Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PACKING ASSORTMENT,

Active
SPE7L3-26-T-115WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the packing assortment for items identified by NSN 5330-01-453-8359 with a quantity of 34 units, subject to a delivery requirement of 81 days after award. The solicitation, SPE7L3-26-T-115W, is open for competition and includes stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect at the solicitation issue or award date. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, ensuring medium duty, waterproof, greaseproof, and opaque containment to protect items susceptible to UV degradation. The use of asbestos is strictly prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval chemical reagents, with portable devices required to include shockproof design and secondary containment per NAVSEA 5100-003D. Identification of U.S. military property must follow MIL-STD-130N, and government identification must be removed from non-accepted supplies. Sampling follows MIL-STD-1916 or comparable zero-defect plans, with acceptance criteria demanding zero non-conformances unless otherwise stipulated, and attributes are assigned verification levels based on criticality. Export control applies due to technical data subject to ITAR or EAR, restricting disclosure to foreign persons without prior authorization; access is limited to contractors with JCP certification, completed DOD export training, and DLA approval. All deliveries are to be made to Tracy, California, with point of contact Susan Diamond at DLA for inquiries.

General Info

34 units of NSN 5330-01-453-8359 delivered in 81 days per MIL-DTL-117 Type II, Class C, zero-defect sampling, ITAR/EAR controlled, to Tracy, CA.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-115W for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PACKING ASSORTMENT,
PACKING ASSORTMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
SPE7L3-26-T-115W
SECTION B
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5330-01-453-8359 Quantity: 34 SE Purchase Request: 7017436965QTY: 34 Delivery: 81 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThe contract specifies the procurement of 100 plain hexagonal nuts with NSN 5310-01-436-7220 under solicitation SPE4A6-26-T-05LW, with a required delivery within five days of award and delivery terms FOB destination. All supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, including preservation method code 10 per ASTM D3951, and are subject to zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Mercury and mercury-containing compounds are strictly prohibited in all aspects including preservation, packaging, and marking except for specific functional applications approved by NAVSEA, and portable devices containing mercury must include secondary containment. The nuts must be delivered to the designated government address at FPO AP 96349, with detailed transportation instructions governed by DLAD Proc Notes C19 and C20. The contract enforces strict source approval documentation, physical item marking, and adherence to the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The purchase request is identified as 7017185255, with a required delivery date of June 17, 2026, and the point of contact for inquiries is Ashley Jones-Turner, responsible for oversight by the ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, SELF-LOCKINGThe contract pertains to the procurement of four self-locking studs with NSN 5307-01-320-4090 under solicitation SPE4A6-26-T-05MJ, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 20 days after order placement, and responses must be submitted by July 20, 2026. Technical and quality standards referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to stringent export control under ITAR or EAR regulations, restricting technical data disclosure to authorized entities, including foreign nationals within the U.S., and requiring strict compliance with DFARS 252.225-7048. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and questionnaire, may access controlled technical data. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and compliance with Cybersecurity Maturity Model Certification Level 2, which mandates both a self-assessment and certification by an accredited third-party assessment organization. All information is classified as covered defense information and must be handled accordingly.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of two hexagon cap screws identified by part number 23-09744-150 from Daimler Truck North America LLC and NSN 5305-01-328-4387, classified as a commercial off-the-shelf item. The screws must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively, while unspecified attributes are treated as major, and acceptance requires zero non-conformances unless otherwise stipulated. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, materials, and packaging codes, and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA packaging standards, and delivery is FOB origin within ten days to the specified destination in Mason City, Iowa. Shipment must be sent by the fastest traceable means, excluding parcel post, with the freight and delivery points identical and designated under RDD 555 and project TP 2. The contract specifies a fixed quantity of two units with zero variance allowed, inspection and acceptance occur at destination, and the original required delivery date is April 8, 2026. All requirements are subject to the governing revision of the DLA Master List as of the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTTThis contract specifies the procurement of a self-locking, slotted hexagonal nut, identified by NSN 5310-00-785-1755 and part number MS17825-3, manufactured to meet the current revision of the governing military and consensus standards, including MIL-STD and NASM25027. The item is classified as a commercial item and is subject to stringent quality and technical requirements from the DLA Master List, including tailored quality provisions, inspection and acceptance at origin, and mandatory physical identification markings per MIL-STD-130N and RQ017. Acceptance criteria require zero non-conformances under zero-based sampling plans governed by MIL-STD-1916 or ASQ H1331, with specified verification levels for critical, major, and minor attributes. The item has no shelf life requirement, and government identification markings must be removed from non-accepted items. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 requirements, and each unit must be clearly marked with the NSN, contract number, lot number, and manufacturer and contractor CAGE codes. The contract awards two line items totaling 1,074 units, delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the point of manufacture. Delivery schedules are strictly defined with two distinct shipment timelines—one requiring shipment by December 3, 2026, for delivery to Tinker AFB, Oklahoma, and the other by February 9, 2027, for delivery to Texarkana, Texas, both following a 135-day delivery window from the solicitation date. All packaging and labeling must conform to DLA’s technical directives, overriding any conflicting commercial standards. The solicitation number is SPE4A6-26-T-05MV, issued by the Department of Defense’s ASC Commodities Division, with Deborah Jordan as the primary point of contact. The item is designated as a critical application component, and compliance with all referenced technical documents, including TDP Rev D Gen 4 and QAP EQ003, is mandatory for acceptance.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPINGThe contract pertains to the procurement of a single tapping screw with NSN 5305012433751 and part number 86642312, quantity one unit, under solicitation SPE4A6-26-T-05LM. Delivery is required within ten days FOB origin to Fort McCoy, Wisconsin, with inspection and acceptance occurring at the destination. The item must be packaged in compliance with ASTM D3951, while all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and the unit of issue is one each. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. The supplier must use traceable shipping methods and avoid parcel post, with shipment identified by RDD E and project code 9GQ TP 2. The purchase request number is 7017403634, and the original required delivery date is July 6, 2026. All technical and quality provisions referenced by R or I numbers are governed by the DLA Master List as of the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details