Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Packaging, Preservation, and Marking Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

General Info

Provide military-compliant packaging, labeling, and barcoding for chain assemblies per DLA and DoD standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Military-compliant packaging, preservation, and labeling of chain assemblies per DLA standards, including barcoding and hazardous communication compliance.

Similar Contracts

Same NAICS industry code

NAICS: 493190
New
Federal
Equipment Racks -19CABS
Solicitation # FA446026Q0026
The Department of the Air Force is soliciting bids for HUSKY Equipment Racks under solicitation number FA446026Q0026, a Small Business Set Aside totaling all awards, with the North American Industry Classification System code 493190. The solicitation is centered at Little Rock Air Force Base in Arkansas, with all work to be performed there, and requires strict adherence to all attached documents for quote submission and performance. A mandatory site visit is scheduled for July 28, 2026, at 10:30 AM local time at the base visitors center, with only two personnel per contractor permitted to attend; attendees must RSVP by July 24, 2026, at 4:00 PM local time, possess a valid REAL ID, and provide proof of vehicle insurance. No further site visits will be permitted. Questions regarding the solicitation must be submitted no later than July 30, 2026, at 12:00 PM local time, after which no additional inquiries will be accepted. The response deadline for proposals is August 4, 2026, at 7:00 PM local time, with points of contact for inquiries being Amaya Jordan and Paul Denton. This procurement is issued as Amendment 3 to prior documents, primarily to disseminate previously submitted questions and answers along with additional drawings, but no details on technical specifications, packaging, evaluation criteria, delivery schedules, or contract value are provided in the available information.
FA4460 19 Cons Pka

POSTED

1 day ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.
Administrative Management and General Management Consulting Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.
Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 326291
New
DIBBS
CHAIN ASSEMBLY, TIRE
Solicitation # SPE7L1-26-R-0099
The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-897Q
The contract specifies the procurement of 40 solid plain aluminum alloy disks, each with a nominal diameter of 11.000 inches and a thickness of 0.050 inches, manufactured to ASTM B209/B209M Revision A dated 12/01/2021 using aluminum alloy 1100. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and must conform to current revision specifications unless previously accepted versions are referenced under grandfathering provisions. The material must not contain any Class I ozone-depleting chemicals, and any substitutes require prior approval. Packaging and marking must follow DLA Packaging Requirements RP001 and MIL-STD-129, with hazardous material packaging governed by IP025 and Fed-Std-313; non-hazardous items require commercial packaging per ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless specified otherwise, and attributes are assigned verification levels or AQLs based on criticality. The item is identified by NSN 5340-01-343-8698 and purchase request 7017696212, with a unit price of $40.00 per piece for a total price of $1,600. The delivery schedule requires shipment within 100 days of contract award with FOB origin terms, and goods must be delivered to the designated DLA Distribution facility in New Cumberland, PA, with a specified need date of November 19, 2026. No quantity variance is permitted. Inspection and acceptance occur at the destination. All packaging must be palletized according to RP001, and labeling and marking must align strictly with DLA and military standards. The solicitation is open to full and fair competition under NAICS code 332510, with responses due by August 10, 2026, and technical oversight managed by the Department of Defense through the Land Supply Chain organization.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-900R
This contract is for the procurement of a replacement cover identified by NSN 5340017328379 and part number TA486-RC-1841, with a quantity of 66 units to be delivered FOB origin within 151 days of contract award. The item is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization. Marking must follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA guidelines. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for both freight shipping and parcel post. The contract imposes a strict prohibition on the use of Class I ozone-depleting chemicals, overriding but not relaxing any product specifications, and any substitute chemicals require prior approval. The unit price is $66.00 per unit, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The procurement is governed by DLA procedures for transportation and freight, and all references to units of issue must align with ANSI X12 standards. The solicitation was issued on July 30, 2026, with a response deadline of August 10, 2026, and the original required delivery date is January 9, 2027.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
DIFFUSER ASSEMBLY
Solicitation # SPE7L1-26-T-896P
The contract pertains to the procurement of eight diffuser assemblies with NSN 1005-01-029-9255 under solicitation SPE7L1-26-T-896P, with delivery required within 359 days after order. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The supplier must comply with DLA packaging standards and is obligated to adhere to export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons regardless of location, with compliance contingent upon prior approval from the Department of State or Commerce. Only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export-controlled data training and approved by DLA, may access the controlled technical data. Additionally, the contractor must be a CMMC Level 2 certified third-party assessment organization, and all measuring and test equipment used must meet specified standards. The contract is governed by DFARS 252.225-7048 and includes requirements for demilitarization of Category I munitions items, and specialized quality controls applicable to both manufacturers and non-manufacturers. The point of contact for inquiries is Zane Zwayer, and performance is designated to occur in Tracy, California, with the solicitation closing on August 10, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7L1-26-T-899J
The contract is for the procurement of three protective dust caps with NSN 5340-01-565-6757 and part number 800-0052, issued under solicitation SPE7L1-26-T-899J by the Department of Defense’s Land Supply Chain. The unit price is $3.00 per unit for a total value of $9.00, with delivery required FOB origin within 215 days of contract award. The items must be delivered to the designated receiving warehouse in Tracy, California, and are subject to inspection and acceptance at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous items must be commercially packaged according to ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must conform to RP001 DLA packaging standards. The contractor must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and ensure all government identification is removed from non-accepted supplies in accordance with MIL-STD-130N. The contract includes strict quantity controls with zero variance tolerance and requires compliance with all referenced DLA operational and logistical directives, including transportation and shipping procedures outlined in DLAD PROC NOTES C19 and C20.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-897U
The contract pertains to the procurement of 15 protective dust and moisture seal plugs with NSN 5340-01-434-1353, issued under solicitation SPE7L1-26-T-897U by the Defense Logistics Agency through the Land Supply Chain organization. Delivery is required within 290 days from award, with responses due by August 10, 2026, and the solicitation opened on July 30, 2026. The item is subject to full and open competition under NAICS code 332510, and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must comply with prohibitions against Class I ozone-depleting chemicals, and any substitutes require prior approval unless explicitly authorized. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, necessitating prior authorization for any export or disclosure to foreign persons, including foreign nationals within the U.S., with DFARS 252.225-7048 enforcing compliance. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The place of performance is identified as New Cumberland, Pennsylvania, 17070-5002, with Isabelle Szulewska listed as the primary point of contact.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details