Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on March 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PACKING, PREFORMED

Closed
SPE4A7-26-T-112NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-101U
Solicitation SPE7L1-26-T-101U is issued by the DLA Land and Maritime Land Supply Chain for the procurement of 13 O-rings, identified as critical application items under NSN 5331012670108. Approved sources include Parker-Hannifin Corp (P/N P-84444-13) and Curtiss-Wright Flow Control Corporation (P/N PD41047 Item 13). The contract requires delivery within 194 days after order, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The items must adhere to strict material restrictions, specifically prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, requiring the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold. The solicitation incorporates various FAR and DFARS clauses regarding equal opportunity, waste reduction, and cybersecurity standards, including NIST SP 800-171. Offerors must submit quotations by February 27, 2026, and provide a complete data package if proposing alternate parts.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

This contract is for the supply of 1,371 each of preformed packing, identified under NSN 5330-00-887-2095, to be delivered to the Defense Logistics Agency Distribution Center in Albany, Georgia. The delivery is scheduled with a lead time of 226 days, with a required ship date of November 8, 2026, and original required delivery by November 9, 2026. The packing must comply with MIL-STD-2073-1E standards for packaging, including specific requirements for moisture, grease, and UV protection, and must be marked in accordance with MIL-STD-129. The contract designates the terms for packaging, palletization, and preservation, referencing DLA packaging rules and federal supply classifications to ensure the protection and identification of the items. The contract incorporates technical and quality requirements detailed in the DLA Master List, including Cybersecurity Maturity Model Certification Level 2 self-assessment, physical identification, and removal of government markings on non-accepted supplies. Sampling and inspection protocols are governed by MIL-STD-1916 or equivalent standards, with the acceptance testing performed at the destination. The documentation also restricts dissemination of technical data to foreign nationals and mandates vendor compliance with security protocols. Transportation and shipping instructions are provided, with the destination set as DLA Distribution Albany, and the contract is managed under solicitation SPE4A7-26-T-112N with contact information for the primary government point of contact.

General Info

Supply of 1,371 preformed packings to DLA Albany, delivery by Nov 2026, MIL-STD compliant.

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

1

SPE4A7-26-T-112N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
PACKING,PREFORMED
PACKING,PREFORMED
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
THIS ITEM CONTAINS TECHNICAL DATA THAT IS NOT RELEASABLE TO FOREIGN
NATIONALS. TO ACCESS THE RESTRICTED TECHNICAL DATA VENDORS ARE REQUIRED
TO COMPLETE AND RETURN THE FORM LOCATED IN THE "FOREIGN SECURE" FOLDER
AVAILABLE AT https://pcf1x.bsm.dla.mil/cFolders
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
HAMILTON SUNDSTRAND CORPORATION 73030 P/N 537871
SPE4A7-26-T-112N
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015913341 0001 EA 1,371.000
NSN/MATERIAL:5330008872095
DELIVERY (IN DAYS):0226
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A7-26-T-112N
SECTION B
PR: 7015913341 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
Need Ship Date:11/08/2026 Original Required Delivery Date:11/09/2026
SPE4A7-26-T-112N NSN/Part Number: 5330-00-887-2095 Quantity: 1,371 EA Purchase Request: 7015913341QTY: 1371 Delivery: 226 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE4A7-26-T-805Q
Solicitation SPE4A7-26-T-805Q is a fixed-price request for quotations issued by DLA Aviation for the procurement of 37 fluid filter heads under NSN 1650007564991. The government specifically requires part number AC1768-61D1 or AC176861D1; part numbers with an S prefix, such as SAC1768-61D1, are excluded unless the regular part number is also clearly marked on both the item and its packaging. Delivery is specified as FOB Origin with a required delivery date of September 30, 2027, and a need ship date of March 17, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including standards for source approval, configuration change management, and measuring equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA master requirements taking precedence. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DIBBS portal, and the award process may be automated. Additionally, the procurement is subject to NAICS 336413 size standards, Buy American Act restrictions, and requires the use of the Wide Area Workflow system for electronic invoicing and payment.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDER
Solicitation # SPE4A7-26-T-724X
Solicitation SPE4A7-26-T-724X is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of four shoulder bolts, identified by NSN 5306-01-454-8637. The requirement is managed by the ASC Supplier Oper AE and AF Division, with Naron Sanderlin serving as the primary point of contact. Delivery is scheduled for March 8, 2027, with a final required delivery date of November 29, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is issued under the First Destination Transportation (FDT) program, and offers must be submitted as FOB Origin. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place against the use of mercury or mercury-containing compounds in preservation and packaging. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information. Offerors must be registered in the System for Award Management (SAM) and submit quotes through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS