This Solicitation opportunity from Ohio was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

OPI 716 - CCV - NON CONTRACT STEEL

Closed

SRC0000039141State & Local

Submission Closed06/03/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331221

New

Federal

Component Supply (Tier 2/3)This subcontract opportunity, titled Component Supply (Tier 2/3), involves the provision of raw materials or standard commercial-off-the-shelf parts to prime contractors supporting US Navy NAVSUP supply contracts. The scope of work focuses on the delivery of raw materials and sub-components, with a strict requirement that all materials originate from domestic sources or qualifying countries. Managed by the Navsup Weapon Systems Support under the Department of Defense, the contract mandates full compliance with the Buy American Act and the Trade Agreements Act, including the submission of required country of origin certifications. Interested parties must respond by November 16, 2026, under NAICS code 331221.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Blind Rivets (NSN 5320015231500)This subcontract involves the supply of blind rivets for prime contractors under the Department of Defense, specifically managed by the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing 1,998 units that strictly adhere to NSN 5320015231500 specifications. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The contract requires delivery FOB Origin within 161 days of the award date. Performance will take place in Jacksonville, Florida, under NAICS code 331221. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Aluminum Alloy Bar StockThis subcontract involves the supply of certified aerospace-grade aluminum alloy bar stock for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The raw materials must meet National Aerospace Standards specifically for rigid tube connector flared tubes and be delivered to Cherry Point. The supplier is required to provide Material Test Reports and Certificates of Conformance to verify that all materials are mercury-free and compliant with the Buy American Act. Interested parties must respond to the solicitation by October 29, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Metal Bars (NSN 9510016649442)This subcontract involves the supply of two precision-manufactured metal bars meeting NSN 9510016649442 specifications for the Defense Logistics Agency. The contractor is responsible for manufacturing or sourcing the materials and ensuring strict adherence to packaging and marking standards, specifically ASTM D3951 for packaging, RP001 for palletization, and MIL-STD-129 for marking. Performance will take place in Mesa, Arizona. Key compliance requirements include adherence to the Buy American Act and the ability to process electronic invoicing through the Wide Area Workflow system. The solicitation was posted on October 18, 2026, with a response deadline of October 29, 2026, under NAICS code 331221.

Defense Logistics Agency

POSTED

DEADLINE

Metal Casting for Safety Relief Valve ComponentsThis subcontract opportunity, managed by the Department of Defense in San Diego, seeks a provider to supply precision metal castings for safety relief valve bodies and internal components. The scope of work involves performing metal casting and providing the necessary tooling to meet the technical specifications for NSN 4820014386552. The selected contractor must utilize industrial foundry equipment to ensure all cast metal valve components and housings adhere to critical application material standards for prime contractors on DLA supply contracts. The procurement is designated as a Total Small Business Set-Aside under NAICS code 331221. Interested parties must submit their responses by October 29, 2026. Performance of the contract will take place in San Diego, California, specifically within the 92136-3581 zip code area.

POSTED

DEADLINE

Supply of Cold Drawn Round Steel Bars (1018 Steel)This subcontract, issued by the Department of Defense through the DDSP New Cumberland Facility, involves the supply of cold drawn round 1018 carbon steel bars. These materials are intended for prime contractors fulfilling DLA Troop Support Construction and Equipment contracts. The required specifications include bars with a 1.000 inch diameter and lengths ranging from 10 to 12 feet, produced using cold-drawing equipment to ensure adherence to AISI 1018 chemical and physical properties. The contractor is responsible for ensuring all products meet strict military and industry standards, specifically performing packaging and preservation according to ASTM A700 codes ZZ and Z, and marking in accordance with MIL-STD-129. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of October 29, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Rim Latches (NSN 5340-01-740-7158)This subcontract involves the manufacture or procurement of 53 specialized aircraft Rim Latches, part number Q1028-K, compliant with NSN 5340-01-740-7158. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, with delivery designated as FOB Origin to DLA Distribution New Cumberland. The supplier must adhere to strict quality assurance and regulatory standards, including sampling per MIL-STD-1916 or ASQ H1331 and compliance with DFARS 252.225-7001. Additionally, all items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 to ensure proper handling and identification.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of 1018 Steel Flat/Square BarsThis subcontract involves the manufacture and supply of precision-cut 1018 steel bars in flat and square forms to support prime contractors fulfilling Department of Defense supply contracts. The required materials must be 0.500 inch thick and 3.000 inch wide, with lengths ranging from 10 to 14 feet. A total of 103 feet of steel bars, identified by NSN 9510005419652, must be produced using precision cutting and milling equipment to ensure strict adherence to DLA material specifications and dimensional tolerances. The contract is managed through the San Diego office of the Department of Defense, with the place of performance located in San Diego, California. Delivery of the materials will be handled via First Destination Transportation. The solicitation was posted on October 18, 2026, with a response deadline set for October 29, 2026, falling under NAICS code 331221.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0120

Solicitation SPE8E4-27-T-0120 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of metal bars. The requirement consists of two line items, each for one unit of metal bar under NSN 9510016649442 and part number 153100. The delivery timeframe is specified as 20 days after order, with an original required delivery date of September 23, 2026. Shipping is designated as FOB Origin, with delivery and inspection points located at destination addresses in Mesa, Arizona. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. The DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment. The procurement falls under NAICS code 331221.

Defense Logistics Agency

POSTED

DEADLINE

STATIC AND LINE HARDWARE FOR ED-FNT STATIC JOBThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of static and line hardware to support the ED-FNT static job. This requirement is categorized under NAICS code 331221 and is designated as a small business set-aside. The project is scheduled for performance in Wisconsin. Interested parties can coordinate with the Small Business Program Managers for further details regarding this acquisition. The forecast was officially posted on October 18, 2026, and is listed as part of the agency's public acquisition planning.

Western Area Power Administration

POSTED

DEADLINE

High-Grade Metal Stock Supply for Hydraulic ManifoldsThis subcontract, titled High-Grade Metal Stock Supply for Hydraulic Manifolds, involves the procurement of raw metal stock such as billets, bars, or castings for prime contractors working on DLA Land and Maritime projects. The selected provider is responsible for sourcing and certifying materials that adhere to NSN 4730014116490 technical specifications and comply with Buy American Act domestic origin requirements. All deliveries must include Mill Test Reports and material certifications meeting ASTM, SAE, or AMS standards. Managed by the Fluid Handling Division of the Department of Defense under NAICS code 331221, the contract requires performance in New Cumberland. The solicitation was posted on October 16, 2026, with a response deadline of October 21, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0109

Solicitation SPE8E9-27-T-0109 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of hot rolled carbon structural steel plates. The requirement consists of two line items for NSN 9515005962442, totaling 52 units of measure (PM), with specific dimensions of 0.250 inches thick, 36 inches wide, and 120 inches long. Delivery is required within 162 days after order, with an original required delivery date of January 24, 2027, and a need ship date of March 28, 2027. Shipments are FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution facilities in Warner Robins, Georgia, and New Cumberland, Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Technical compliance requires adherence to ASTM A36/A36M-19, ASTM A6/A6M-24B, and SAE AMS2807C standards. Contractors must provide a Certificate of Quality Compliance with every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. All units must be identified with the contract delivery order number, NSN, specification, grade, manufacturer details, and dimensions using approved stamping or stenciling methods. Invoicing must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 2 days

AI Contract Overview

The solicitation titled OPI 716 - CCV - NON CONTRACT STEEL with number SRC0000039141 was posted on May 29, 2026, and requires responses by June 3, 2026, at 4:00 PM. It involves the procurement of steel under a non-contract arrangement and is issued by the Drc100000 Operation Support Center Drcros, a state and local government entity. The contract does not specify a set-aside type or NAICS code, indicating it is open to general competition without targeted small business preferences. Performance of the work is required in Ohio, though no specific city or zip code is provided. No point of contact information is listed, and all communication and submission must be completed through the Ohio Buys portal via the provided link.

General Info

Procurement of non-contract steel in Ohio via Ohio Buys portal, responses due June 3, 2026.

Agency

Ohio → Drc100000 Operation Support Center Drcros

NAICS

331221 - Rolled Steel Shape Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedMay 29

Solicitation

Notice updatedMay 29

The notice description changed.

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOhio → Drc100000 Operation Support Center Drcros

ContactsNo contacts available

OfficeN/A

Organization / AgencyOhio → Drc100000 Operation Support Center Drcros

Office AddressN/A

ContactsNo contact information available

Full Description

Steel

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS