Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PACKING ASSEMBLY

Active
SPE7L4-26-U-0989Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four packing assemblies identified by NSN 5330-01-430-0232 under solicitation SPE7L4-26-U-0989, with delivery required within 126 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for simplified acquisitions. The supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, and packaging must comply with DLA packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless expressly authorized by the specifications. All technical data associated with this item is subject to export controls under ITAR or EAR, and dissemination to foreign persons, including foreign national employees and subsidiaries, is restricted without prior authorization. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training and the DLA export-controlled data questionnaire, and have received specific approval from the DLA controlling authority. The contract is issued by the Department of Defense through LSO Combat Vehicles and Armament, with primary point of contact Heather Kessler, and NAICS code 332710 applies.

General Info

Procure four packing assemblies, CMMC Level 2 certified, comply with DLA standards, ITAR/EAR controls, no ozone-depleting chemicals, delivery in 126 days.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-U-0989.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
HEATHER KESSLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PACKING ASSEMBLY
PACKING ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5330-01-430-0232 Quantity: 4 EA Purchase Request: 1000236954QTY: 4 Delivery: 126 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
DIBBS
Precision Metal Shim ManufacturingThe contract requires the manufacture of 42 precision metal shims identified by NSN 5365-00-942-1796, with all production activities—including machining, inspection, and packaging—strictly following Department of Defense technical specifications and military standards. The work must be completed in compliance with the NAICS code 332710, which covers other fabricated metal product manufacturing, and performance is to take place at a designated location in San Diego, California, with ZIP code 92136-3581. The solicitation is structured as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 22, 2026. All deliverables must meet exacting quality and documentation requirements to ensure full alignment with military supply chain protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Manufacturing of Rotary FilesThe contract seeks the precise manufacture of rotary files adhering strictly to DLA specifications, demanding exacting control over material composition, dimensional tolerances, and performance benchmarks to ensure reliability and consistency under demanding operational conditions. Compliance with these technical requirements is non-negotiable, as the final products are intended for use within defense applications where failure is not an option. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, and is structured as a subcontract under NAICS code 332710, which classifies it within precision manufacturing of metal tools. Performance is required at the New Cumberland facility with a zip code of 17070-5002, and the contracting entity is the Department of Defense through its DDSP New Cumberland Facility. The contract underscores a high-stakes manufacturing environment where adherence to military-grade standards governs every phase of production, inspection, and delivery.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Clutch ComponentsThe contract involves the sub-tier precision machining of critical clutch components including pressure plates, diaphragm springs, and hubs, all manufactured to meet stringent military specifications. The work is classified as a subcontract under NAICS code 332710, which pertains to forged and stamped metal product manufacturing, and is solicited by the Department of Defense through its LAND SUPPLY CHAIN organization. Performance of the contract is required at the designated location in Anniston, Alabama, with a zip code of 36201-4199, indicating the need for localized production capabilities aligned with military logistics networks. Responses to the solicitation must be submitted by August 3, 2026, with the posting date initially set for July 22, 2026, leaving a narrow window for qualified subcontractors to prepare and submit proposals. There is no specified set-aside type, meaning the opportunity is open to all eligible contractors regardless of business size or status. The absence of a listed point of contact suggests that all communications and submissions must follow the procedural guidelines provided via the official DIBBS portal link. Compliance with exacting military standards is paramount, and success will depend on demonstrated ability to deliver high-precision, mission-critical components reliably and on schedule.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
V-Belt Supply (NSN: 3030017180096)The contract obligates the supplier to provide a single unit of a V-belt identified by National Stock Number 3030017180096, fully compliant with all military packaging, labeling, and hazardous materials documentation standards. The item is required for delivery to a military operational location designated as FPO with ZIP code 09532, and the supplier must adhere to strict defense supply chain protocols to ensure readiness and regulatory compliance. This is a subcontract under the NAICS code 332710, issued by the Department of Defense through its Land Supply Chain organization, with no set-aside provisions applied. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, creating a twelve-day window for proposal preparation and submission. The contract is accessible via the DIBBS platform, and while no point of contact is listed, all inquiries must be handled through the official procurement portal. The supplier must ensure that the V-belt meets all technical specifications associated with the NSN, including material composition, dimensional tolerances, and performance under military environmental conditions, with no exceptions permitted for packaging or labeling. Failure to comply with hazardous materials documentation will result in rejection of the offer.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
Federal
Compressor Rotor SLIQ ComponentThe contract is for the manufacture of a specialized compressor rotor component or qualification tool intended for use in E-2D engine rebuild operations, demanding stringent aerospace-grade material specifications and extremely tight dimensional tolerances to ensure performance and reliability under operational stress. This subcontract is part of a broader effort by the Naval Air Warfare Center Aircraft Division to support critical maintenance and sustainment activities for Navy aircraft systems, with the component playing a vital role in engine functionality and longevity. The opportunity was posted on July 22, 2026, with a firm response deadline of August 6, 2026, at 1:00 PM, and is classified under NAICS code 332710, indicating it falls under the precision forging and stamping industry sector. All work must be performed in accordance with defense procurement standards, though specific performance location and point of contact details are not provided. The contract is issued under the Department of Defense, with no set-aside designation specified, making it open to qualified subcontractors regardless of size or certification status.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
Federal
Fuel Nozzle Flow Check FixtureThe contract is for the development and delivery of a precision fixture designed to validate the flow characteristics of fuel nozzles during engine overhaul and depot-level maintenance operations. This specialized tool is critical for ensuring the proper performance and reliability of fuel delivery systems in aircraft engines, supporting maintenance standards required by the Department of Defense. The fixture must meet exacting engineering specifications to accurately measure and verify fuel flow rates under conditions that simulate real-world engine environments, enabling technicians to identify defects or degradation that could compromise engine efficiency or safety. The contract is classified as a subcontract under NAICS code 332710, which pertains to industrial machinery and equipment manufacturing, indicating the technical and precision manufacturing nature of the work. It was posted on July 22, 2026, with a response deadline of August 6, 2026, suggesting a limited window for qualified vendors to submit proposals. The performing organization is the Naval Air Warfare Center Aircraft Division, a key component of the Navy’s aviation maintenance and engineering infrastructure. While specific delivery locations and points of contact are not provided, the work is expected to support national defense maintenance operations, requiring compliance with stringent quality and documentation standards typical of defense contracts.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
Federal
Engine Test Cell AdapterThe contract involves the manufacture of a custom adapter component designed to interface engine systems during test cell operations at military depot facilities, specifically under the oversight of the Naval Air Warfare Center Aircraft Division within the Department of Defense. The component must meet precise engineering specifications to ensure safe, reliable, and accurate testing of aircraft engines in controlled environments, and the work is classified under NAICS code 332710, indicating it falls within the precision instrument manufacturing sector. This is a subcontract opportunity with a response deadline of August 6, 2026, and no set-aside provisions are specified, meaning all eligible contractors may compete without restriction based on business size or other classifications. The place of performance and delivery location are not explicitly defined in the provided details, but the nature of the work suggests that final integration and validation will occur at designated military test facilities under Navy oversight. The solicitation was posted on July 22, 2026, and offers a three-week window for interested parties to prepare and submit proposals. No point of contact information is provided within the public data, requiring potential bidders to access the official SAM.gov workspace link to obtain further technical requirements, drawings, compliance guidelines, and submission protocols. The scope demands advanced manufacturing capabilities including precision machining, materials validation, and adherence to defense-grade quality standards to support critical defense test operations.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
Federal
Turbine Rotor Labyrinth Seals Checking FixtureThe contract calls for the design, fabrication, and delivery of a precision inspection fixture specifically engineered to verify the dimensional accuracy and alignment of turbine rotor labyrinth seals used in the maintenance of the E-2D engine. This fixture must meet stringent engineering tolerances to ensure reliable validation of seal integrity during service inspections, directly supporting maintenance operations critical to aircraft readiness and performance. The work is classified as a subcontract under NAICS code 332710, indicating it falls within the precision instrument manufacturing sector, and is being procured by the Naval Air Warfare Center Aircraft Division under the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, at 1:00 PM, emphasizing a tight timeframe for proposers to submit technical and commercial offers. The place of performance and agency location details are unspecified, but the work is tied to naval aviation maintenance requirements and is expected to be performed by a qualified subcontractor with experience in precision fixture manufacturing for aerospace applications. No set-aside provisions are indicated, meaning the opportunity is open to all eligible vendors regardless of business size or classification.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
Federal
MLG/NLG Cycling FixtureThe Naval Air Warfare Center Aircraft Division is soliciting proposals under Firm Fixed Price terms for the manufacture, assembly, inspection, and delivery of Intermediate & Depot Level Peculiar Support Equipment kits for the V-22 aircraft, including both Domestic and Foreign Military Sales platforms. This solicitation, numbered N68335-26-R-1041 and titled V-22 MLG/NLG Cycling Fixture, is issued as a 100% Small Business Set-Aside under NAICS code 332710, requiring offerors to be certified small businesses with active SAM representations confirming status. Proposals must be submitted electronically through the Procurement Integrated Enterprise Environment by the July 22, 2026 deadline, and must include a signed SF-33, accurate pricing aligned with Section B CLINs, full representations and certifications via SAM, and copies of all applicable amendments. Access to the Government-furnished technical data package containing Controlled Unclassified Information requires prior verification of CMMC Level 2 (Self-Assessment) certification and a certified DD Form 2345 for export-controlled technical drawings, both of which are mandatory prerequisites for proposal eligibility. Failure to meet either requirement results in immediate disqualification. The contract requires compliance with stringent quality and packaging standards, including AS9100D certification at award and throughout performance, adherence to MIL-STD-129R and MIL-STD-130N for marking and Unique Item Identification, and ISPM-15 compliance for all wood packaging. All deliverables must be manufactured to Government-issued drawings and inspected at origin by DCMA before final acceptance at NAWCAD Lakehurst, NJ. Deliveries are due six months after award, covering eight distinct CLINs totaling 30 units across multiple V-22 variants, with FOB terms either Destination or Origin depending on the line item. Invoicing must be processed through the Wide Area Workflow system using required documentation such as DD-250s, and payments are subject to line item-specific proration. The solicitation includes numerous FAR and DFARS clauses governing cybersecurity, subcontracting, anti-kickback, whistleblower rights, and procurement integrity, with all proposals required to be unclassified. The Contracting Officer retains discretion over any deviations, and proposal submission through unauthorized channels, including email or DOD SAFE, will not be accepted unless PIEE is offline.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
Federal
CLAMP PLATESThe contract seeks the procurement of clamp plates under a total small business set-aside as defined by FAR 19.5, with the NAICS code 332710, issued by the Department of Energy through its contractor, Berkeley National Laboratory. The solicitation, numbered MG-07142026, was posted on July 15, 2026, and responses are due by July 24, 2026, at 3:00 PM Pacific Time. The requirement is for commercial products as defined in FAR 2.101, and offerors must respond based on the attached RFQ Rev. 1, which includes the exact production unit quantities and associated technical drawings and documents. The place of performance is in Berkeley, California, and all items must be new, free from counterfeit or suspect materials, and comply with applicable federal, state, and local regulations, including DOE and OSHA standards. Electrical components rated at 50 volts or higher must be NRTL-listed, labeled, and certified per OSHA Part 1910. Contractors must adhere to the Buy American Act as modified by DEAR 970.2570-1, and are subject to whistleblower protections, ethical conduct requirements, and prohibitions on contracting with restricted entities such as Kaspersky Lab. The subcontractor assumes full liability for packaging inadequacies and must clearly mark all packages with the university subcontract number and include an itemized packing list, with encouragement to use biodegradable materials. Quality assurance is governed by DOE O 414.1D, and the contractor must comply with the LBNL Health and Safety Manual and 10 CFR 851 for worker safety, including ensuring all personnel requiring site access complete General Employee Radiological Training. Inspection rights are reserved by the University at any time, and acceptance is not implied by inspection or payment; rejection of non-conforming items requires the contractor to correct defects at its own expense, and suspect or counterfeit materials may be impounded and payment withheld pending investigation. Payments are due 30 days after receipt of a properly prepared invoice, issued via check or electronic transfer at the University’s discretion, with full compliance to invoicing requirements mandatory to avoid payment delays.
Berkeley National Labor - DOE Contractor

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332710
New
Federal
Manufacturing & Services Acquisition (MASA) Manufacturing SupportThe contract N0017426R1003 for the Manufacturing & Services Acquisition (MASA) Manufacturing Support is a multiple-award, firm-fixed-price, indefinite-delivery indefinite-quantity (IDIQ) vehicle established to procure manufactured parts and assemblies through machine shop processes in support of military programs. The requirement spans five distinct task areas—Production Hardware, Research and Development Hardware (small business set-aside), Plating (small business set-aside), Electronics Assembly, and Advanced Machining—with a total estimated ceiling of $40 million shared among awardees. The solicitation is partially set aside for small businesses under NAICS code 332710, with Task 2 and Task 3 restricted to small business concerns while Tasks 1, 4, and 5 are open to all eligible parties. The period of performance runs from December 16, 2026, to December 15, 2031, with delivery schedules determined at the task order level under F.O.B. Destination terms. Offerors must demonstrate capability to perform at least 50% of the work with their own personnel or first-tier subcontractors and propose for at least one task area to be eligible for award. Proposals must be submitted electronically in three volumes—Technical, Past Performance, and Small Business Subcontracting Plan if applicable—with strict formatting, page limits, and a 240-day validity period. The Contract Data Requirements List (CDRL) DD Form 1423 A001-A010 and compliance with MIL-STD-130 and MIL-STD-129 for item identification and packaging are mandatory, and all deliverables must meet ANSI/ASQC Q9000 through Q9004 quality standards or equivalent. Cybersecurity requirements mandate CMMC Level 2 self-certification and implementation of DFARS 252.204-7012 for systems handling FCI or CUI, with System Security Plans and Plans of Action and Milestones to be made available for government review within 30 days of award. No classified information is anticipated, but OPSEC training per DoD Manual 5205.02-M and NSWC IHD 3070.3D is required, and Government Furnished Property will be provided for Task 3 performance. Invoicing must occur through Wide Area WorkFlow (WAWF), with mandatory email notifications to
Nswc Indian Head Division

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
Federal
53--PACKING ASSEMBLY
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 541512
New
DIBBS
NIST SP 800-171 Compliance AssessmentThe contract requires the execution of a comprehensive assessment and documentation effort to ensure compliance with NIST Special Publication 800-171 standards for protecting covered defense information as mandated by DFARS clauses. This effort involves evaluating existing security controls, identifying gaps, and implementing necessary remediations to meet federal requirements for safeguarding sensitive information within contractor systems. All activities must be accurately documented to demonstrate adherence to the specified framework and to support potential audits or evaluations by defense authorities. The work is structured as a subcontract under the Department of Defense, with performance taking place in Tampa, Florida, at the ZIP code 33621. The solicitation falls under NAICS code 541512, indicating it pertains to computer systems design services. The deadline for responses is August 3, 2026, with the solicitation originally posted on July 22, 2026. The contract is administered by LSO Combat Vehicles and Armament and must be executed in alignment with DIBBS procurement procedures as referenced by the provided UI link. No set-aside preferences or organization type restrictions are specified, making it open to qualified subcontractors meeting the technical and compliance requirements.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488510
New
DIBBS
Transportation & Delivery to Overseas DestinationThe contract requires the Arrange and execute international freight transport of packaged supplies to Al Dhafra Air Base in the United Arab Emirates under FOB Origin terms, meaning the supplier is responsible for delivery to the origin point, and all costs and risks thereafter fall to the buyer. The transportation services must be performed under a subcontract arrangement with a NAICS code of 488510, which classifies the work as support activities for air transportation, indicating the need for specialized logistics coordination for airfreight or multimodal shipments. Performance is tied to the Tampa, Florida area, serving as the operational hub for preparing and dispatching the cargo, even though the final destination is overseas. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, giving interested parties a limited window to submit proposals. The contracting entity is the LSO Combat Vehicles and Armament office under the Department of Defense, underscoring the military nature of the shipment, likely involving sensitive or defense-related equipment. The place of performance being in Tampa suggests the supplier must coordinate with a U.S.-based logistics center for packaging, documentation, and outbound movement, while ensuring full compliance with international shipping regulations, export controls, and military delivery standards for the final destination in the UAE.
Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Notification ServicesThe contract requires the detection and notification of radioactive materials in shipments using instrumentation that is NIST-traceable and adheres to Department of Defense reporting standards. The work involves monitoring cargo and transport networks to identify unauthorized or unexpected radioactive substances, ensuring timely alerts are sent to government entities in compliance with federal security protocols. All equipment and procedures must meet rigorous accuracy and calibration benchmarks to guarantee reliable detection and minimize false positives or negatives. The contract is structured as a subcontract under NAICS code 541380 and is associated with the Department of Defense’s LSO Combat Vehicles and Armament division. Performance is to occur in Tampa, Florida, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. Contractors are expected to have proven experience in radiation detection systems, government-compliant reporting frameworks, and the ability to integrate with DoD supply chain surveillance operations. Failure to meet detection thresholds or reporting timelines may result in contract non-compliance or termination.
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Identification & LabelingThe contract requires the identification of hazardous materials within shipments and the accurate application of labels compliant with OSHA’s Hazard Communication Standard 29 CFR 1910.1200, ensuring all chemical hazards are properly communicated through standardized labeling practices. This includes the generation of Safety Data Sheets (SDS) and the pre-award submission of labels for review and approval, which are critical to meeting regulatory requirements before any materials are transported or handled. The work demands a thorough understanding of chemical classification, labeling criteria, and documentation procedures to ensure full compliance and safety across the supply chain. The contract is a subcontract under the NAICS code 541620, associated with environmental consulting services, and is issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT. The place of performance is in Tampa, Florida, with a response deadline of August 3, 2026. Although the solicitation number and point of contact are not provided, the UI link directs to the DIBBS platform where full details may be accessed. The absence of a set-aside designation suggests the opportunity is open to all eligible contractors without preference, and all work must align with federal hazardous material handling standards applicable to defense-related logistics.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323117
New
DIBBS
Military Shipment Marking & LabelingThe contract requires the application of standardized markings and labels to military shipments in strict compliance with MIL-STD-129, ensuring all packages are properly identified with barcodes, handling codes, and storage instructions to support end-to-end logistics tracking. This work is critical for maintaining supply chain integrity and operational readiness across defense networks, with all labeling executed to exact technical specifications to ensure compatibility with military logistics systems. The performance location is designated as Tampa, Florida, with a zip code of 33621, and the work falls under NAICS code 323117, indicating it involves printing and related support activities for defense applications. This is a subcontract opportunity issued by the Department of Defense under the LSO Combat Vehicles and Armament organization, with a response deadline of August 3, 2026, and a posted date of July 22, 2026. The solicitation is part of a broader effort to unify labeling practices across defense shipments, reducing errors and improving asset visibility. While no set-aside type is specified, bidders must be prepared to meet all federal and military compliance standards, including accuracy in data encoding, durability of labels under environmental stress, and adherence to the latest revision of MIL-STD-129. Failure to comply with marking requirements may result in shipment rejection or delays in critical equipment deployment.
Books Printing

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Military-Compliant Packaging ServicesThe contract requires the packaging of military supplies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards to ensure environmental protection and transport durability under demanding operational conditions. All packaging activities must meet military-grade specifications for material selection, labeling, cushioning, sealing, and configuration to safeguard equipment during storage, handling, and shipment across varied climates and terrains. The work is classified as a subcontract and is tied to the NAICS code 326199, indicating non-specific plastics product manufacturing, which aligns with custom packaging fabrication or assembly tasks. Performance is designated to occur in Tampa, Florida, with a zip code of 33621, and the procuring agency is the Department of Defense under LSO COMBAT VEHICLES AND ARMAMENT. The solicitation was posted on July 22, 2026, with a mandatory response deadline of August 3, 2026, emphasizing a limited window for submission. Contractors must be prepared to demonstrate capability in military packaging protocols, compliance documentation, and adherence to defense supply chain requirements without relying on set-aside provisions.
All Other Plastics Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Assessment SupportThe contract seeks support for achieving CMMC Level 2 certification by implementing NIST SP 800-171 security requirements, safeguarding systems against cyber threats, and establishing robust cyber incident reporting procedures. This subcontract is focused on ensuring compliance with federal cybersecurity standards for defense contractors, requiring the contractor to provide expert guidance and operational support throughout the certification process. The work is tied to the Department of Defense and will be performed at Camp Pendleton, CA, with a target completion deadline for proposals set for August 3, 2026. The contract falls under the NAICS code 541512 for computer systems design services and is issued by LSO Combat Vehicles and Armament under a solicitation framework managed by the Defense Logistics Agency. Participation requires thorough understanding of DoD cybersecurity mandates and the ability to align technical controls with CMMC framework controls.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and submission of hazard labels and Safety Data Sheets compliant with OSHA regulations for hazardous materials used in defense applications, ensuring adherence to federal safety and communication standards. The work is tied to the Department of Defense under the organization LSO COMBAT VEHICLES AND ARMAMENT, with performance designated at Camp Pendleton, California, 92055-5351, indicating the need for precise alignment with military-grade hazardous material handling protocols. The solicitation falls under NAICS code 541690, classifying it as other scientific and technical consulting services, and is structured as a subcontract opportunity with a response deadline of August 3, 2026. All deliverables must meet strict regulatory requirements to support operational safety and regulatory compliance across DoD installations.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract seeks comprehensive military-compliant packaging, preservation, and marking services to ensure the integrity and longevity of defense-related equipment during storage and transport. Services must incorporate corrosion-inhibiting materials and adhere strictly to DLA RP001 standards for palletizing, ensuring all items are properly protected against environmental degradation and handling damage. The work is tied to the Department of Defense under the LSO COMBAT VEHICLES AND ARMAMENT organization, with performance required at CAMP PENDLETON, CA, 92055-5351. This is a subcontract opportunity classified under NAICS code 493190, and responses are due by August 3, 2026. All offerings must meet rigorous military specifications to maintain operational readiness and compliance with federal supply chain protocols.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336340
New
DIBBS
Window Washer Reservoir Supply (NSN: 2540016698155)The contract seeks the supply of two units of a window washer reservoir identified by NSN 2540016698155, requiring full compliance with military packaging, labeling, and delivery standards to ensure suitability for defense operations. The item must be delivered to the specified place of performance at Camp Pendleton, California, with the zip code 92055-5351, under the authority of the Department of Defense through the LSO Combat Vehicles and Armament organization. The solicitation falls under NAICS code 336340, indicating it is related to other transportation equipment manufacturing, and is classified as a subcontract opportunity with no set-aside provisions. The posting date is July 22, 2026, and responses must be submitted by the deadline of August 3, 2026. All deliverables are expected to meet rigorous military specifications without deviation, though no point of contact is listed within the provided data. Further details can be accessed via the official DIBBS portal linked in the contract information.
Motor Vehicle Brake System Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 ImplementationThis contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information against unauthorized access, disclosure, or compromise. The effort must fully align with DFARS 252.204-7012, specifically including adherence to cyber incident reporting obligations, ensuring any security breaches or potential compromises are promptly identified, documented, and reported in accordance with federal requirements. The work is scoped as a subcontract under a total small business set-aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 541512 indicates the nature of the work falls under computer systems design and related services. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, and is administered by the Department of Defense under LSO Combat Vehicles and Armament, though specific performance location and point of contact details are not provided. The contract is accessible via the DIBBS portal for further procurement information.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS PreparationThe contract requires the identification of hazardous materials in shipped items, the preparation and accurate submission of Safety Data Sheets, and full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7006. All work must ensure that hazardous substances are properly classified, labeled, and documented to meet federal safety and defense supply chain requirements. The contractor is expected to maintain rigorous standards for material safety documentation and regulatory adherence across all delivered goods. This is a subcontract set-aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on July 22, 2026, with proposals due by August 6, 2026. The contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, and performance is tied to defense logistics and supply chain operations. Compliance with OSHA and DFARS criteria is mandatory, and failure to meet documentation or regulatory obligations may result in contract non-compliance.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details