Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging, Preservation, and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract obligates the contractor to provide military-compliant packaging, preservation, and labeling services for tie-down hardware, adhering strictly to defense standards. All materials must be mercury-free and undergo clean and dry preservation to ensure long-term integrity and environmental compliance. Each unit must be labeled with Data Matrix symbols and conform to MIL-STD-129 requirements for standardized military tagging and tracking. The work supports the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 332992 for other fabricated metal product manufacturing. The contract is structured as a subcontract with no set-aside designation and was posted on July 16, 2026, with performance expected to meet rigorous defense logistics protocols.

General Info

Contractor provides mercury-free, MIL-STD-129 compliant packaging and labeling for tie-down hardware under DLA.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332992 - Small Arms Ammunition ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-25-R-0572.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIE DOWN, CARGO, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Military-compliant packaging, preservation, and labeling of tie-down hardware including clean/dry preservation, mercury-free materials, Data Matrix symbols, and MIL-STD-129 markings.

Similar Contracts

Same NAICS industry code

9mm Training Full Metal Jacket Ammunition Supply

Criminal Investigation

POSTED

about 23 hours ago

DEADLINE

9mm Service Full-size Bonded Ammunition Supply

Criminal Investigation

POSTED

about 23 hours ago

DEADLINE

Ammunition for the Arkansas Army National Guard Marksmanship Training Unit

Solicitation # W803D80012486139

The Department of Defense, specifically the W7MW Uspfo Activity Ar Arng, is seeking a firm-fixed-price purchase order for ammunition to support the Arkansas Army National Guard Marksmanship Training Unit. The requirement consists of three specific items: 10,000 rounds of Hornady 55gr TAP .223, 1,000 rounds of 9mm 150gr Federal Syntech, and 15,000 rounds of Hornady 75gr BTHP .223. This opportunity, identified by solicitation number W803D80012486139, is designated as a total set-aside for small businesses under NAICS code 332992. The place of performance is located in North Little Rock, Arkansas. Interested parties must submit their responses by the deadline of September 11, 2026.

W7MW Uspfo Activity Ar Arng

POSTED

about 23 hours ago

DEADLINE

Ammunition Program

Solicitation # 231043

The Department of the Treasury's Criminal Investigation office is soliciting an Indefinite Delivery Indefinite Quantity (IDIQ) contract under solicitation number 231043 for the procurement of various ammunition types for official duty and training. The contract is structured with a base year and four subsequent option years, with deliveries distributed across the Northern, Southern, and Western District Field Offices (DFO). The required ammunition includes 9mm pistol rounds in bonded, full metal jacket, reduced lead, and frangible varieties, as well as .223 Remington/5.56 rifle ammunition in official duty and training specifications. Specific packaging requirements are mandated for 5.56 NATO full metal jacket training ammunition, which must be provided in 20 round cartridge boxes or on stripper clips. Award evaluation is based on the Total Evaluated Price (TEP), with established or negotiated unit rates incorporated into the IDIQ award. While order unit pricing cannot exceed these established IDIQ rates, vendors are highly encouraged to provide additional discounts at the order level. The procurement is categorized under NAICS code 332992 and is open to all qualified vendors as no set-aside has been applied. The primary point of contact for this effort is Jose Munoz, and the response deadline is September 8, 2026.

Criminal Investigation

POSTED

about 23 hours ago

DEADLINE

9MM BBR Training Ammunition Procurement

Solicitation # 70LCHE26QPFB00002

Solicitation 70LCHE26QPFB00002 is a request for a firm-fixed-price quote for the procurement of 9mm Battlefield Blank Round (BBR) training ammunition for the Department of Homeland Security, specifically the Federal Law Enforcement Training Centers (FLETC). The requirement consists of four cases of 1,000 rounds each, totaling 4,000 rounds. The specified product is UTM 9mm BBR, SKU 01-3090, with a required noise level of 148 dB and a 20-inch standoff distance. No substitutions or equivalent products are permitted. The contract is a total small business set-aside under NAICS code 332992. Delivery is FOB Destination to the FLETC facility in Cheltenham, Maryland, with a preference for delivery in the first quarter of FY27. Award will be based on the lowest-priced technically acceptable offer. Interested vendors must be actively registered in SAM.gov and provide their Unique Entity Identifier and CAGE code with their submission. Quotes are due by September 4, 2026, at 2:00 PM EST and should be submitted via email to the primary point of contact, Chris Dills.

Fletc Procurement Cheltenham Office

POSTED

DEADLINE

in about 8 hours

Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead

Solicitation # W15QKN-26-X-1CFG

The U.S. Army Contracting Command-Rock Island at Picatinny, acting for the Office of the Project Manager, Close Combat Systems, is conducting market research through a sources sought notice for solicitation W15QKN-26-X-1CFG. The government aims to identify capable sources to produce the Shank 2.0 payload, training warheads, and pre-packed anti-personnel warheads designed for use on small Unmanned Aerial System platforms. Additionally, the agency is seeking industry feedback to improve the Technical Data Package for better producibility. This opportunity falls under NAICS code 332992 and is managed by the Department of Defense with performance located at Picatinny Arsenal, New Jersey. There is currently no set-aside specified for this requirement. Interested parties must submit their responses by the deadline of October 1, 2026. Primary coordination for this effort is handled by Yolie M. Davila and Michael W. Arena.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

140R4026Q0154 - SRFTC SIM AMMUNITION AND PPE

Solicitation # 140R4026Q0152

Solicitation 140R4026Q0152 is a combined synopsis and request for quotation issued by the Department of the Interior's Bureau of Reclamation for the purchase of non-lethal training ammunition and personal protective equipment. The requirement is for the SRF Training Center in Grand Coulee, Washington, to support a nine-week academy and in-service training. Specifically, the government is seeking brand-name Ultimate Training Munitions (UTM) products, including 5.56mm and 9mm man marking rounds and battlefield blank rounds, as well as high-cut helmets and groin protectors or equivalent alternatives. This procurement is a total small business set-aside under NAICS code 332992. Quotes must be submitted via email to Aaron Valdez by September 8, 2026, at 11:00 PM Mountain Daylight Time. The government will award the contract based on a best-value trade-off, evaluating technical acceptability and total price. Delivery is requested within 120 days after the award, with terms set as FOB Destination to the Grand Coulee Power Office. Selected contractors must use the Invoice Processing Platform (IPP) for electronic invoicing and obtain a signature of acceptance from the Technical Point of Contact prior to submission. All quotes must remain firm for 60 calendar days.

Denver Federal Center

POSTED

DEADLINE

Supply of WSM6+ Omni 1k

POSTED

DEADLINE

Supply of NSN 5310015770048 (Precision Fastener Component)This subcontract involves the procurement and delivery of 50 units of NSN 5310015770048, which is a precision hardware fastener component such as a bolt, nut, or washer. The items must strictly adhere to military specifications and packaging standards to ensure operational compliance. This requirement is managed by the Department of Defense under the Land Supply Chain agency. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332992. The solicitation was posted on August 30, 2026, with a response deadline set for September 14, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Tactical Firearms and Weapon Systems Supply

FBI - Redstone Arsenal

POSTED

DEADLINE

Dead Air CT5 Suppressor Assembly Supply and Integration

Csa East 6 Usda-Fs

POSTED

DEADLINE

Precision Manufacturing of MK 46 Torpedo Vane, LargeThis subcontract involves the precision manufacturing of the Large Vane component for the MK 46 Torpedo, strictly adhering to technical drawing 2526581. The project requires high-level fabrication that meets rigorous military quality standards and material stability requirements to ensure operational reliability. Managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, the contract falls under NAICS code 332992. The solicitation was posted on August 28, 2026, with a response deadline set for September 28, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE8E6-26-T-4517

This contract, identified as SPE8E6-26-T-4517, is a solicitation issued by the Defense Logistics Agency for the procurement of one decal, part number 02088 from Tru-Hitch, Inc., under NSN 7690016704146. The delivery is required within five days after receipt of the order, with an original required delivery date of September 2, 2026. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The order must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. The item is to be shipped to the USALRCTR at Fort Buchanan, Puerto Rico. All government identification must be removed from any non-accepted supplies as per requirement RQ011.

Commercial Printing (except Screen and Books)

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE8E6-26-Q-0670

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of two units of item 7690-01-703-5648, identified as a label from Intelligent Manufacturing Solutions. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 90 days after the order is placed. Inspection and acceptance are both set at the destination, with shipping handled as FOB Origin. The items must be delivered to the Det Ord Maint Co, 4th Maint Bn 4CRR in Ayer, Massachusetts, using traceable shipping methods rather than parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001 and quality requirements RA001 and RQ011. The solicitation is managed by Kathleen Selover and is associated with solicitation number SPE8E6-26-Q-0670.

Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

BATTERY POWER SUPPLY

Solicitation # SPE7L7-26-Q-2367

This contract, solicitation number SPE7L7-26-Q-2367, is issued by the Defense Logistics Agency for the procurement of three battery power supplies under National Stock Number 6130-01-647-5605. The agreement is a firm fixed price contract with a delivery requirement of 60 days after the order is received. The items are destined for vessel shipment to the USS Mustin DDG 89 and the USS Theodore Roosevelt CVN 71. Key technical requirements include a non-extendable 12-month shelf life and strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury except where functionally required for batteries. Inspection and acceptance will take place at the point of origin, and the solicitation is designated as a total small business set-aside.

Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-248S

This contract is for the procurement of one Rack Piston, identified by NSN 4810-01-718-8419 and Moog Inc. part number CC80197-001. The item is designated as a critical application item and must be delivered within 20 days. The procurement is managed by the Defense Logistics Agency under solicitation SPE7MC-26-T-248S, with a required delivery date of August 20, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone depleting chemicals. Shipping is FOB Origin to the NAVSEALOGCEN Warehouse Ops in Mechanicsburg, Pennsylvania, and must be sent via traceable means rather than parcel post. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the destination.

Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4514

This contract, identified as SPE8E6-26-T-4514, is a solicitation by the Defense Logistics Agency for the procurement of one decal, part number WWS 45099-3402 (NSN 7690015757778), from Daimler Truck North America LLC. The item is classified as a Type I product with a non-extendable shelf life of 24 months. Delivery is required within five days of order, with the original required delivery date set for September 2, 2026. The agreement mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in Kaiserslautern, Germany. The contract incorporates specific technical and quality requirements from the DLA Master List and requires the removal of government identification from any non-accepted supplies.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4266

This contract, identified as SPE8E5-26-T-4266, is a solicitation by the Defense Logistics Agency for the procurement of welding electrodes. The specific item is a welding rod measuring 0.125 inches in diameter and 14 inches in length, identified by NSN 3439-01-135-3913. The order consists of 3 units of issue, with each unit defined as 10 pounds. The required delivery date is September 1, 2026, with a delivery window of 10 days after the order is placed. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and ASTM-D-3951-98, and requires marking in accordance with MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Shipping is designated as FOB Origin, with the final destination and inspection point located at Fort Carson, Colorado. The procurement also incorporates specific technical and quality requirements under the DLA master list and includes provisions for the handling of hazardous materials.

Welding and Soldering Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHICUL

Solicitation # SPE7L7-26-T-5106

This contract is for the procurement of one pneumatic vehicular tire, identified by NSN 2610-01-644-1336 and part number T251012005 from OTR Wheel Engineering, Inc. The item is classified as Type I with a non-extendable shelf life of 60 months, and it must have at least 42 months of shelf life remaining at the time of delivery. Delivery is required within 20 days, with the destination and inspection point set as Fort McCoy, Wisconsin. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 for marking, and MIL-DTL-4 for the preservation of non-aircraft tires. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Shipping must be conducted via traceable means, specifically prohibiting the use of parcel post.

Tire Manufacturing (except Retreading)

POSTED

about 18 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2369

This contract is for the procurement of five non-spillable lead acid battery assemblies, identified as commercial off the shelf items with part number M350380 from Milpower Source, Inc. The agreement is a firm fixed price contract with a delivery requirement of 60 days after order. The items are classified as critical application items and have a non-extendable shelf life of six months. The supplier must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with OSHA and federal regulations. Specific restrictions are placed on the use of mercury, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of domestic fiberboard pads. Inspection and acceptance will occur at the point of origin, with shipping destined for the UX Arsenal in Ferrol, Spain.

Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0401

This contract is for the procurement of hot rolled, annealed, and descaled titanium alloy metal sheets measuring 0.020 inches thick, 36 inches wide, and 67 inches long. The requirement is for two units under a firm fixed price agreement, with delivery expected 30 days after order. The material must adhere to specific technical standards, including SAE AMS4911T and AMS4907M, and requires a Certificate of Quality Compliance with every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Strict compliance with marking and packaging requirements is mandatory, including continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Shipments must be delivered to the DD Depot OK center at Tinker AFB, with specific palletization and protection requirements to prevent damage.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2368

This contract is a firm fixed price solicitation for the procurement of non-spillable lead acid battery assemblies, identified as commercial off the shelf items. The requirement consists of five line items totaling eight units, with delivery specified as 60 days after the order. Shipments are destined for the USS Tortuga and USS Dwight D Eisenhower, requiring the fastest traceable means of transport and prohibiting the use of parcel post. The contract mandates strict adherence to DLA packaging and marking standards, including the use of domestic fiberboard pads and specific shelf-life requirements of six months. Suppliers must comply with hazardous materials regulations, including the submission of Safety Data Sheets and HCS labels in accordance with OSHA and UN standards. Additionally, the contract prohibits the intentional addition of mercury except where functionally required, and requires all items to be inspected and accepted at the point of origin.

Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-249H

This contract is for the procurement of four brass ball retainers, identified by NSN 4820011894693 and part number 10420 from Flywheel Supply LLC, for use in indicator liquid level model 104-A. The order is issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-249H, with a required delivery date of August 31, 2026, and a delivery window of 20 days. The items are designated as critical application items and must be shipped FOB Origin to the USS MCCampbell DDG 85. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract requires compliance with the DLA Master List of Technical and Quality Requirements.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

CONTAINER, FREIGHT, UTIL

Solicitation # SPE8ED-26-Q-0608

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE8ED-26-Q-0608 for the procurement of two utility freight containers. The items are identified by NSN/Part Number 8150-01-513-6282 and are associated with purchase request 7016941882. This federal solicitation was posted on September 3, 2026, with a response deadline of September 10, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 18 hours ago

DEADLINE