Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

OPMPC Shredder Room Compliancy

Active
WS5862836454International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The OPMPC Shredder Room Compliancy project, solicitation number WS5862836454, is a federal construction contract issued by the Department of Public Works and Government Services for work located in the National Capital Region. This opportunity is competed exclusively among qualified holders of the General Contractor and Specialty Trades Supply Arrangement. The project focuses on bringing the existing shredder room UB33 into compliance with current codes through the replacement of the shredder enclosure and dust collector, as well as upgrading electrical and mechanical systems tailored for hazardous environments. The scope of work encompasses all necessary labor, materials, equipment, and supervision to improve ventilation and heating while implementing essential safety controls, interlocks, and emergency systems. Interested parties must submit their responses by the deadline of September 22, 2026. The primary point of contact for this solicitation is Robert Angell, the Contracting Authority.

General Info

Federal construction contract for shredder room compliance and upgrades in National Capital Region.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of Public Works and Government Services
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of Public Works and Government Services
View Agency Profile
Office AddressN/A
Contacts
Angell Robert (SPAC/PSPCContracting Authority

Full Description

Show more
This requirement is being competed exclusively among holders of the General Contractor and Specialty Trades Supply Arrangement (GCSA) who are qualified for the applicable stream. The work generally consists of construction services for the project as described in the solicitation documents, including all labour, materials, equipment, supervision, and related services necessary to complete the required work. If you are interested in becoming a qualified supplier on the GCSA, you can find all related documents at the RFSA General Contractor and Specialty Trades Services - Tender Notice on CanadaBuys. The project involves bringing the existing OPMPC shredder room UB33 into compliance with current code requirements. The work includes replacing the shredder enclosure and dust collector, upgrading the electrical and mechanical systems for the hazardous environment, improving ventilation and heating, and implementing the required safety controls, interlocks, and emergency systems.

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
MAIN GROUNDING ELECTRODE
Solicitation # WL-26-006
Adams and Associates, operating the Woodland Job Corps Center for the U.S. Department of Labor, is soliciting proposals from licensed electrical contractors to inspect and repair main grounding electrode systems in Laurel, Maryland. The scope of work involves correcting improperly sized grounding electrode conductors in the Aspen Dorm, Vocational Building, Willow Hall, Holly Dorm, Maple Dorm, and Oak Dorm, as well as installing a new main grounding electrode in the Administration Building. All work must comply with NEC 2023, 250 standards, EPA, and OSHA regulations. Key technical requirements include the installation of #2/0 AWG conductors, 16x2 inch ground bars, and 8-foot ground rods with specific separation and conduit routing. The solicitation is a set-aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Proposals must be submitted by September 3, 2026, and include a lump sum cost with a detailed breakdown, a timeline for substantial completion, and proof of a valid Maryland contractor's license. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Selected contractors must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. The contract includes a one-year workmanship guarantee and net 30 payment terms. Required documentation for final acceptance includes a completed SF 1413, release of liens, and certified payroll records.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in about 13 hours
View Details
NAICS: 238210
New
PANELBOARDS
Solicitation # WL – 26 -0004
Adams and Associates is soliciting a single lump sum subcontract for electrical panelboard repairs and labeling at the Woodland Job Corps Center in Laurel, Maryland. The primary objective is to correct electrical deficiencies by providing complete, non-handwritten circuit directories for panelboards in the basement mechanical room, first floor food preparation area, dishwasher room, and electrical room. Specific technical requirements include labeling the fire alarm control panel power supply breaker with a UL listed red mark and replacing missing panelboard covers, all in strict accordance with NEC 2023 standards. The project requires a one-year guarantee on workmanship and manufacturer products, with payment terms set at Net 30. Eligible offerors must be small businesses and provide proof of a valid Maryland contractor's license, a W9, and a completed vendor questionnaire. Proposals must include a detailed cost breakdown for labor, materials, and equipment, a timeline for substantial completion, and a 90-day bid guarantee. A mandatory site visit and pre-bid conference are required for eligibility. Award will be based on best value rather than the lowest price. The selected contractor must adhere to EPA and OSHA regulations, comply with Service Contract Labor Standards wage determinations, and maintain specific automobile and workers compensation insurance naming Adams and Associates, Inc. as an additional insured. Work must commence within 14 days of the Notice to Proceed.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in about 13 hours
View Details
NAICS: 238210
New
SLED
Audio Visual Pool Refresh
Solicitation # university-of-washington-1255198
The University of Washington is seeking to establish one or more contracts through solicitation number university-of-washington-1255198 to secure suppliers for audio visual equipment, design, installation, rentals, event services, and maintenance. These services will support a variety of environments including classrooms, lecture halls, historic performance venues, stadiums, and other indoor and outdoor spaces. Eligible firms must be available for work in Washington State and submit all required documentation by the response deadline of October 23, 2026. An optional pre-bid meeting is scheduled for September 18, 2026. The contractual framework incorporates several critical compliance and technical requirements. This includes adherence to IT security terms, a data processing agreement for personal data, and a digital accessibility rider requiring compliance with WCAG 2.2 AA standards. Additionally, projects involving the built environment must comply with an IoT rider covering patch plans, commissioning, and cyber liability insurance. The standard agreement structure typically features a one-year base term with potential extensions up to ten years, utilizing Net 30 payment terms. Specific project components, such as the Alaska Airlines Arena LED Display Systems Modernization, require detailed bid forms covering technical specifications, installation, and extended warranty pricing.
University of Washington

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 238210
New
SLED
Barrier Arm Electrical Power Installation
Solicitation # IFB 2026-028
The Regional Transit Authority of New Orleans is soliciting bids under IFB 2026-028 for the installation of electrical power for security barrier arm operators at the East New Orleans Facility maintenance entrance. The project requires a fixed-price contract to provide all labor, materials, and permits necessary to install a dedicated 120V AC circuit with a 20-amp breaker, utilizing copper conductors and a combination of PVC underground and rigid metal riser conduits. The scope includes approximately 250 linear feet of trenching through grass and across a driveway, with a requirement that the driveway be restored to its original or better condition. The contractor is responsible for providing a project schedule, obtaining all necessary permits, and providing a one-year warranty on labor and workmanship. Notably, the scope is limited to providing power to the control box; the control board, programming, and access control integration will be handled by others. The contract will be awarded to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit a Unit Price Form, Non-Collusion Affidavit, Participant Information Form, and Addendum Acknowledgement by the deadline of October 2, 2026, at 1:00 PM. All work must comply with NFPA and NEC standards, as well as ADA and federal transit accessibility requirements. Payment terms are set at 30 days from the date of an approved invoice. While the RTA maintains a general 32 percent DBE utilization goal for federally funded projects, no specific DBE goal has been established for this project due to the lack of subcontracting opportunities. Bids can be submitted via the RTA procurement portal or delivered physically to 2817 Canal Street, New Orleans, Louisiana.
New Orleans Regional Transit Authority

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Government of Canada → Department of Public Works and Government Services

Same awarding agency

NAICS: 336413
New
International
MINERVA Initiative – Uncrewed Air System for Cargo/Munition Drop
Solicitation # EN578-24ISC4/96
The MINERVA Initiative is a challenge issued by the Department of National Defence to develop a domestically produced uncrewed aircraft system for the aerial delivery of cargo and munitions. The goal is to provide the Canadian Army with a rugged, simple, and survivable alternative to ballistic trajectory weapons for moving supplies and munitions to the frontline. This solicitation is specifically open for Phase 2 prototype development, targeting solutions with a technology readiness level between 5 and 9. The required system must include an air vehicle, sensor payload, ground control station, radio, battery with charger, and a remote antenna. Mandatory technical specifications include a minimum payload capacity of 5kg, a maximum takeoff weight of 25kg, vertical take-off and landing capability within 2 square meters, and the ability to operate in temperatures ranging from -20C to +40C. The system must have an operational radius of 10km and an endurance of 30 minutes. Funding for Phase 2 is capped at 500,000 CAD per contract with a project duration of up to 15 months, and approximately five contracts are expected to be awarded. Proposals must be submitted by October 5, 2026. Additionally, the government emphasizes the importance of a domestic industrial base, requiring detailed sourcing information for critical components to ensure they originate from NATO allies or partners.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details