Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

one (1) isothermal calorimeter with coupled electrochemical control (four (4) channels) and measurements for testing four (4) batteries simultaneously

Closed
W911QX26QA129Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The U.S. Army Contracting Command – APG Adelphi Division is preparing to sole source the procurement of one isothermal calorimeter with coupled electrochemical control, featuring four channels to simultaneously test four batteries, for use by the Battery Science Branch at the Army Research Laboratory in Adelphi, Maryland. The requirement is classified under NAICS code 334516 and PSC code 6625, with no set-asides designated. The government intends to acquire the equipment under FAR Part 12 as a commercial product, and has identified TA INSTRUMENTS – WATERS L.L.C. as the sole responsible source due to its exclusive provision of the TAM IV within the Battery Cycler Microcalorimeter package, which is critical for maintaining experimental continuity and historical data integrity. While the solicitation is structured as a sole source under FAR 6.103-1, any responsible party may submit a capability statement or quotation by the deadline. Responses must be received no later than 3:00 p.m. Eastern Time on July 23, 2026, and should be emailed to Swati Jain at swati.jain2.civ@army.mil. The anticipated award date is August 14, 2026, with delivery required to the ARL facility at 2800 Powder Mill Road, Adelphi, MD 20783-1138. Point of contact for contractual inquiries is Joseph M. Dellinger, with Swati Jain serving as the primary point for submissions.

General Info

Sole source procurement of one four-channel isothermal calorimeter from TA INSTRUMENTS – WATERS L.L.C. for ARL Adelphi, delivery by August 14, 2026.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Adelphi, MD, 20783, USA

Set-Aside

NONE

Documents

(1)

W911QX26QA129 Presolicitation Notice for Isothermal Calorimeter

DOCXpresolicitation

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi
Contacts1 person available
OfficeADELPHI, MD, 20783-1197, USA
Organization / Agency
Department Of Defense → W6QK Acc-Apg Adelphi
View Agency Profile
Office AddressADELPHI, MD, 20783-1197, USA

Full Description

Show more

Presolicitation Notice (FAR 5.101)




1.  Point of Contact:          Joseph M. Dellinger


                                                Contracting Officer


Army Contracting Command - APG


Adelphi Division


2800 Powder Mill Road


Adelphi, MD 20783-1197


joseph.m.dellinger2.civ@army.mil


520-691-4720



2.  Set Asides:                     None



3.  PSC Code:                      6625



4.  NAICS Code:                 334516



5.  Description: 


The Battery Science Branch at the Army Research Laboratory (ARL) requires one (1) isothermal calorimeter with coupled electrochemical control (four (4) channels) and measurements for testing four (4) batteries simultaneously. Delivery is required to ARL facilities in Adelphi, MD, 2800 Powder Mill Rd, Adelphi MD 20783-1138. The following components are required:




6.  This is a notice of intent to sole source, using Simplified Acquisition Procedures.  This notice of intent is not a request for competitive proposals.  However, any responsible source who believes it is capable of meeting the requirement may submit a capability statement, proposal, or quotation, which shall be considered by the agency, only if received by the closing date and time of this notice.  A determination not to compete the proposed requirement based upon the responses to this notice is solely within the discretion of the Government. 




7.  The anticipated award date is 14 August 2026.



8.  All responsible sources may submit a quotation, which will be considered by the agency.



9.  The United States Government intends to solicit and negotiate with only one source under the authority of FAR 6.103-1, Only One Responsible Source. That source is TA INSTRUMENTS -WATERS L.L.C. CAGE CODE 0MJS5, Address: 159 Lukens Drive, New Castle, Delaware 19720-2765, United States. using FAR Part 12 Acquisition of Commercial Products and Commercial Services.  TA INSTRUMENTS is the only known source that provides a complete hardware and software package (TAM IV within the Battery Cycler Microcalorimeter package). Procuring the TA Instruments TAM IV ensures experimental continuity and preserves historical data baselines established by the original equipment.


 



10.  Response Date:  Thursday, 7/23/2026, no later than 3:00pm Eastern Time



Responses to this notice are due on or before 3:00pm Eastern Time on Monday, 7/23/2026 by email to swati.jain2.civ@army.mil

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

NAICS: 333517
New
Federal
Multi-task Milling/Turning Center Machine
Solicitation # W911QX26QA175
The Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking quotes for the procurement of one Multi-task Milling/Turning Center Machine for the DEVCOM Army Research Laboratory at Aberdeen Proving Ground, Maryland. This acquisition is conducted as a combined synopsis-solicitation under FAR Part 12 for commercial items, utilizing NAICS code 333517. The required machinery must meet stringent salient characteristics, including a minimum 25 HP spindle power, 5,000 RPM spindle speed, and high-precision positioning accuracy for the X, B, and C axes. Additional mandatory features include a 60-tool automatic changer, a 1,000 psi high-pressure coolant system, and Capto C6 tooling compatibility. The successful contractor must provide full installation, operator training, a one-year labor warranty, and a two-year CNC control warranty, with final delivery and acceptance required by November 30, 2027. Award will be determined through a trade-off process where price, technical acceptability, and past performance are weighted equally. Technical acceptability is based on a binary assessment of whether the offered machine meets the specified performance characteristics. The government reserves the right to award to a higher-priced offeror if the overall value is deemed more advantageous. Proposals must be submitted electronically to the primary point of contact, Deneise Jackson, by the specified deadline. The contract incorporates various FAR and DFARS clauses, including requirements for cybersecurity reporting under 252.204-7012 and prohibitions on certain telecommunications equipment. Invoicing and payment will be managed through the Wide Area WorkFlow (WAWF) system.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS