This Solicitation opportunity from Department Of Defense was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

OSCILLATOR SUBASSEMBLY

Closed

SPE7M1-26-U-4506Federal

Submission Closed08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334419

New

DIBBS

Manufacturing of Probe-Lead Assembly, Test

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7LX-26-T-1117

Solicitation SPE7LX-26-T-1117 is a Request for Quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 97 units of Jack-Support Shoes (NSN 4940-01-678-9226). This is a total small business set-aside under NAICS 334419, with a specific preference for JLTVCI Small Business Prime Contract holders. The procurement requires adherence to multiple technical drawings and quality standards, including the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin with a delivery period of 168 days, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award decisions will be based on fair and reasonable pricing, quality, and delivery terms, with the potential to convert to a FAR Part 13 Simplified Acquisition if initial pricing is not found to be fair and reasonable.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-455B

Solicitation SPE7M5-26-T-455B, issued by DLA Land and Maritime Active Devices Division, is a request for quotations for four linear microcircuits, identified by NSN 5962012477674 and part number HI1-5047A/883 from Renesas Electronics America Inc. The procurement is for a critical application item and is categorized as a commercial item. Delivery is required within 143 days, with a need ship date of February 2, 2027, and a final required delivery date of July 1, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The contract imposes stringent quality and technical requirements, including CMMC Level 2 self-assessment and strict supply chain traceability. Contractors must provide DLA Land and Maritime Form 918 and associated traceability or test reports at least 15 days prior to the delivery date to receive shipping authorization. Packaging must adhere to MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, with specific cushioning requirements per A-A-59136 to prevent lead damage. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware and must comply with the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal by September 11, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

5995-01-480-6389; VMM; LAV, ANTI-TANK

Solicitation # SPE4A627R0003

This is an other than full and open solicitation issued by DLA Aviation to establish a five-year long-term infinite quantity contract for a specific cable assembly, NSN 5995-01-480-6389. The requirement is strictly limited to offers proposing Celltron, Inc. part number 3219750-1. The contract falls under NAICS code 334419 and features an estimated annual demand of 121 units, with a required delivery window of 200 days to various facilities within the Continental United States. The procurement process may involve a reverse auction via the Procurex system, and proposals must be submitted directly to the bid custodian rather than through DIBBS. The solicitation is tentatively scheduled for release on September 28, 2065, with terms set as FOB Origin and Inspection/Acceptance Destination for DLA Direct.

POSTED

DEADLINE

Solicitation # SPE7M1-26-U-6084

Solicitation SPE7M1-26-U-6084 is a request for quotations issued by DLA Land and Maritime for the procurement of crystals under NSN 5955011719812. This procurement is a Total Small Business Set-Aside under NAICS code 334419 and may result in a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 37 units, with a guaranteed minimum quantity of 5. Quotes must be submitted electronically by September 25, 2026, and the award will be based on the price quoted for the estimated annual demand and the responsibility of the offeror. Deliveries are to be made within the continental United States with a delivery period of 102 days. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and safeguarding covered defense information.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6632

Solicitation SPE7M8-26-T-6632 is a fixed-price request for quotations issued by the DLA Land and Maritime Electrical Devices Division for the procurement of nine sensitive switches, identified by NSN 5930012641728. This requirement is designated as a critical application item and specifies approved sources as Safran Power USA, LLC (P/N HH-1000-2) and Sensata Technologies, Inc. (P/N 10AT446-1). The procurement is a total small business set-aside under NAICS 334419, with quotes due electronically via the DIBBS portal by September 21, 2026. The items are to be delivered to the DLA Distribution Depot Oklahoma with a delivery period of 330 days and a need ship date of August 18, 2027. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 or commercial packaging per ASTM D3951 for non-hazardous items. Award may be automated and will be made to an acceptable timely offer, with a price evaluation preference for HUBZone concerns. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Passive Integrated Transponder (PIT) Tags for Catfish

Solicitation # 12SAD226Q0008

Usda/rd/strategic Acquisition Division 2

POSTED

DEADLINE

49--ADAPTER,CYLINDER COMPR

Solicitation # SPE7M1-26-U-6082

Solicitation SPE7M1-26-U-6082 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of eight Cylinder Compression Tester Adapters (NSN 4910007957961). This is a source-controlled drawing item with approved sources 05083 70-0300 and 1T973 8743025. The procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The guaranteed minimum quantity is one unit, with an estimated annual order of one. Quotes must be submitted electronically via the DLA Internet Bid Board System by September 25, 2026. Award may be automated, with evaluation based on the price quoted for estimated annual demand and a preference for HUBZone concerns. Delivery is required within 83 days after the order is placed, with shipping terms set as FOB Origin to various CONUS and OCONUS DLA Depots. Inspection and acceptance will occur at the destination. The contract requires compliance with NAICS code 334419 and incorporates various FAR and DFARS clauses, including those for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

59--OSCILLATOR,NONCRYST, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBA16

This solicitation from Navsup Weapon Systems Support seeks a contractor to perform the repair, overhaul, and testing of non-crystal oscillators (NSN 5955014262653, Part Number 459525) to return them to a Ready For Issue condition. The work must be performed in accordance with the latest approved methods and publications, with all activities subject to the terms of Basic Ordering Agreement N00383-26-G-0017. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, and must maintain a quality management system compliant with ISO 9001 or SAE AS9100. Key contractual provisions include specific protocols for identifying items that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contract mandates strict adherence to configuration management and prohibits part cannibalization without specific approval. The response deadline for this requirement has been extended to October 13, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010426QUC09

This solicitation from the Navsup Weapon Systems Support Mech is for the procurement or repair of a Gun Recoil Compressor. The contract requires the awardee to be an authorized source, with distributors providing official OEM authorization. It specifies a firm-fixed price and, in the case of repair services, a requested turnaround time of 180 days. Failure to meet this turnaround time may result in a price reduction via a reconciliation modification. Key requirements include adherence to MIL-STD packaging and IUID standards per DFARS 252.211-7003. The contract is issued bilaterally, requiring written acceptance from the contractor. All quotes and certifications must be submitted electronically to the designated point of contact. The scope also includes strict quality assurance protocols, government source inspection, and specific guidelines for reporting design or part number changes.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-270S

Solicitation SPE7MC-26-T-270S is a request for quotations issued by DLA Land and Maritime for the procurement of 31 sensitive switches under NSN 5930012856539. The procurement is categorized under NAICS 334419 and requires the items to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. Approved sources for this item include 35795 50008P0X9, 35795 6046-C-13, and 35795 N50008P0X9. The contract specifies that preservation and packaging must adhere to the latest revision of MIL-DTL-28786, with marking following MIL-STD-129 and packaging data governed by MIL-STD-2073-1E. Inspection and acceptance will take place at the destination. Payment and invoicing must be processed through the Wide Area Workflow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and includes various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessment standards. Delivery is expected by February 9, 2027, with an original required delivery date of December 31, 2028.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 9 days

AI Contract Overview

The contract pertains to the procurement of 14 oscillator subassemblies with NSN 5955-00-188-7043 under solicitation SPE7M1-26-U-4506, issued by the Defense Logistics Agency through the Maritime Supply Chain organization. Delivery is required within 84 days of award, with all items to be shipped FOB destination to locations specified in individual delivery orders. The contract is an indefinite-delivery, indefinite-quantity type with a maximum value of $350,000 and a guaranteed minimum order of two units. The item is classified as electrostatic discharge and electromagnetic sensitive, requiring full compliance with MIL-PRF-81705 Type I or Type III barrier packaging per MIL-STD-2073-1E, with preservation method GX mandatory. All handling, packaging, and processing must occur at approved ESD workstations using materials and procedures aligned with MIL-HDBK-773 and MIL-HDBK-263, with no deviations permitted. Components must be marked with serial numbers per MIL-STD-129, and hazardous material labeling must adhere to 29 CFR 1910.1200. Mercury and mercury compounds are strictly prohibited in packaging or preservation. Sampling for acceptance must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance occurs at destination, and contractors must comply with the latest DLA Master List of Technical and Quality Requirements referenced by R numbers. Cybersecurity requirements include CMMC Level 2 self-assessment and full adherence to FAR 252.204-7012 for safeguarding covered defense information, supplemented by NIST SP 800-171 DOD assessment requirements. The contractor must use direct manufacturer sources, with alternate sources qualifying under design control procedures. Invoicing is exclusively through WAWF, and all submissions must be electronic via DIBBS by the August 6, 2026 deadline. The item is associated with classified military platforms including the F-111, A-10, F-16, and AGM-86B missile, and

General Info

Procure 14 ESD-sensitive Oscillator Subassemblies per MIL standards for high-priority systems, with zero defects, CMMC Level 2, and DLA compliance.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-U-4506 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 22

Combined Synopsis

Type ChangedJul 22

Combined Synopsis → Solicitation

Response DeadlineAug 6

Deadline has passed

Submission Closed

08/06/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressUSA

Contacts

Bryan Fair

contact@example.gov

+1 (555) 000-0000

Full Description

OSCILLATOR SUBASSEMBLY
OSCILLATOR SUBASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"MOST CRITICAL" WEAPON SYSTEMS ESSENTIALITY
CODE.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment NHA: AN/ALQ-101 PECULIAR END ITEMS: AIRCRAFT, F-111 (FMS ONLY). AIRCRAFT, THUNDERBOLT II, A-10. AIRCRAFT, F-16. MISSILE, AIR LAUNCH CRUISE (ACLM) AGM-86B. NO SHELF LIFE REQMT.
QUALIFICATION, 1ST ART & PRODUCTION ACCEPTANCE SHALL BE IAW MIL PRF 55310D AND SOURCE CONTROL DRAWING.
ITEM IS ELECTRO STATIC SENSITIVE. DRAWING INDICATES ITEM IS CLASSIFIED AS AN ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE. >>PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING PROCEDURES SHALL BE USED TO PREVENT DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND OTHER ENVIRONMENTAL FIELD FORCES.<< --------------------------------------------
SPE7M1-26-U-4506
SECTION B
ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
OPENED AT AN APPROVED ESD WORKSTATION -ORFIELD
SERVICE KIT. FOR FURTHER INFORMATION, CONSULT
MIL-HDBK-773.
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-E-17555, FOR ELECTRONIC EQUIPMENT.
..
WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL
"A" PRESERVATION AS CITED IN THE COMMODITY
SPECIFICATION.
ACQUIRE DIRECT FROM MANUFACTURER.
ALTERNATE SOURCE MUST QUALIFY IAW DESIGN
CONTROL ACTIVITY'S PROCEDURES.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5955-00-188-7043 Quantity: 14 EA Purchase Request: 1000237739QTY: 14 Delivery: 84 days ADO