, while price is reviewed for reasonableness and completeness. Offerors must submit quotations electronically via the PIEE Solicitation Module by November 12, 2026, including a plan to obtain a manufacturer's certificate specifying USFK as the first owner and required Korean contractor certifications.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

3930--Combined Warehouse Forklift With 26' Lift Height

Solicitation # 36C25927Q0031

The Department of Veterans Affairs, Network Contracting Office 19, has issued a Sources Sought Notice for the procurement of a new sit-down rider lift truck and battery for the Oklahoma City VAHCS Warehouse. The primary objective is to acquire equipment capable of reaching a minimum lift height of 26 feet to accommodate higher racking systems in a new warehouse facility. The requirement specifies a Crown Forklift model FC5715-40 or an equal alternative, featuring a minimum load capacity of 4,000 lbs, 36-volt power, and a Vforce VTA battery compatible with the existing Crown Vforce V-HMF3 Series charging station. Additional technical requirements include 36-inch forks, adjustable outriggers, dual AC drives, side shift and forward back tilt capabilities, and integrated brake, backup, and front-mounted work lights. This request is for information and planning purposes and does not constitute a formal solicitation. Interested contractors must submit a capabilities statement and a detailed product description, including the manufacturer's information and estimated delivery time, to Peyton Wilkerson by 15:00 MST on November 9, 2026. Submissions are limited to 8 pages and should be sent via email. The government has identified NAICS code 333924 as the primary classification for this effort, with a small business size standard of 900 employees, though respondents may suggest alternative codes that better represent the scope of work.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Solicitation # W911S227U0082

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0127

Solicitation SPE8EF-27-T-0127 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment Manu and Con for the procurement of 138 platform skids, identified by NSN 3990-01-653-4153 and part number 03159940011. The solicitation was posted on October 26, 2026, with a response deadline of November 5, 2026. This is not a small business set-aside, and all quotes must be submitted through the DLA Internet Bid Board System. The required delivery date is February 27, 2027, with a need ship date of April 12, 2027, delivered FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must provide a complete data package for approved and alternate parts for evaluation. Technical and quality requirements are governed by the DLA Master List, specifically RP001 for packaging and palletization, RA001 for general technical requirements, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, sustainable products, and safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Heavy Equipment Rigging and InstallationThis subcontract for Heavy Equipment Rigging and Installation involves the delivery, unloading, positioning, and installation of a 28-ton Plasma Press/Punch for prime contractors working on Texas Department of Criminal Justice projects. The scope of work requires the use of heavy-lift cranes and rigging gear to transport the machinery, followed by precise leveling and securing the equipment to the facility floor in a designated area. To ensure operational safety and compliance, the contractor must possess valid rigging certifications and strictly adhere to all facility safety protocols. The project is categorized under NAICS code 333924, with a response deadline set for November 6, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Doc5883971531 Supply of Battery Operated Heavy Duty Forklift (2026)

Solicitation # 235245

TransLink, the South Coast British Columbia Transportation Authority, has issued solicitation number 235245 for the supply of battery operated heavy duty forklifts. This procurement process is managed through the Province of British Columbia and requires performance of the contract within British Columbia, Canada. The solicitation was officially posted on October 23, 2026, and interested parties must submit their responses by the deadline of November 12, 2026, at 9:00 PM. Further details and submission guidelines can be accessed via the BC Bid portal.

TransLink(South Coast British Columbia Transportation Authority)

POSTED

DEADLINE

Specialty Wheeled/Towed Equipment SupplyThis subcontract opportunity is for the supply of specialty wheeled and towed power equipment and accessories to support prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of specialized machinery, including towed spreaders, aerators, and other wheeled power equipment, all of which must adhere to standard specifications. The project is based in Boston, Massachusetts, and falls under NAICS code 333924. Interested parties should note that the response deadline for this solicitation is December 18, 2026.

Operational Services Division

POSTED

DEADLINE

Agricultural Tractors & Loaders SupplyThis subcontract agreement focuses on the supply of agricultural tractors, skid steer loaders, and related accessories for prime contractors working on projects for the Commonwealth of Massachusetts Operational Services Division. The scope of work involves the delivery of operational heavy machinery and attachments to various state agencies, with all equipment required to strictly adhere to the RMV Truck Safety Standards. The contract is managed by the Massachusetts Operational Services Division and is centered in Boston. Interested parties must submit their responses by December 18, 2026, to provide the necessary machinery under NAICS code 333924.

Operational Services Division

POSTED

4 days ago

DEADLINE

in about 2 months

AI Contract Overview

The Town of Preston seeks qualified contractors to provide on-call equipment and labor for various civil site work projects, including curbing repairs, roadway construction, and drainage improvements. The contract aims to supplement the town’s workforce with contractors equipped with skilled personnel and appropriate machinery to handle routine tasks during standard working hours, as well as emergency or high-priority work outside regular hours such as nights, weekends, or holidays. Payment terms specify a minimum of four hours per engagement, with additional hours billed at the designated hourly rates, which differ for normal and after-hours work. The solicitation, identified as number 31931, was posted on August 16, 2025, with a response deadline of September 5, 2025. The contract is expected to range between $50,000 and $250,000 and is managed by the Connecticut Department of Administrative Services on behalf of the Town of Preston. Interested contractors can contact Jarred Harris via email or phone for further details and are directed to the Connecticut Bid Portal for additional information. The project falls under NAICS code 333924, emphasizing the provision of industrial truck, trailer, and equipment manufacturing and repair services.

General Info

Agency

Connecticut → Town of Preston

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

CT, USA

Set-Aside

NONE

Documents

Solicitation 31931 - On-Call Equipment and Labor Rates for Civil Sitework, Town of Preston

itb

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedAug 16

Solicitation

Response DeadlineSep 5

Deadline has passed

Submission Closed

09/05/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyConnecticut → Town of Preston

Contacts1 person available

OfficeN/A

Organization / Agency

Connecticut → Town of Preston

Office AddressN/A

Contacts

Jarred Harris

contact@example.gov

+1 (555) 000-0000

Full Description

The Town of Preston routinely has small projects associated with curbing repair, roadway construction, drainage improvements, etc. and we have a need to supplement our workforce with qualified contractors that have both a skilled workforce and appropriate equipment to complete various assignments. The work that may be required under this invitation includes both routine work that would be done during typical work hours (Monday – Friday 7:00am to 5:00pm) and for emergency or high priority work that would need to be done on nights, weekends, or holidays. Hourly rates are to be designated for normal work hours and a separate rate for nights, weekends or holidays. All engagements will be paid as a minimum 4-hours, with each hour thereafter being charged at the normal hourly rate.