Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Overhead Doors

Active

W911S226U4003Federal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Overhead Doors, identified by solicitation number W911S226U4003, is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a combined solicitation with a North American Industry Classification System code of 332321, indicating it pertains to the manufacture of overhead doors. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. The place of performance is listed with a zip code of 74501, though no specific city or state is provided for the delivery location. Primary point of contact for inquiries is Mike Fabry, reachable via email at mike.j.fabry.civ@army.mil or by phone at 918-420-6580. All proposals must be submitted through the SAM.gov portal linked in the solicitation.

General Info

Department of Defense solicits overhead door manufacturing via SAM.gov, due August 17, 2026, contact Mike Fabry.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

1 C Tree Rd McAlester Ok MCAAP, NY, 74501

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 10

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

MIKE FABRY

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Overhead Doors

Similar Contracts

Same NAICS industry code

Supply of Utility Access Door (NSN 5340-01-721-3492)

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

DOOR, ACCESS, UTILITY

Solicitation # SPE7L1-26-Q-1479

This contract solicits three units of a door, access, utility item identified by NSN 5340-01-721-3492 under a firm fixed price structure, with delivery required within 165 days of award to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be manufactured in strict compliance with the basic drawing NR 53711 8541937 Revision M dated 11/12/2025 and reference drawing NR 53711 8541936 Revision C dated 05/23/2022, as defined under TDP Rev A Gen 2. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Manufacturing must conform to ISO 9001:2015, and inspection and acceptance occur at the origin, with sampling based on MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. Acceptable quality levels are set at 0.1 for critical, 1.0 for major, and 4.0 for minor attributes, with unspecified characteristics treated as major. Packaging and marking must follow MIL-STD-129 and MIL-STD-130N, with hazardous materials packaged per TQ IP025 and non-hazardous materials per ASTM D3951 unless overridden by DLA master requirements. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The contract mandates strict adherence to export control regulations under ITAR or EAR, with technical data restricted to suppliers possessing an approved US/Canada Joint Certification Program (JCP) certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have been formally approved by DLA to access controlled data. Covered Defense Information applies, requiring compliance with Cybersecurity Maturity Model Certification Level 2 via self-assessment and a certified third-party assessment organization. Mercury and mercury-containing compounds are prohibited except in specific functional components such as batteries, instrumentation, and weapon systems, which must be shock-proof with secondary containment. Class I ozone-depleting chemicals are absolutely forbidden and override all conflicting specification provisions; any substitute chemicals require prior approval. The contract

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Roofing Metal Sheets Supply

Region 9: Emergency Preparedness An

POSTED

about 22 hours ago

DEADLINE

in about 19 hours

Supply of SUEX Aluminum Transport Box Frame (STD Design 72007)

Naval Surface Warfare Center

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U4002

The contract titled Overhead Door, identified by solicitation number W911S226U4002, is a small business set aside under the SBA program, specifically reserved entirely for small businesses. It is classified under NAICS code 332321, which corresponds to the manufacturing of metal doors and windows, indicating the procurement involves overhead door systems likely for military or government facilities. The opportunity was posted on August 10, 2026, with a firm response deadline of August 17, 2026, and is structured as a combined solicitation, suggesting it may integrate requirements from multiple procurement methods or funding sources. The contracting activity is managed by the Department of Defense through the W6QM Micc-Ft Drum office located at Fort Drum, New York, with a place of performance referenced by ZIP code 74501, which corresponds to Tinker Air Force Base in Oklahoma, implying the doors may be required for installations or infrastructure in that region. Primary point of contact for inquiries is Mike Fabry, reachable via phone at 918-420-6580 or email at mike.j.fabry.civ@army.mil, and further details can be accessed through the SAM.gov platform using the provided UI link.

W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U4012

The contract titled Entry doors solicits bids under solicitation number W911S26U4012, with a posted date of August 10, 2026, and a response deadline of August 17, 2026. It is a combined opportunity designated as a Small Business Set Aside, meaning only qualifying small businesses may compete for this contract. The North American Industry Classification System code 332321 identifies it as pertaining to manufacturing related to doors and windows, specifically focusing on entry doors. The awarding organization is the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a performance location tied to zip code 74501. Mike Fabry serves as the primary point of contact and can be reached via email at mike.j.fabry.civ@army.mil or by phone at 9184206580. Interested parties must submit their proposals by the stated deadline to be considered for award under this limited competition set aside for small businesses.

W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

Precision Machined Hardware Supply – Clevis, Rod End

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Metal Bracket FabricationThe contract requires the manufacture of precision metal mounting brackets to military specifications, with strict adherence to MIL-STD-130N for identification marking and full compliance through first article testing. Work must be performed at a designated location in Tracy, California, with a zip code of 95304-5000, and is classified under NAICS code 332321 for precision forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the contract type is designated as a subcontract, indicating it is part of a larger procurement effort under the Department of Defense’s LAND SUPPLY CHAIN organization. All deliverables must meet exacting military standards for quality, traceability, and durability, and the contractor is expected to provide full documentation and certification to verify conformance prior to acceptance.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Manufacturing of Structural Aircraft PanelsThe contract pertains to the precision manufacturing of structural aircraft panels in strict accordance with military specifications, encompassing all stages from material sourcing to final assembly. This includes machining, forming, and quality-controlled fabrication processes aligned with aerospace technical data requirements and quality standards to ensure airworthiness and performance under operational conditions. All work must be executed with rigorous compliance to defense-grade protocols and documented to meet traceability and inspection mandates. The contract is classified as a subcontract under NAICS code 332321 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is mandated at Robins Air Force Base with a ZIP code of 31098-1887. The solicitation was posted on August 9, 2026, with a firm response deadline of August 17, 2026. No set-aside classification is specified, and the contract is open to qualified subcontractors capable of fulfilling the complex technical demands of military-grade aircraft component production. All submissions must be processed through the designated DIBBS portal.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Custom Sheet Metal Fabrication for Military ContainersA subcontract opportunity exists for the custom fabrication of sheet metal components intended for use in military-spec shipping and storage containers. The work falls under NAICS code 332321, which pertains to sheet metal work, and is being managed under the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026. This is a subcontracting opportunity under a larger federal procurement, and while no set-aside classification is specified, it is exclusively available to potential subcontractors seeking to supply specialized metal components to support military logistics and containment systems. The opportunity is accessible via the DIBBS portal through the provided link.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PIN-RIVET Supply (NSN 5320017135604)The contract secures the supply of three units of PIN-RIVET identified by NSN 5320017135604, with strict adherence to military specifications governing form, fit, function, packaging, marking, and full traceability to ensure compatibility and reliability in defense applications. Delivery is structured under FOB origin terms, meaning ownership and risk transfer to the buyer upon release from the contractor’s facility, with all inspection and acceptance procedures to be conducted at the contractor’s location prior to shipment. The solicitation is a subcontract under the NAICS code 332321, managed by the ASC Commodities Division of the Department of Defense, with the place of performance designated as Cherry Point, NC, 28533-5040. The opportunity was posted on August 9, 2026, with a firm response deadline of August 17, 2026, and is accessible via the DIBBS portal for qualified subcontractors seeking to fulfill this defense-related procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Vehicle Suspension Skirting PlatesThe contract calls for the fabrication of 30 military-spec skirting plates for vehicle suspension systems, encompassing all stages from material forming and machining to final finishing, inspection, and packaging. Each component must strictly adhere to military standards including MIL-STD-129 for labeling and MIL-STD-2073-1E for packaging and preservation, with an enforced requirement for zero non-conformance sampling to ensure zero defects in every unit delivered. The work is classified as a subcontract under NAICS code 332321 and is issued by the Department of Defense through LSO Combat Vehicles and Armament, with a response deadline of August 24, 2026, and the solicitation posted on August 9, 2026. The place of performance and point of contact details are not specified, but compliance with all technical and procedural requirements is mandatory for award consideration.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Solicitation # W911S226U3976

This mobile command trailer is a fully custom-built, in-house assembled unit designed for emergency response and operational coordination, featuring a triple-axle bumper pull chassis with a 33-foot length. The trailer includes a front communications room with five workstations, each equipped with duplex outlets and ethernet connections, alongside custom cabinets and overhead storage. Additional workstations and an electrical cabinet are positioned on the driver side for optimal efficiency, while one workstation is integrated with controls for the 8 to 30 ft. Wil-Burt pneumatic mast at the front, which supports a high-performance PTZ camera and is managed via a pneumatic air pump with Nycoil conduit for wire management. The rear section houses a dedicated conference room with a central table, six ergonomic chairs, oversized whiteboards, and a second entrance door for direct access. A false back wall separates the trailer from a secure generator compartment, with access doors leading to the electrical panel and overhead storage. Two 42-inch TVs, one on the front wall and one in the conference room, provide real-time video feeds from the PTZ camera and support laptop connectivity. Exterior features include seven scene lights for nighttime visibility and an 18-foot electric awning spanning the two passenger-side doors to create a covered outdoor workspace. The trailer was procured under a Small Business Set Aside contract with the U.S. Department of Defense, issued by the Office at Fort Drum, New York, under solicitation number W911S226U3976. The NAICS code 336214 indicates classification within the Motor Vehicle Body and Trailer Manufacturing industry. The contract, posted on August 10, 2026, required responses by August 12, 2026, and is designated as a total small business set aside, meaning only qualified small businesses are eligible to compete. The primary point of contact is Andre Bishop, whose details are listed for inquiries. The place of performance is identified with a ZIP code of 73503, indicating delivery or operational deployment to a location in Oklahoma. The trailer's design, production, and integration were completed entirely by the contractor’s in-house team, from chassis fabrication to final equipment installation, ensuring compliance with rigorous operational standards for mission-critical environments.

Travel Trailer and Camper Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3898

The contract solicitation titled STEEL BAR under solicitation number W911S226U3898 is a combined action issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under NAICS code 331110 which corresponds to Steel Mill and Steel Product Manufacturing. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026, at 9:00 PM Eastern Time. The primary point of contact for inquiries is Cindy Jepsen, reachable via email at cindy.k.jepsen.civ@army.mil or phone at 309-782-8389. The place of performance is listed with a zip code of 61299, though specific city and state details are not provided. This solicitation specifically updates the length of the steel bar and the quantity requested, indicating prior requirements have been modified to reflect current procurement needs.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3980

The contract specifies the procurement of a Bobcat Toolcat UW56 or an equal model featuring a 61-horsepower turbo diesel engine and an operating weight between 5,800 and 6,000 pounds. It requires a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive with limited slip differentials, and an all-wheel steer system. The machine must include a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction features, front windshield wipers, an AM/FM radio with weather band, a backup camera, horn, exterior side mirrors, and a keyless start system. Operational and safety requirements include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, warning beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel capacity. The hydraulic system must deliver auxiliary hydraulics at 18 gallons per minute and high-flow hydraulics at 27 gallons per minute, with pressure-relieved remotes and a 7-pin electric attachment kit. Joystick controls, a skid steer-style coupler, and a hydraulic quick-change system are mandatory. Equipment must include a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower compatible with high-flow hydraulics, a hydraulic dump box rated for a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The delivery must include all operational and service manuals, a scannable unique identification label, on-site operator training, and delivery to Fort Drum, New York. This is a Small Business Set Aside solicitation under NAICS code 339999, issued by the Department of Defense, with bids due by August 14, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3990

The U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum, is seeking qualified small businesses to supply an Oil Filter Crusher under a combined solicitation with the number W911S226U3990. This opportunity is exclusively reserved for small businesses under the SBA Small Business Set Aside - Total category, with the NAICS code 333618 indicating the contract falls under Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 76544, though no specific city or state is provided. The primary point of contact for inquiries is Rachel Rosenbaum, reachable by phone at 254-287-0304 or email at rachel.r.rosenbaum.civ@army.mil. The contract’s official details and submission portal can be accessed via the SAM.gov link associated with the opportunity.

Other Engine Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3965

The contract involves the procurement of GEM electric passenger vehicles with a seating capacity of six, specifically amended to update the NAICS code to 336999, which classifies it under other transportation equipment manufacturing. The solicitation number is W911S226U3965, posted on August 10, 2026, with a response deadline of August 14, 2026, at 10:00 PM Eastern Time. This is a combined solicitation under a Small Business Set Aside, fully reserved for small businesses, as administered by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. The place of performance is indicated with a zip code of 10996, though the specific city and state are not provided. The primary point of contact is Paul Maxwell, reachable via email at paul.maxwell@westpoint.edu or by phone at 845-938-2845, and the full details can be accessed through the SAM.gov workspace link provided.

All Other Transportation Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Trailer Lite Check Tool

Solicitation # W911S226U4010

The Trailer Lite Check Tool solicitation, identified by number W911S226U4010, is a combined contract opportunity issued by the Department of Defense through the Office at Fort Drum, New York, with a NAICS code of 339999 indicating it falls under Other Miscellaneous Manufacturing. This procurement is exclusively reserved for small businesses as a total small business set aside, ensuring only eligible small entities can compete. The solicitation was posted on August 10, 2026, with a strict response deadline of August 17, 2026, at 5:10 p.m. Eastern Time, requiring all proposals to be submitted before then to be considered. The place of performance is listed with a zip code of 54656, though the specific city and state are not provided, suggesting delivery or performance may occur at a location within that zip region. Troy Boardman serves as the primary point of contact, reachable via email at troy.a.boardman.civ@army.mil or by phone at 502-898-0312, and is the designated individual for inquiries related to the requirement. The full solicitation details can be accessed through the official SAM.gov portal using the provided UI link.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Hilti threaded anchor bolts and epoxy

Solicitation # W911S226U4001

The contract solicitation W911S226U4001 seeks Hilti threaded anchor bolts and epoxy products under a Small Business Set Aside for total participation, as defined by the SBA, with the NAICS code 332722 indicating a focus on structural metal fabrication. Issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, the opportunity is open to small businesses and requires responses by August 17, 2026, with the solicitation posted on August 10, 2026. The place of performance is listed with a zip code of 74501, suggesting delivery or installation may occur at a specific military installation or facility in that region. Mike Fabry serves as the primary point of contact, reachable via email and phone for inquiries regarding specifications, requirements, or submission procedures. The combined nature of the solicitation indicates the contract may include both procurement and potential service elements related to the installation or application of the specified anchors and epoxy systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3986

The contract is for baseball caps under solicitation number W911S26U3986, with a response deadline of August 14, 2026, at 8:15 PM Eastern Time, and was posted on August 10, 2026. It is a combined solicitation reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 315990 indicating apparel accessories manufacturing. The awarding organization is the Department of Defense, specifically the Office W6QM Micc-Ft Drum located at Fort Drum, New York, 13602-5220, and the point of contact is Shirley Link, reachable via email at shirley.link.civ@army.mil or phone at 334-255-0985. The place of performance is identified with a zip code of 36362, though no specific city or state is provided. The contract duration has been amended to allow a seven-day timeframe for fulfillment.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 22 hours ago

DEADLINE

Wireless Column Lifts

Solicitation # W911S226U4009

The contract for Wireless Column Lifts under solicitation number W911S26U4009 is a Small Business Set Aside targeting small businesses for the procurement of specialized lifting equipment. Issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, the opportunity is classified under NAICS code 333517, which pertains to other engine equipment manufacturing. The solicitation was posted on August 10, 2026, with a firm response deadline of August 17, 2026, at 6:05 p.m. Eastern Time, and is structured as a combined solicitation indicating it may include both solicitation and award actions. The place of performance is designated with a ZIP code of 54656, though the specific city and state are not provided. Troy Boardman serves as the primary point of contact, reachable via email or phone, for inquiries and submissions related to this procurement. The full solicitation details and submission portal can be accessed through the SAM.gov workspace link provided.

Machine Tool Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # W911S226U3994

The contract seeks dining room furniture under solicitation number W911S26U3994, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a postal code of 13602-5220. The opportunity is posted as a combined solicitation with a response deadline of August 17, 2026, at 8:35 PM Eastern Time. The North American Industry Classification System code 423210 identifies the procurement as related to furniture merchant wholesalers. The place of performance is designated with a zip code of 73503, indicating delivery or installation may occur in Oklahoma. David Green is listed as the primary point of contact, reachable via email at david.e.green.civ@army.mil or by phone at 580-442-1896. No specific set-aside type is assigned, meaning the procurement is open to all eligible vendors without restriction based on small business, veteran-owned, or other socioeconomic categories. The contract opportunity can be accessed through the SAM.gov portal using the provided UI link.

Furniture Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Aerosol Can Disposal System

Solicitation # W911S226U3992

The U.S. Army is seeking solutions for an Aerosol Can Disposal System through a combined solicitation issued under the Small Business Set Aside program, exclusively available to small businesses. The contract, identified by solicitation number W911S226U3992, was posted on August 10, 2026, with responses due by August 17, 2026, at 3:00 p.m. Eastern Time. The North American Industry Classification System code 333912 indicates this procurement is for industrial machinery and equipment manufacturing, specifically targeting innovative systems designed for the safe and compliant disposal of aerosol cans. The contracting activity is managed by the W6QM Micc-Ft Drum office, part of the Department of Defense, located in Fort Drum, New York, with performance expected to take place at a location with zip code 76544, suggesting a potential deployment or operational site in Texas. Rachel Rosenbaum serves as the primary point of contact, reachable via email and phone for inquiries related to the solicitation, and interested parties can access additional details through the official SAM.gov workspace link provided.

Air and Gas Compressor Manufacturing

POSTED

about 22 hours ago

DEADLINE