This Solicitation opportunity from California was posted on October 1, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

On-Call Surveying Services

Closed

RFP195818State & Local

Submission Closed10/22/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423860

New

Federal

Pre-Solicitation Notice for NSN 5120-00-169-0215

Solicitation # 47QSSC-27-R-0003

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Truck & Trailer Tie Down Equipment

Solicitation # B2728305

Solicitation B2728305 is a fixed-price procurement for Truck and Trailer Tie Down Equipment issued by the City of Philadelphia's Parks and Recreation department. The contract will be awarded to the lowest, responsible, and responsive seller who meets all technical and administrative requirements. The aggregate value of purchase orders issued under this contract shall be less than 45,000 dollars. All products must be delivered FOB Destination Point, and sellers are required to provide the exact items specified unless an acceptable alternate of equal quality and performance is approved by the City. Submission of quotes must be completed electronically via the PHLContracts portal by the December 10, 2026, deadline. A mandatory Consent and Authorization Agreement must be on file for a quote to be considered, while an LGBTQ Applicant Opportunity Data Form may be submitted optionally. Awarded vendors must enroll in the city's electronic deposit system for payment and maintain specific insurance coverages, including 500,000 dollars in general liability and 300,000 dollars in automobile liability, unless providing equipment solely via common carrier. The contract is governed by the laws of the Commonwealth of Pennsylvania and the courts of Philadelphia County.

POSTED

DEADLINE

NRP,SON LNCH DIST V — 1680016443714 — SPRPA127QWA20

Solicitation # SPRPA127QWA20

Solicitation SPRPA127QWA20 is an emergency acquisition issued by the Department of the Navy via the DLA Aviation office in Philadelphia for the procurement of NSN 7RH 1680-01-644-3714 CB, described as NRP, SON LNH DIST V. The requirement specifies a delivery timeline of 90 days with shipping terms set as FOB Destination. Inspection and acceptance will occur at the origin. The government intends to make a single award to a technically acceptable offeror, with the evaluation prioritizing past performance over price. Risk assessments may be conducted using the DoD Supplier Performance Risk System to evaluate item, price, and supplier risks. The contract mandates strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for system stock and MIL-STD-129 for labeling. Specific requirements are outlined for electrostatic discharge protection per ANSI/ESD S20.20-2021 and shelf-life markings, requiring at least 85 percent of the Navy shelf-life to remain upon receipt. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with the Buy American Act and safeguarding covered defense information under DFARS 252.204-7012 is required. Offerors must provide current catalogs or price lists and validate their status in the System for Award Management.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

PROPELLER SHAFT, NONVEH

Solicitation # SPE7L0-27-Q-0028

Solicitation SPE7L0-27-Q-0028 is a request for the procurement of eight nonvehicular propeller shafts, identified by NSN 3040-01-625-0751 and Yamaha Motor Corporation P/N 6CB-45611-00-00. Issued by the DLA Weapons Support Land Supply Chain, the requirement specifies a delivery date of February 6, 2026, with a delivery window of 60 days after order. The items are to be shipped FOB Destination to the Royal Jordanian Engineering Corps in Zarqa, Jordan, with Serra International Inc serving as the freight forwarder. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Payment must be processed electronically via the Wide Area WorkFlow system. This is not a small business set-aside and includes various federal and defense regulations, including Buy American preferences, cybersecurity compliance under DFARS 252.204-7012, and prohibitions regarding Chinese military companies. Offerors must submit quotations using Standard Form 18 by the specified deadline, with the government evaluating the potential use of reconditioned or surplus property.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Marine Safety Gear and Equipment - RFI

Solicitation # 04326 - RFI #2

The Washington Department of Enterprise Services is requesting feedback through RFI #2 regarding the development of Marine Safety Gear and Equipment. This solicitation seeks industry input on safety gear requirements, current market availability, distribution methods, and overall coverage to inform the agency's planning and procurement strategies. Interested parties must submit their responses by November 1, 2026. The scope of performance covers multiple counties within the state of Washington. Primary inquiries and submissions should be directed to David Hallock at the Department of Enterprise Services.

Enterprise Services , Department. of

POSTED

DEADLINE

RFQ-171-270000000015-2 | 472/23129.KMM; Woodland C.F. - Site Mechanical Underground

Solicitation # 472/23129

Solicitation 472/23129.KMM is a project managed by the Michigan Department of Technology, Management and Budget for site mechanical underground work at the Woodland Correctional Facility in Whitmore Lake, Michigan. The scope of work involves updates to the sanitary sewer and water main systems, requiring contractors to handle utility location, hydro excavation, dewatering, and project phasing. Bidders must adhere to specific technical specifications and obtain necessary permits from agencies such as DLARA, MDOT, and EGLE. Due to the secure nature of the Michigan Department of Corrections facility, all personnel requiring access to the secure perimeter must undergo a background check via a LEIN request. The bidding process requires submissions through the SIGMA VSS portal, with a final response deadline of November 18, 2026. Key requirements include proof of State Project Registration and attendance at a mandatory site walk-through. The project incorporates specific guidelines from a geotechnical data report regarding soil conditions and trenchless crossings for water mains. Additionally, the contract includes a material allowance in the bid schedule and mandates compliance with MDOC utility and security shut down standards, as well as responsibilities for restoring areas disturbed during previous construction phases.

POSTED

DEADLINE

FUEL INJECTOR KIT 8000 HR SIEMENS CHARGER LOCOMOTIVE

Solicitation # 2139511

Solicitation 2139511 is a rate order issued by the MTA Metro-North Railroad for the procurement of a Fuel Injector Kit 8000 HR Siemens Charger Locomotive. This procurement falls under the category of transportation commodities and is intended for performance state-wide within New York. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026, at 3:00 PM. The primary point of contact for this requirement is TAA Harrypaul, a Procurement Specialist II. Interested parties can find additional details and contact information via the MTA Vendor Portal. There are currently no specific goals established for Service-Disabled Veteran-Owned Businesses, Minority/Women Business Enterprises, or Disadvantaged Business Enterprises, as all such goals are set at 0.00 percent.

MTA - Metro-north Railroad

POSTED

DEADLINE

Supply and Deliver Lighting Equipment and Accessories for PATH, Manufactured by Luminator Mass Transit, LLC – Two (2) Year Requirements Contract

Solicitation # 2139889

The Port Authority of New York and New Jersey is soliciting bids for a two-year requirements contract, identified by solicitation number 6000003511 and CR number 2139889. The scope of work involves the supply and delivery of lighting equipment and accessories for PATH, specifically those manufactured by Luminator Mass Transit, LLC. These deliverables fall under NIGP Code 55900 for mass transportation rail vehicle parts and accessories. The contract is administered by the Procurement Operations division located at 150 Greenwich Street in New York. Bids must be submitted electronically via Euna by October 28, 2026, at 11:00 AM. In accordance with Title VI of the Civil Rights Act of 1964, the Port Authority ensures full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. No business enterprises have been awarded an identical or substantially similar procurement contract within the past five years. For further assistance or documentation, interested parties may contact the Procurement Support Specialist at [email hidden] or [phone hidden].

The Port Authority of New York and New Jersey

POSTED

DEADLINE

Locomotive Overhaul Kit

Solicitation # 195772A

Metra is soliciting bids under solicitation number 195772A for the procurement of Locomotive Overhaul Kits to support the in-house rehabilitation and modernization of F40PH-3 locomotives. This indefinite quantity contract is established for a five year period with a total value not to exceed 19 million dollars. The award will be granted to the lowest responsive and responsible bidder based on gross individual unit prices or the gross bid total. Key requirements for responsiveness include bidding on all items, providing a signed contract signature page, acknowledging all addenda, and submitting a correctly executed Buy America Certificate for FTA funded procurements exceeding 150,000 dollars. The scope includes the provision of materials and overhaul kits delivered F.O.B. Destination within the Chicagoland Six County Area, specifically to the 47th Street Maintenance Facility. Pricing must be all inclusive of packaging, transport, handling, and remanufactured costs. The contract mandates a one year warranty period and requires compliance with various federal and state regulations, including 49 CFR Part 26 for Disadvantaged Business Enterprises, the Americans with Disabilities Act, and FTA Circular 4220.1G. Bidders must provide notarized non collusion affidavits and certifications regarding debarment and suspension. The successful contractor is responsible for performing all inspection and acceptance testing of items prior to delivery.

POSTED

DEADLINE

Multiple Victoria-Class Spares - Anti- Flash Device, Cooler,Fluid,Industrial, Cartridge,Check Valve, Parts Kit, Fluid Pressure Filter, Valve, Safety Relief

Solicitation # W8482-275589/A

The Department of National Defence is soliciting proposals under solicitation number W8482-275589/A for the procurement of various Victoria-Class spares. The required items include anti-flash devices, industrial fluid coolers, check valve cartridges, fluid pressure filter parts kits, and safety relief valves. These components are to be delivered in equal quantities to CFB Esquimalt and CFB Halifax. All goods must be new and delivered Free Carrier (FCA) per Incoterms 2020. Bids are due by November 9, 2026, at 14:00 EST, with the Department of National Defence reserving the right to negotiate delivery dates around March 31, 2027. The contract mandates strict quality and packaging standards, including specific marking requirements for manufacturer names and part numbers, and the use of PDF417 bar code symbols for unique identification. Certain items require permanent stamping or etching and must adhere to specific shelf-life requirements, ensuring at least 75 percent of the authorized shelf life remains upon delivery. Bidders proposing equivalent or substitute products must provide comprehensive technical specifications and compliance statements to prove full interchangeability. Payment for undisputed invoices will be issued within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Department of State, through the Bureau of International Narcotics and Law Enforcement Affairs, is establishing an Indefinite Delivery, Indefinite Quantity contract for aviation maintenance parts. This initiative is designed to create a more efficient and cost-effective sourcing mechanism for the procurement of aviation parts and related services, with the primary place of performance located in Bogota. Classified under NAICS code 423860, this forecast was posted on September 1, 2026. Jamillah Timmons serves as the primary point of contact, with Tyler Sinclair acting as the Small Business Specialist for the requirement.

BUREAU OF INTERNATIONAL NARCOTICS AND LAW ENFORCEMENT AFFAIRS

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Aviation Maintenance Parts IDIQ is a forecasted contract initiated by the Department of State to establish an Indefinite Delivery, Indefinite Quantity vehicle for aviation parts and services. The primary objective of this procurement is to create a more efficient sourcing mechanism that provides faster and more cost-effective access to essential aviation components. Classified under NAICS code 423860, the contract is designed to streamline the acquisition process for maintenance requirements, ensuring that necessary parts are available to support aviation operations without the delays associated with traditional procurement methods. This forecast was posted on August 20, 2026, and serves as an advance notice for potential industry participants. Interested parties can coordinate with designated points of contact, including Jamillah Timmons and Small Business Specialist Tyler Sinclair, for further inquiries. While specific set-aside details are not currently defined, the initiative represents a strategic effort by the Department of State to optimize its supply chain for aviation maintenance through a flexible and responsive contracting framework.

State, Department Of

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

The contract involves providing on-call surveying services for the City of Palo Alto's Public Works Engineering Services Division, encompassing various work groups such as Streets and Sidewalks, Parks, Buildings, and Storm Drain. The selected consultants will perform topographic surveys to generate accurate base maps necessary for planning and executing infrastructure improvement projects. These surveys include establishing control lines, locating and tying out existing survey markers, and documenting surface features like driveways, curbs, sidewalks, trees, signage, and utilities, including underground infrastructure such as storm drains, water, sewer, gas, electric, and telecommunications utilities. The deliverables require comprehensive CAD files, survey data in CSV format, and detailed reports with layered features, all compliant with NAVD88 standards and utilizing 2023 Civil 3D AutoCAD software. The work must adhere to traffic control regulations, especially during peak hours on arterial and collector streets, with the consultant responsible for implementing MUTCD-compliant traffic management plans for short-term and longer-duration survey activities. The contract, valued between $500,000 and $2,000,000, is open to multiple work orders, with scope, schedule, and budget to be determined as projects develop. The City will provide existing infrastructure and right-of-way information via its GIS system. The selected consultant must coordinate closely with the City, ensuring all survey work minimizes traffic disruptions and complies with safety and traffic control standards. The primary point of contact is Steven Dimter, reachable via email and phone. This contract emphasizes flexibility to support multiple concurrent projects across different City departments, requiring detailed documentation and adherence to specified technical and safety standards.

General Info

Agency

California → Public Works-Engineering Services

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

Place of Performance

CA, USA

Set-Aside

NONE

Documents

City of Palo Alto Insurance Requirements

specifications

High

Cost Proposal Form for RFP195818

1 page · cost-proposal

High

RFP #RFP195818 - On-Call Surveying Services

rfp

High

City of Palo Alto Professional Services Agreement Sample

contract-document

Low

Firm Experience Qualifications Form

past-performance

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedOct 1

Solicitation

Response DeadlineOct 22

Deadline has passed

Submission Closed

10/22/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Public Works-Engineering Services

Contacts1 person available

OfficeN/A

Organization / Agency

California → Public Works-Engineering Services

Office AddressN/A

Contacts

Steven Dimter

contact@example.gov

+1 (555) 000-0000

Full Description

The selected Consultant(s) will be working with various work groups within the Public Works Engineering Services Division including Streets and Sidewalks, Parks, Buildings and Storm Drain. This contract will be open to more than one work group, therefore the consultant may be asked to work on more than one project at a time. All services to be performed by the Consultant(s) shall be documented in a task order to be executed by the Consultant(s) and City. The specified work required for these projects will be determined as the projects are developed including a detailed scope, schedule and budget. Consultant(s) shall provide the City with an hourly rate for Land Surveyor services. Below are descriptions of required tasks for each work group. Streets and Sidewalks, Parks, Building and Storm Drain – Topographic survey services will be used to provide base maps for preparation of plans for proposed improvement projects. The Consultant shall provide the following topographic survey services: Establish survey control line extending 10 feet beyond the limits of workLocate, identify, and tie-out City of Palo Alto survey markers, landmarks, and monuments found within the project areaPerform topographic survey of existing features, which includes but is not limited to the following:Locate and identify existing surface features, which includes but is not limited to the following: driveway areas, top of curb, flow line, any exposed lip of gutter, sidewalk, ramps, edge of pavement, street cross section, centerline, speed humps, traffic striping, signs, walkways in park strips, trees (including diameter), light poles, building corners, top of bank, drainage ditch and other pertinent field featuresLocate and identify existing surface utilities, which includes but is not limited to the following: catch basins, manholes, boxes, valves, water, gas, electric, fiber optics, telecommunications, sewer, and cable television utilities Additional features required for Storm Drain projects include the following: Storm drain infrastructure (pipelines, manholes, and catch basins) including invert elevations, pipe sizes, material type, and rim elevationsOther existing underground utilities (i.e. sewer, water, gas, electric, fiber optics, telecommunications, and cable television utilities) including invert elevations, pipe sizes, material type, top/bottom, pipe elevations, rim elevations, and duct/encasement bottom elevations. Deliverables – prepare and submit the following: Surveys must use NAVD882023 Civil 3D Auto-CAD files for the survey work doneElectronic files (csv format) of all survey data pointsCTB filesComprehensive CAD file of survey and presentable pdf with title block, project information, and key descriptions as feature identifier for each surveyed infrastructureSeparate layers for different topographic featuresProvide line work, profile, and cross-sections utilizing 2023 Auto-CAD Civil 3D The City will provide existing infrastructure and right-of way information from City of Palo Alto Geographic Information System (GIS) Streets. Work on arterial and collector streets (including Alma, Middlefield, and Embarcadero will not be permitted between the hours of 7 a.m. and 9 a.m. and 4 p.m. and 6 p.m. to avoid traffic congestion to the public. Consultant shall be responsible for all traffic control for survey crews. The Consultant shall comply will the MUTCD Rolling/mobile traffic control for short term work. Any work that is longer than 15 minutes at one particular spot shall require a more specific traffic control plan to be submitted for the City’s Transportation Division’s review and approval. Consultant shall be responsible for all traffic control for survey crews.