Toolcat

The contract specifies the procurement of a Bobcat Toolcat UW56 or an equal model featuring a 61-horsepower turbo diesel engine and an operating weight between 5,800 and 6,000 pounds. It requires a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive with limited slip differentials, and an all-wheel steer system. The machine must include a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction features, front windshield wipers, an AM/FM radio with weather band, a backup camera, horn, exterior side mirrors, and a keyless start system. Operational and safety requirements include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, warning beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel capacity. The hydraulic system must deliver auxiliary hydraulics at 18 gallons per minute and high-flow hydraulics at 27 gallons per minute, with pressure-relieved remotes and a 7-pin electric attachment kit. Joystick controls, a skid steer-style coupler, and a hydraulic quick-change system are mandatory. Equipment must include a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower compatible with high-flow hydraulics, a hydraulic dump box rated for a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The delivery must include all operational and service manuals, a scannable unique identification label, on-site operator training, and delivery to Fort Drum, New York. This is a Small Business Set Aside solicitation under NAICS code 339999, issued by the Department of Defense, with bids due by August 14, 2026.