Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

PACKING ASSEMBLY

Active
SPRPA127QXA11Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPRPA1-27-Q-XA11 is issued by DLA Aviation at Philadelphia for the procurement of 15 units of NSN 5330-01-699-6863 B8 Packing Assembly. This is a small business set-aside for a critical safety item, with a delivery requirement of 90 days and FOB destination terms. The government intends to make a single award based on a primary evaluation of past performance, utilizing the DoD Supplier Performance Risk System for ratings, with price serving as a secondary factor. Inspection and acceptance will occur at the origin, and the contractor must adhere to ISO9001 quality management systems and specific calibration standards. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for labeling. Requirements include the use of Wide Area Workflow for invoicing and receiving reports, and compliance with the Buy American and Balance of Payments Program. Additionally, the contractor must manage Engineering Change Proposals according to DI-SESS-80639E and ensure all wood packaging materials comply with ISPM 15. Quotations are due by November 2, 2026.

General Info

DLA Aviation seeks 15 B8 Packing Assemblies via a small business set-aside.

Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

1

RFQ SPRPA1-27-Q-XA11 - Packing Assembly

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
Alana Berkheiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)||TBD|SPRPA1|TBD|TBD|TBD|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|ROBYN GRINARML| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| THIS SOLICITATION IS BEINF RELEASED UNDER EAF AUTHORITY. THIS IS A CRITICAL SAFETY ITEM. \

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
Federal
PACKING ASSEMBLY
Solicitation # SPRPA127QXA12
Solicitation SPRPA1-27-Q-XA12, issued by DLA Aviation at Philadelphia, is a request for quotations for a Packing Assembly (NSN 5142T71P05). This item is designated as a Critical Safety Item, requiring strict adherence to quality and safety standards. The government intends to make a single award to a technically acceptable offeror based on an evaluation of price, item risk, supplier risk, and past performance. Delivery is required within 90 days, with inspection and acceptance occurring at the origin. The contractor must comply with ISO9001 Quality Management Systems and specific calibration standards. Packaging must adhere to MIL-STD-2073, with Level B requirements for domestic and most overseas shipments and Level A for surface overseas shipments. Marking and labeling must follow MIL-STD-129 and MIL-STD-130 for unique item identification. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system using the issuing DoDAAC SPRPA1. The contract also incorporates critical regulatory requirements, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and priority ratings for national defense.
Pa DLA Aviation At Philadelphia

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Supplier of Plain Seals (NSN 5330-01-466-66642)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the manufacture or sourcing of 101 plain seals, part number 8HA8, compliant with NSN 5330-01-466-66642. The selected supplier must ensure all items are packaged in medium duty, waterproof, greaseproof, and opaque bags, with marking performed according to MIL-STD-129 standards. Delivery is required FOB Origin within 42 days of the order. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 339991. Interested parties must submit their responses by November 2, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN/Part 7018754514)This subcontract involves the manufacture or procurement of five domestic gaskets under part number 7018754514 for the Department of Defense, specifically supporting the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The contractor is responsible for ensuring the gaskets are of domestic origin and meet all specified technical requirements for prime contractors on Defense Logistics Agency supply contracts. Strict adherence to military packaging and marking standards is required. Items must be sealed in medium duty, waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1 to ensure UV protection. Additionally, all shipments must be marked in accordance with MIL-STD-129 and MIL-STD-2073-1E before final delivery.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN 5330014783393)This subcontract involves the supply of 194 units of gaskets, identified by NSN 5330014783393, for prime contractors operating under Department of Defense DIBBS contracts. The selected provider is responsible for manufacturing or sourcing the gaskets according to strict technical specifications. Each unit must be individually packaged in medium-duty waterproof and greaseproof opaque bags and marked in accordance with MIL-STD-129 standards. The contract is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support and requires strict adherence to DFARS 252.204-7012 and NIST SP 800-171 cybersecurity standards. Performance will take place in Tracy, California, under NAICS code 339991. The response deadline for this requirement is October 29, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supplier of Nonmetallic Round Section Seals (Boeing P/N 113T1256-35)This subcontract with the Department of Defense DLA Weapons Support ASC Commodities Division requires the procurement or manufacture of seven nonmetallic round section seals. These components must strictly adhere to Boeing part number 113T1256-35 and NSN 5330016840464 specifications, as they are designated as Critical Application Items for aerospace projects. The supplier is obligated to provide mandatory quality documentation, including a Certificate of Airworthiness and Conformance for FAA Certified Parts. Performance for this contract is centered at Tinker AFB, with a response deadline set for October 26, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
Supply of Specialized O-Rings (NSN 5331-00-947-2158)This subcontract involves the procurement of 104 specialized O-rings under NSN 5331-00-947-2158 to support prime contractors for the DLA Weapons Support Land Supply Chain within the Department of Defense. The contractor is responsible for manufacturing or sourcing these components using UV-resistant materials that are strictly free of asbestos in accordance with FED-STD-313. To ensure operational readiness and compliance, all units must undergo sampling and quality inspection following MIL-STD-1916 or ASQ H1331 Table I standards. The project falls under NAICS code 339991, with a response deadline set for November 2, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN 5330150231199)This subcontract involves the manufacture or procurement of 37 gaskets matching NSN 5330150231199 for prime contractors supporting the Defense Logistics Agency. The items must be packaged in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1 specifications. To be eligible, providers must possess a valid CAGE code and UEI registration. The contract is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in Tracy, California. Interested parties must submit their responses by October 29, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-27-T-1033
Solicitation SPE7L3-27-T-1033 is a federal procurement issued by the Defense Logistics Agency for the acquisition of 10 plain encased seals, identified by NSN 5330008520451. This is designated as a critical application item and must be sourced from approved providers, including John Crane Inc, Crane John Canada Inc, or Vanseal Corp. The procurement is conducted under NAICS code 339991, with the award based solely on the bid price. Delivery is required within 130 days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to technical and quality standards, including the prohibition of asbestos as defined in FED-STD-313. Packaging must comply with MIL-STD-2073-1E and RP001, with specific requirements for opaque, waterproof, and greaseproof bags to prevent deterioration from ultraviolet rays. Marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by October 29, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L4-27-U-0079
Solicitation SPE7L4-27-U-0079 is a fixed-price, indefinite delivery contract issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 24 metal seal rings under NSN 5330-00-835-6637. The requirement is managed under the First Destination Transportation program, requiring offers to be submitted based on FOB Origin, with inspection and acceptance occurring at the destination. The delivery timeline is specified as 91 days, and all quotes must be submitted via the DLA Internet Bid Board System by November 2, 2026. The contract mandates strict adherence to technical and quality standards, including RA001, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Specifically, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Compliance with the Buy American Act and the Berry Amendment is required, with a reduced threshold of 150,000 dollars. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. The procurement may be eligible for automated award and includes a price evaluation preference for HUBZone concerns.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-27-T-1721
Solicitation SPE7L1-27-T-1721 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for 32 units of a gasket, identified by NSN 5330-15-012-1640 and part number 504052265. IVECO (CAGE code A4249) is designated as the only approved source for this item, and substitutions are prohibited. The delivery is required within 199 days after receipt of order, with a need ship date of May 17, 2027, and a final required delivery date of October 31, 2027. Delivery and inspection will take place at the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with shipping terms set as FOB Origin. The contract mandates strict adherence to material and quality standards, specifically prohibiting the use of asbestos, Class I ozone-depleting chemicals, and the intentional addition of mercury. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific UV protection requirements per MIL-DTL-117 for sensitive items and a do not bend marking requirement. Offerors must submit quotes via the DIBBS portal by October 29, 2026, and must maintain active registration in the System for Award Management. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. Additional compliance requirements include the Buy American Act, DFARS cybersecurity reporting, and the Hazard Communication Standard for any applicable hazardous materials.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-27-T-0994
Solicitation SPE7L3-27-T-0994 is a federal procurement for 18 plain seals, identified by NSN 5330013247020. This critical application item is issued by the DLA Weapons Support Land Supplier Operations Vehicle Support. The contract requires delivery within 140 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the use of waterproof, greaseproof, opaque bags to protect items from ultraviolet rays and a total prohibition of asbestos. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment compliance, and cybersecurity reporting under DFARS 252.204-7012. Offers must be submitted via the DLA Internet Bid Board System, and the government may utilize the HUBZone price evaluation preference for award.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-27-T-0992
Solicitation SPE7L3-27-T-0992 is a fixed-price procurement issued by the DLA Weapons Support Land Supplier Ops Vehicle SPT for the supply of gaskets identified by NSN 5330009942069. The requirement consists of 102 units under CLIN 0002, with a delivery window of 63 days after order. The place of performance is listed as APO 96368-5160, and shipping is FOB Origin. Quotations are due by October 29, 2026, and must be submitted to the issuing office in Columbus, Ohio. The contract mandates strict adherence to quality and material standards, specifically prohibiting the use of asbestos as defined in FED-STD-313. Packaging must comply with MIL-STD-2073-1E and RP001, with specific requirements for items in Federal Supply Classifications 5330/5331 to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Marking must follow MIL-STD-129. Inspection and acceptance will occur at the destination. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and comply with the Buy American Act and Berry Amendment domestic material restrictions.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 336413
New
Federal
CAP,VALVE
Solicitation # SPRPA126QYD49
Solicitation SPRPA126QYD49 is a small business set-aside request for quotation issued by the Defense Logistics Agency, specifically the Pa DLA Aviation office in Philadelphia, for the procurement of valve caps under NSN 7RH 1650-01-581-5412. The acquisition is conducted under Emergency Acquisition Flexibilities authority and is restricted to government-approved sources of supply; distributors must provide an authorized distributor letter on the source's letterhead to be considered technically acceptable. The contract requires a delivery timeframe of 90 days with FOB Destination terms. Award will be made to a single offeror based on a best-value determination where past performance is weighted as more important than price. The contractor must maintain ISO 9000 or equivalent quality standards and adhere to strict packaging and marking requirements, including MIL-STD-2073 and MIL-STD-129. Specific barrier materials must comply with applicable Qualified Products Lists, and electrostatic discharge protection must meet ANSI/ESD S20.20-2021 standards. Payment and invoicing are to be processed electronically via the Wide Area Workflow system. Key regulatory requirements include the Buy American and Balance of Payments Program, safeguarding of covered defense information, and compliance with the System for Award Management. Inspection and acceptance will occur at the origin via the Contract Administration Office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
16--CYLINDER ASSEMBLY,O
Solicitation # SPRPA126QUB80
Contract NSN 7R-1660-010140576-P8, solicitation SPRPA126QUB80, is a pre-solicitation for the procurement of 22 units of a 16-cylinder assembly. This commercial off-the-shelf item is being acquired by the Department of Defense through the DLA Aviation office in Philadelphia with delivery terms set as FOB Origin. The acquisition is designated as a 100 percent set-aside for small business concerns. Because the item is flight critical or lacks sufficient technical data for open competition, Government source approval is mandatory prior to contract award. Only previously approved sources have been solicited, and new applicants must submit comprehensive documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered. Proposals must be submitted by the deadline of November 16, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332710
New
Federal
CHASSIS,ELECTRICAL-
Solicitation # SPRPA127QYA32
Solicitation SPRPA1-27-Q-YA32 is a Request for Quotations issued by DLA Aviation at Philadelphia for the procurement of electrical chassis (NSN 7RH 5975-01-618-2724). This acquisition is conducted under Emergency Acquisition Flexibilities (EAF) authority, formerly known as Special Emergency Procurement Authority (SEPA). The delivery requirement is set for 90 days, with shipping terms established as FOB Destination. Inspection and acceptance will occur at the origin, and the government is the responsible party for final acceptance. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification using two-dimensional data matrix symbology. Payment and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system. Award evaluation will be based on item risk, price risk, and price, with price serving as a secondary factor to past performance. Offerors must comply with the Buy American Act, NIST SP 800-171 for cybersecurity, and various equal opportunity regulations. Quotations are due by November 16, 2026.
Machine Shops

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
SEAL,METALLIC,AIRCR
Solicitation # SPRPA127QXA10
Solicitation SPRPA1-27-Q-XA10 is a request for quotations issued by the Department of Defense, specifically the Pa DLA Aviation office in Philadelphia, for the procurement of metallic aircraft seals (NSN 2840-01-699-6734 B8). The government intends to make a single award based on a best-value determination where past performance is the primary evaluation factor and is considered more important than price. Offerors are evaluated using the DoD Supplier Performance Risk System (SPRS) with color-coded ratings from Dark Blue to Red, while also being assessed for item, price, and supplier risk. The contract requires delivery within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. Strict quality and packaging standards are mandated, including compliance with ISO9001, MIL-STD-129 for marking, and MIL-STD-2073-1 for preservation. Specific packaging levels are required based on the destination, with Level B for domestic and most overseas shipments and Level A for overseas surface shipments. Payment must be processed through the Wide Area Workflow (WAWF) system. The solicitation also incorporates various regulatory requirements, including the Buy American Act, cybersecurity standards under DFARS 252.204-7012, and hazardous material labeling per 49 CFR and OSHA standards.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
Federal
SHROUD SEGMENT,TURB
Solicitation # SPRPA127QXA09
Solicitation SPRPA127QXA09 is a small business set-aside fixed-price contract issued by the DLA Aviation office in Philadelphia for the procurement of 122 units of Shroud Segment, Turb (NSN 2840-01-699-6680 B8). The government intends to make a single award based on a combination of past performance and price, with past performance serving as the primary evaluation factor. Offerors are evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The contract mandates strict adherence to military standards, including MIL-STD-2073 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for item unique identification using two-dimensional data matrix symbology. Contractors must comply with specific quality management and calibration standards such as NCSL Z5403 or ISO 10012. Administrative requirements include the mandatory use of Wide Area Workflow (WAWF) for electronic submission of payment requests and receiving reports. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding the Buy American Act, safeguarding covered defense information, and equal opportunity for veterans and workers with disabilities.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
NRP,PCB ASSY,CT PWR
Solicitation # SPRPA127QYA19
Solicitation SPRPA127QYA19 is a small business set-aside for the acquisition of a PCB Assembly, CT PWR (NSN 1680-01-644-7153 EY) issued by DLA Aviation at Philadelphia. This fixed-price procurement is conducted under Emergency Acquisition Flexibilities (EAF) authority, with a delivery requirement of 90 days and FOB Destination terms. The government will make a single award based on a trade-off where past performance is considered more important than price. Offerors must be government-approved sources of supply, and distributors are required to provide an authorized distributor letter on the source's letterhead at the time of proposal submission. The contract mandates strict quality and packaging standards, requiring compliance with ISO 9000 or equivalent and adherence to MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Specific requirements for electrostatic discharge protection per ANSI/ESD S20.20-2021 apply to sensitive items. Inspection and acceptance will occur at the origin. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and payment. The response deadline for quotations is November 16, 2026, with submissions directed to the primary point of contact, Amanda Bird.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 335312
New
Federal
STATOR ASSEMBLY,GEN
Solicitation # SPRPA127QYA33
Solicitation SPRPA1-27-Q-YA33 is a request for quotations issued by DLA Aviation at Philadelphia for the procurement of one Stator Assembly, Gen (NSN 6115-01-172-6527). This acquisition is conducted under Emergency Acquisition Flexibilities authority and is managed under the configuration control of the Naval Air Systems Command Program Manager. The government intends to make a single award to a technically acceptable offeror determined to be most advantageous, considering factors such as supplier risk, quality, and delivery performance. Delivery is required within 90 days, with FOB Destination terms and inspection and acceptance occurring at the origin. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129, MIL-STD-130, and MIL-STD-2073, with specific requirements for DLR labels and electrostatic discharge protection where applicable. Payment and invoicing must be processed through the Wide Area Workflow system. Technical compliance is critical, as any departures from product definitions require an approved Request for Variance, with critical or major variances necessitating a contract modification. The solicitation also incorporates various federal and defense regulations, including the Buy American Act, safeguarding of covered defense information, and requirements for the submission of Safety Data Sheets for hazardous materials.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
NOZZLE ASSEMBLY,TUR
Solicitation # SPRPA127QXA08
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333249
New
Federal
Supply of Mechanical Actuator (NSN 7RH 1680-01-606-1832 EK)This subcontract involves the manufacture or sourcing of mechanical actuators, specifically NSN 7RH 1680-01-606-1832 EK, for prime contractors supporting DLA Aviation projects under the Department of Defense. Because the actuator is designated as a Critical Safety Item, the provider must maintain an ISO 9001 quality system and adhere to DPAS D0-A1 prioritization to ensure strict production and delivery standards. Technical requirements include the implementation of Item Unique Identification per 252.211-7003 and packaging according to MIL-STD-2073 with appropriate DLR labeling. Each delivered unit must be accompanied by a Certificate of Conformance. The opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 333249.
Other Industrial Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 28 days
View Details
NAICS: 423840
New
Federal
Authorized Distribution of Aircraft Elevator Feel ComponentsThis subcontract through the Department of Defense for DLA Aviation at Philadelphia involves the authorized distribution of newly manufactured aircraft elevator feel components, specifically NSN 7RH 6615-01-651-9807. The selected provider must source parts from original approved suppliers and ensure all components are accompanied by verified FAA Authorized Release Certificates Form 8130-3. All deliverables must be shipped FOB Destination and adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129. To qualify for this opportunity, contractors must hold AS9100 certification and provide an authorized distributor letter. The solicitation was posted on October 16, 2026, with a response deadline of October 26, 2026. This requirement falls under NAICS code 423840 and is intended to support prime contractors working on DLA Aviation projects.
Industrial Supplies Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
Manufacturing of Aircraft Elevator Feel ComponentsThis subcontract involves the precision manufacturing of new aircraft elevator feel components, identified by NSN 7RH 6615-01-651-9807, for prime contractors supporting DLA Aviation projects under the Department of Defense. The work must be performed according to NAVAIR baseline configurations and requires the use of ESD-protected environments compliant with ANSI/ESD S20.20-2021 standards. The selected provider must maintain AS9100 quality management certification and hold valid FAA certification. All delivered components must be accompanied by FAA Form 8130-3 and Material Safety Data Sheets. This opportunity falls under NAICS code 336413 and is managed by the DLA Aviation office in Philadelphia.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS