Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging, Preservation, and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of comprehensive packaging, preservation, and labeling services for hand pumps in accordance with military standards, ensuring all items meet stringent requirements for durability, environmental protection, and safety during storage and transport. This includes full compliance with hazardous materials regulations and the mandatory application of DLR labeling to ensure proper identification and traceability throughout the defense logistics chain. The work is classified as a subcontract under NAICS code 385110 and is issued by the Department of Defense through SPRMM1 DLA Mechanicsburg, with performance expected to align with federal defense directives regardless of geographic location. The solicitation was posted on May 4, 2026, and while specific details like place of performance and point of contact are not listed, the emphasis is on strict adherence to military specifications and supply chain integrity.

General Info

Provide military-compliant packaging, labeling, and preservation of hand pumps with DLR tags per defense standards.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

385110

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126FS501.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPRMM126FS501

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide full packaging, preservation, and labeling services for hand pumps per military standards, including hazardous materials compliance and DLR labeling.

Similar Contracts

Same NAICS industry code

Military Packaging and Preservation ServicesThis subcontract for Military Packaging and Preservation Services is issued by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is the packaging and preservation of defense items in strict accordance with MIL-STD-2073-1E, specifically emphasizing preservation method 33 and necessary drying requirements. The contract is categorized under NAICS code 385110 and was posted on August 17, 2026. It serves as a specialized service agreement to ensure that military equipment is properly protected and maintained during storage and transport according to established defense standards.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Marking, and Preservation ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on providing specialized packaging, marking, and preservation services for cable assemblies. The scope of work requires strict adherence to military standards, specifically including cleaning and drying per Method 10, the use of E5 containers, and the application of MIL-STD-129 labels to ensure full compliance with defense logistics requirements. Classified under NAICS code 385110, the agreement was posted on August 17, 2026. The primary objective is to ensure that all cable assemblies are properly preserved and identified for military use, maintaining the integrity of the components through standardized packaging and marking protocols.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation & Labeling ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the provision of military-compliant packaging, preservation, and labeling services for fasteners. The scope of work requires the use of desiccants, volatile corrosion inhibitors, and moisture barriers to ensure all materials meet strict DLA standards for protection and transport. Classified under NAICS code 385110, the agreement ensures that critical hardware components are preserved against environmental degradation. The contract was posted on August 17, 2026, and is managed through the Defense Logistics Agency's procurement systems to maintain readiness and quality control for military supply chains.

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Preservation ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the packaging and preservation of panel lights. The scope of work requires adherence to military specifications, specifically utilizing preservation method code 10 and the application of fragile labeling to ensure the integrity of the components during transport. The contract is categorized under NAICS code 385110 and was posted on August 17, 2026. It is managed as a subcontract for specialized packaging services to meet rigorous defense standards for equipment preservation.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation & Marking ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on providing military-grade packaging, preservation, and labeling services for defense hardware. The scope of work includes specialized corrosion protection, vacuum sealing, and the application of Unique Identification marking to ensure compliance with PID and MIL-STD requirements. Classified under NAICS code 385110, the contract ensures that critical defense components are properly preserved and identified for logistics and deployment. The agreement is managed through the Defense Logistics Agency to maintain rigorous quality and safety standards for hardware handling.

Defense Logistics Agency

POSTED

DEADLINE

Military Packaging and Marking ServicesThis subcontract for Military Packaging and Marking Services is issued by the Defense Logistics Agency under the Department of Defense. The primary scope of work involves the packaging, preservation, and marking of shipments to ensure full compliance with MIL-STD-129 and MIL-STD-2073-I standards for DLA delivery, which includes the application of proper military property identification. The contract is categorized under NAICS code 385110 and was posted on August 17, 2026. It establishes the technical requirements for preparing shipments to meet rigorous military specifications for transport and identification.

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Preservation ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the provision of military-compliant packaging, unitization, marking, and preservation services. The primary objective is to ensure that all materials meet specific DLA and federal standards for transport and storage, operating under NAICS code 385110. The agreement was posted on August 17, 2026, and is structured to support the logistical requirements of the agency. Detailed award information and tracking can be managed through the DIBBS system under the specified contract identifiers.

Defense Logistics Agency

POSTED

DEADLINE

DoD-Compliant Packaging, Labeling, and Marking ServicesThis subcontract with the Defense Logistics Agency involves providing specialized packaging, preservation, labeling, and bar-coding services for the shipment of lamps. All services must be performed in strict accordance with MIL-STD-129 standards to ensure full compliance with Department of Defense defense shipment requirements. The contract falls under NAICS code 385110 and was posted on August 17, 2026. It is managed by the Department of Defense to ensure that all materials are properly marked and preserved for secure transport and logistics.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Labeling, and Preservation ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the provision of specialized packaging, labeling, and preservation services for fasteners. The contractor is responsible for ensuring all materials are handled according to strict military standards, specifically adhering to MIL-STD-2073-I5E for preservation methods such as the use of desiccants and Volatile Corrosion Inhibitors, and MIL-STD-129 for all labeling requirements. The project falls under NAICS code 385110 and was posted on August 17, 2026. The primary objective is to maintain the integrity and military compliance of fastener components through professional preservation and standardized identification processes to support Department of Defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Marking Compliance ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on providing packaging, preservation, and marking services for military supplies. The primary objective is to ensure all deliverables are fully compliant with MIL-STD-129 standards, with a specific emphasis on implementing effective moisture and corrosion protection to maintain equipment integrity. The services fall under NAICS code 385110 and were posted on August 17, 2026. This agreement ensures that military supplies are properly prepared for transport and storage according to strict federal specifications to prevent damage and ensure accurate identification.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Component Packaging and Documentation Services

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on providing specialized packaging, preservation, and marking services for coating compound shipments. The contractor is responsible for ensuring all shipments are military-compliant, which includes the application of TCN and NSN labeling and the use of corrosion inhibitors in accordance with established referenced standards. The project falls under NAICS code 385110 and is managed through the Defense Logistics Agency. Key operational requirements center on strict adherence to military packaging protocols to ensure the integrity and traceability of materials during transport and storage.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Chain Hoist Manufacturer/Supplier

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63, issued by DLA Mechanicsburg, is a request for quotations for two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This procurement is designated as a high-priority requirement to support a US Navy CASREP due to mission-essential equipment breakdown. The delivery is required as soon as possible on an FOB Destination basis, with the primary shipment destination being the USS John P Murtha LPD 26. The contractor must ensure all items are new and unused, adhering to strict packaging and marking standards including MIL-STD-2073, MIL-STD-129, and MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and evidence of product traceability. The solicitation is not a small business set-aside, and the evaluation will be conducted based on the criteria for part-numbered items.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 16 hours ago

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH36

This fixed-price solicitation from DLA Mechanicsburg is for the manufacture and supply of a pressure transmitter, specifically referencing Cage Code 81349 and part number PGT-GP-100-G2. The contract requires the item to be listed on Qualified Products List 24212, and award evaluations will be based on Lowest Price Technically Acceptable criteria. Contractors must provide an informal cost breakdown to determine fair pricing and must identify the Original Equipment Manufacturer if they are not the manufacturer themselves. Key administrative requirements include the mandatory use of Wide Area Workflow for combined invoice and receiving reports and CMMC Level 1 self-certification for cybersecurity. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. The government mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a fee to cover administrative costs. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 16 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG67

This solicitation is for the manufacture and procurement of a circuit card assembly, identified by CAGE code 3SDB5 and reference number 937E343G1. The contract is issued by the Defense Logistics Agency (DLA) Mechanicsburg and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The current deadline for the submission of quotes has been extended to October 13, 2026. Key requirements include adherence to ISO9001 quality standards, MIL-STD-130 for physical identification, and MIL-STD 2073 for packaging. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. Additionally, authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

in about 1 month

PUMP UNIT,CENTRIFUG

Solicitation # SPRMM126RMC71

This solicitation, issued by DLA Weapons Support Mechanicsburg, is for the manufacture and procurement of a Centrifugal Pump Unit, identified by NSN 4320-012274925 and part number 5773203-24. The requirement specifies that the unit must meet the design and performance standards of drawing 5773203-24 from the Naval Sea Systems Command (CAGE 53711). The procurement is a fixed-price effort utilizing Lowest Price Technically Acceptable (LPTA) criteria for award evaluations. Key quality requirements include higher level inspection, with source inspection required at the manufacturing facility, and physical identification in accordance with MIL-STD-130. The solicitation has undergone several amendments, including the incorporation of Emergency Acquisition Flexibilities, the dissolution of the small business set-aside, and an increase in quantity with the addition of CLIN 0001AC. The final deadline for the receipt of proposals was established as September 15, 2026, at 4:00 pm EST. Contractors are required to submit invoices and receiving reports via the PIEE-WAWF system. Additionally, any offeror who is not the original equipment manufacturer must identify the OEM and their CAGE code. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

SERVER,AUTOMATIC DA

Solicitation # SPRMM126QKB48

This solicitation is for the manufacture and procurement of the Server, Automatic DA, identified by part number F109656-C and Cage Code 1BEK6. The contract is issued by the Department of Defense via DLA Mechanicsburg under SEPA-EAF authority. Key requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD 2073 for packaging. Because the item is intended for use on submarines or surface ships, it must be entirely free of metallic mercury contamination. The procurement process requires electronic submission of invoices and receiving reports through PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. The current deadline for quote submissions is September 29, 2026. Vendors are encouraged to provide quantity price breaks and must provide proof of authorized distribution if they are not the manufacturer. All contractual documents are considered issued when sent via mail, facsimile, or electronic commerce methods.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Military Standard Marking and Packaging

Marking Device Manufacturing

POSTED

DEADLINE

Oxygen System Component Cleaning Services

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacturing of Cylinder Assembly, A

POSTED

DEADLINE

Material Traceability and Compliance Auditor

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Centrifugal Pump Supplier (OEM or Authorized Distributor)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

SHELL AY(PRT SIDE)

Solicitation # SPRMM126QGE59

Solicitation SPRMM126QGE59, issued by DLA Mechanicsburg, seeks quotes for the manufacture and supply of a Shell Assembly (Port Side), identified by NIIN 016409626. Following Amendment 0002, the requirement has been updated to part number 484478 and Technical Data Package (TDP) Version 003. The procurement is unrestricted and requires the delivery of new, unused materials that conform to ISO 9001 quality standards. A critical technical requirement is that all materials must be mercury-free to prevent corrosion and toxicity risks on submarines and surface ships. The contract mandates strict adherence to MIL-STD-129 for physical identification and Item Unique Identification (IUID) requirements. Packaging must comply with MIL-STD-2073-1 for stock shipments, with specific levels designated for domestic and overseas delivery. Inspection and final acceptance will occur at the contractor's or subcontractor's plant. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number. All invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) system. The current deadline for the submission of quotes is September 30, 2026.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS