Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Packaging, Labeling, and Hazard Communication Compliance Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with MIL-STD-129 standards for packaging and labeling of actuators intended for military shipment, ensuring all items are properly marked with Data Matrix barcodes for accurate tracking and inventory management. Additionally, the provider must supply OSHA-compliant hazard communication documentation, including material safety data sheets, to ensure proper handling and safety protocols are followed throughout the supply chain. All work must adhere to strict federal and military regulations, with attention to detail in labeling, documentation, and packaging integrity to meet defense logistics requirements. This is a total small business set-aside subcontract under NAICS code 541380, issued by the Department of Defense through the Warner Robins office, with performance expected at Robins AFB, Georgia, 31098-1887. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. Only small businesses are eligible to bid, and the contract emphasizes regulatory adherence and operational precision in support of military logistics operations.

General Info

Small business subcontract for MIL-STD-129 packaging, Data Matrix labels, OSHA docs, compliance at Robins AFB.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide MIL-STD-129 compliant packaging and labeling, including Data Matrix barcoding and OSHA-compliant hazard communication documentation (MSDS) for military shipment of actuators.

Similar Contracts

Same NAICS industry code

NAICS: 541380
New
DIBBS
Radioactive Materials Notification (If Applicable)The contract mandates radiological screening of filter assemblies to detect and notify the government if any radioactive materials exceed established regulatory thresholds, in full compliance with FAR 52.223-7 and MIL-STD-129 requirements. All filter assemblies must be inspected and documented to ensure they do not contain radioactive contaminants above permissible levels, and any discovery of such materials must trigger an immediate and formal notification to the contracting agency. This requirement applies to all deliveries under the subcontract and is intended to safeguard personnel, facilities, and the supply chain from potential radiological hazards. The solicitation is classified as a subcontract under NAICS code 541380 and is administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at San Diego, CA 92135-5000. Responses must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026. While no set-aside designation is specified, the contract emphasizes strict adherence to federal and military standards for radiological safety, and all participants must be prepared to provide verifiable testing documentation and notification protocols as part of compliance. No point of contact is listed, and all inquiries must be directed through the official DIBBS platform linked in the solicitation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
DIBBS
Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with the Occupational Safety and Health Administration’s Hazard Communication Standard and the military specification MIL-STD-129 for all hazardous materials used in Department of Defense shipments. The work must ensure accurate, legible, and standardized labeling and documentation to meet federal safety and military logistics requirements, particularly for items shipped to the designated performance location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Compliance with these standards is critical to safeguard personnel, enable proper handling during transport, and meet regulatory obligations for the transportation of dangerous goods. This subcontract is issued by the Fluid Handling Division under the Department of Defense and is open for response until July 31, 2026, with the solicitation posted on July 28, 2026. The North American Industry Classification System code 541380 indicates the scope involves scientific and technical consulting services related to safety and regulatory compliance. Bidders must be prepared to deliver certified materials and documentation that align with both civilian and military standards without exception, and all work must be performed in strict adherence to the technical and procedural guidelines outlined by the contracting authority.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 332911
New
DIBBS
Small Business Prime Contractor (Set-Aside Opportunity)A total small business set-aside solicitation has been issued by the Department of Defense through the Warner Robins office for a prime contractor role focused on managing the sourcing, compliance, delivery, and invoicing of a hydraulic-pneumatic actuator. This opportunity is restricted exclusively to small businesses under the SBA’s Total Small Business Set-Aside program as defined by FAR 19.5, ensuring that only eligible small business entities may submit proposals. The North American Industry Classification System code for this requirement is 332911, indicating the work involves the manufacture of other fabricated metal products, specifically aligned with actuator production and supply chain management. The place of performance is specified as Robins AFB, Georgia, 31098-1887, and all activities must be conducted in compliance with federal procurement regulations governing subcontracting, delivery timelines, and financial reporting. Proposals must be submitted by the deadline of August 10, 2026, at 5:00 PM, with the solicitation posted on July 28, 2026. While the solicitation number is not provided, the official portal for submission and further details is the DIBBS system via the provided web link. The contract type is classified as a subcontract, meaning the winning small business will act as the prime contractor responsible for end-to-end oversight of the actuator supply chain including vendor selection, quality assurance, scheduling, and accurate invoicing. Failure to meet compliance standards, delivery schedules, or small business eligibility requirements will result in disqualification. Contractors must be prepared to demonstrate full adherence to federal contracting obligations and maintain all necessary certifications throughout the performance period.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIALThis contract specifies the procurement of a nonmetallic shaped section in gray, identified by NSN 9390-00-163-1209 and part number LS32373-1, with a quantity of 40 units measured in linear feet. The item is designated as a commercial item and classified as a critical application item, subject to stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The product must conform to specified technical data packages referenced to drawings 98897 LS32373, 98897 STM23-402, and 98752 200415485, and must be packaged in accordance with DLA Packaging Requirements for Procurement RP001 and MIL-STD-129 labeling standards, with nonhazardous material adhering to ASTM D3951 unless superseded by DLA requirements. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from nonaccepted supplies. The contract mandates delivery FOB origin within 119 days, with inspection and acceptance occurring at the destination, and no variance permitted in quantity. The designated delivery point is DLA Distribution Warner Robins at Robins AFB, Georgia, with a need ship date of April 27, 2026, and an original required delivery date of August 7, 2026. Packaging must comply with the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3721, issued under NAICS code 327999, with primary point of contact Alexis Canalichio, and responses are due by August 10, 2026.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METALThe contract specifies the procurement of three aluminum alloy alclad metal sheets, each 0.063 inches thick, 48 inches wide, and 144 inches long, weighing approximately 43.545 pounds per sheet, with strict adherence to dimensional tolerances and no tolerance for test coupons. The material must conform to SAE AMS4100G Revision G dated January 1, 2024, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper of T761 and alloy designation of 7475, as defined in the Technical Data Package. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution, potentially resulting in criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Contracting Officer. Continuous identification markings are required on each sheet, including the DLA contract number, NSN, specification revision, alloy, grade, manufacturer, heat and lot number, and exact dimensions, applied via stamping or stenciling in legible, waterproof, non-contaminating ink. Materials must be shipped in whole-foot lengths only with packaging strictly following MIL-STD-2073-1E, Level A requirements under ASTM B660, and MIL-STD-129R for labeling, including robust edge and corner protection and full surface coverage with fiberboard or equivalent material. Deliveries are due within 30 days after award date, shipped FOB origin to Warner Robins AFB, GA, with inspection and acceptance occurring at destination under a firm fixed price with zero quantity variance. Government identification must be removed from non-accepted supplies, and all documentation must be submitted in accordance with CDRL-METALSCERT requirements as referenced in the DLA Master List of Technical and Quality Requirements.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 3 hours
View Details
NAICS: 325520
New
DIBBS
PRIMER, SEALING COMPOUNThis contract is for the procurement of primer and sealing compound, a solventless product based on methacrylic ester monomers and organic peroxide, intended for use with anaerobic acrylic threadlocking and retaining compounds. The item is identified by NSN 8030-01-388-5605 and must be furnished in 1 fluid ounce bottles, with a total quantity of 33 ounces required. The product has a non-extendable shelf life of 12 months and must be stored and shipped within a temperature range of 46°F to 70°F, kept out of direct sunlight. Compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandatory, including the inclusion of lot or batch numbers and the special marking code 32 to denote Type I shelf-life classification. Packaging must adhere to DLA-specific requirements, including RP001 for palletization and IP025 for hazardous materials handling, with intermediate packaging limited to no more than 25 units per corrugated fiberboard box under Uniform Freight Classification standards. The product is classified as hazardous under OSHA's Hazard Communication Standard, requiring suppliers to submit Safety Data Sheets (SDS) compliant with 29 CFR 1910.1200, along with HCS-compliant labels, and to train employees on these requirements. Delivery is FOB destination to Robins Air Force Base, Georgia, with a required delivery timeline of 32 days from award, and no tolerance is permitted for quantity variance. The contract utilizes the Defense Logistics Agency's authorized unit of issue, and all shipments must include complete government-compliant markings and documentation. The solicitation is issued under SPE8ES-26-T-2418 and falls under Simplified Acquisition Procedures, with award potentially made automatically. Mandatory FAR and DFARS clauses govern compliance with cybersecurity (252.204-7012), hazardous materials handling (52.223-3), small business representations, employment eligibility, trafficking in persons, and sustainable procurement. Payment must be processed through Wide Area WorkFlow (WAWF), and acceptance occurs at the destination upon inspection by government personnel using referenced technical and quality standards from the DLA Master List.
Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC ANGLEThe contract is for the procurement of 14 units of NONMETALLIC ANGLE, identified by NSN 9390-01-212-3827, with performance required under drawing LS34297 and specifications based on MIL-DTL-5015. The material for parts D-2000 and D-15199 is DACRON, and all parts must be identified per MIL-STD-130. The drawing must be interpreted in accordance with ANSI Y14.5M-82. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, within or outside the U.S., with DFARS 252.225-7048 governing access. Only DLA contractors with approved JCP certification, completed export control training, and DLA authorization may access the controlled data. Delivery is scheduled for 141 days ADO, with FOB ORIGIN terms placing transportation risk and costs on the contractor until the goods are loaded at the origin point. Final delivery must be made to SW3119, DLA Distribution Warner Robins, at Robins AFB, GA 31098-1887, where inspection and acceptance by the government will occur. Packaging and labeling must comply with MIL-STD-129 for marking and barcoding, and MIL-STD-130 for part identification, while hazardous materials require adherence to FED-STD-313, TQ IP025, and the OSHA Hazard Communication Standard. Non-hazardous materials follow ASTM D3951 unless overridden by the DLA Master List. Invoices and receiving reports must be submitted electronically through WAWF per DFARS clauses 252.232-7003 and 252.232-7006. Cybersecurity compliance is mandated under 252.204-7012 and 252.240-7997, requiring implementation of NIST SP 800-171 safeguards and submission to DoD cybersecurity assessments. The contract prohibits acquisition of covered telecommunications equipment from Chinese military companies under 252.204-7018 and mandates compliance with multiple other FAR
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
BAR, METALThe contract specifies the procurement of extruded aluminum alloy 7075 in T6 temper, formatted as flat bar with a thickness of 2.500 inches, width of 4.000 inches, and lengths between 10 and 12 feet in whole-foot increments only, with a reference weight of 12.100 pounds per foot. The material must fully comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This procurement is subject to the Qualified Suppliers List for Distributors requirement, limiting eligibility to suppliers explicitly listed on the QSLD; any deviation must be clearly indicated, and non-compliance may result in rejection, penalties, or criminal liability. Source inspection is waived for QSLD-compliant suppliers, and CDRL-METALSCERT certification is mandatory. Packaging must adhere to MIL-STD-2073-1E with preservation per ASTM B660 and marking per MIL-STD-129. The items are to be delivered FOB origin in 135 days, with a total quantity of 68 feet at $68.00 per foot under solicitation SPE8E4-26-T-1930. A 10% quantity variance is permitted. Critical application status applies, and delivery is to Robins AFB, Georgia, with a required ship date of December 21, 2026, and original delivery due January 3, 2027. All shipments must include dual-unit markings when applicable, and palletization must follow DLA packaging requirements.
Nonferrous Forging

POSTED

2 days ago

DEADLINE

in 9 days
View Details