Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PACKING, PREFORMED

Active
SPE4A6-26-T-26LQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of two units of preformed packing under part number 5330-01-043-1258. The contract requires delivery within 482 days after receipt of the order. It mandates strict adherence to DLA technical and quality requirements, including specific packaging standards, configuration change management, and the use of approved sampling methods such as MIL-STD-1916 or ASQ H1331. The agreement includes critical safety and security mandates, such as the application of Covered Defense Information and CMMC Level 2 self-assessment. It strictly prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components like batteries or sensors. While Item Unique Identification is not required by the service customer, the contractor must comply with all specified measuring, test equipment, and source approval documentation requirements.

General Info

DoD procurement of two preformed packing units delivered within 482 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
BREA WHITE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PACKING,PREFORMED
PACKING PREFORMED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE4A6-26-T-26LQ
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5330-01-043-1258 Quantity: 2 EA Purchase Request: 7018067719QTY: 2 Delivery: 482 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-159A
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 33 units of preformed packing under part number 5330-01-652-7618. The contract requires delivery within 168 days after receipt of order and is categorized under NAICS code 339991. Performance is to take place in New Cumberland, Pennsylvania. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A6-26-T-26HW
This contract is for the procurement of one gasket, identified by NSN 5330-01-381-2551 and Northrop Grumman part number 156C604H01. The item is classified as a commercial product and must be delivered within 20 days. Delivery is FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the US Army in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and RP001. Because the item is subject to deterioration from ultraviolet rays, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the supplier must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L3-26-T-224L
This solicitation is for the procurement of 46 spiral wound gaskets, identified by part number M24716TYI53711-5787605-210 and NSN 5330-01-400-2797. The contract is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with a delivery requirement of 154 days after receipt of order. Performance is located in Tracy, California, and the solicitation is managed by Susan Diamond. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements and MIL-STD-130N for identification marking. Critical material restrictions are in place, explicitly prohibiting the intentional addition of mercury or mercury-containing compounds and requiring all supplied items to be completely free of asbestos. Compliance with the DLA Master List of Technical and Quality Requirements and FAR 52.246-15 certificate of conformance procedures is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-405H
This solicitation, issued by the Department of Defense ASC Supplier OEM Division, is for the procurement of five O-rings under National Stock Number 5331-00-252-6045. The contract requires delivery within five days after the order is placed. The procurement is governed by NAICS code 339991 and is managed by primary point of contact Patrick Oconnor. The supplier must adhere to specific technical and quality requirements as outlined in the DLA Master List, including strict packaging standards and the removal of government identification from non-accepted supplies. Additionally, the contract mandates that all items be free of asbestos and prohibits the use of Class I ozone-depleting chemicals, requiring any substitute chemicals to be submitted for official approval.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-224F
This contract, identified as solicitation SPE7L3-26-T-224F, is for the procurement of 17 units of preformed packing, specifically NSN 5330-01-034-2802. The items are critical application parts associated with Todd Combustion Inc. The delivery is required within 140 days, with a need ship date of February 2, 2027, to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129. Due to the potential for deterioration from ultraviolet rays, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions, and requires compliance with hazardous materials shipping regulations.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-224N
This contract is a solicitation for the procurement of 32 units of nonmetallic special shaped section seals, identified by NSN 5330-01-410-9795. The requirement is issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with a delivery timeline of 154 days after the order is placed. The procurement is subject to full and open competition and adheres to specific technical and quality requirements outlined in the DLA Master List. Key compliance mandates include the strict prohibition of asbestos and the requirement for items to be free of government identification if not accepted. Packaging must follow MIL-DTL-117 standards using waterproof, greaseproof, and opaque bags to prevent UV deterioration. Additionally, the items must have at least 85 percent of their stated shelf life remaining upon delivery, specifically requiring 31 months of shelf life at the time of receipt at the government depot. Identification marking must comply with MIL-STD-130N.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, CABLE
Solicitation # SPE7L3-26-T-223Z
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one cable seal under National Stock Number 5330-01-599-5818. The contract requires delivery within 20 days after the order is placed, with performance located at Fort Hood, Texas. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. Due to the potential for ultraviolet degradation, the item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117 specifications. Additionally, all supplied items must be completely free of asbestos.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-153F
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 572 feet of nonmetallic special shaped section seals under NSN 5330-01-196-2312. The contract requires the items to be manufactured in 800 foot lengths and strictly prohibits the use of asbestos as defined in FED-STD-313. Delivery is required within 168 days after the order is placed, with the place of performance located in Barstow, California. The procurement is subject to specific DLA packaging requirements and technical quality standards outlined in the DLA Master List. Additionally, the contract specifies the removal of government identification from any supplies that are not accepted. This solicitation falls under NAICS code 339991 and is managed by the primary point of contact, Susan Diamond.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A5-26-T-404V
This solicitation from the Department of Defense, issued by the ASC Supplier Oper OEM Division, is for the procurement of 921 gaskets under part number 5330-00-390-1573. The contract requires delivery within 409 days after the order is placed. Performance is centered in San Diego, California, and the procurement falls under NAICS code 339991. The contract mandates strict adherence to various technical and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Inspection and acceptance will occur at the origin, and the contract incorporates specific guidelines for configuration change management and the handling of covered defense information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7M4-26-T-380U
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-224A
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A1-26-T-2734
AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
Supply of Recessed Washers (NSN 5310-01-052-0743)
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Marking Services
Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
Manufacture and Supply of RF Cable Assemblies (NSN 5995-01-614-5111)
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423430
New
DIBBS
Hardware Component Distributor
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Nut Assembly Manufacturer
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CASTELLATED,
Solicitation # SPE4A6-26-T-26NR
This contract, identified as SPE4A6-26-T-26NR, is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of two plain castellated hexagon nuts, identified by NSN 5310-01-668-3781. The delivery is required within five days after the order, with a required delivery date of September 2, 2026. The items are to be delivered FOB Origin and will be inspected and accepted at the destination in Jacksonville, Florida. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RA001, RC001, RP001, and RQ011. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Shipping must be conducted via the fastest traceable means to the Maritime Prepositioning Force in Jacksonville, and the use of parcel post is explicitly prohibited.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, BALL
Solicitation # SPE4A6-26-T-26KL
This contract is for the procurement of four ball bearing units, identified by NSN 3130016948830 and part number 2212-2504. The order requires delivery within 20 days of order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination in Egg Harbor Township, New Jersey. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA packaging requirements for procurement. A critical requirement of this solicitation is the restriction on the acquisition of ball and roller bearings, mandating that the items be manufactured in the United States, its outlying areas, or Canada. Additionally, the cost of components manufactured in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award.
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-26JH
This contract is for the procurement of 15 rolls of Type I, Class 2 electrical insulation tape, identified by NSN 5970-00-139-5157. Each roll consists of 108 feet of tape with a width of 0.750 inches and a 3.00 inch inner core. The item is designated as a critical application commercial item with a 12-month extendable shelf life. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy. Delivery is set for FOB Origin to Tinker AFB, with a required delivery date of August 31, 2026, and a delivery window of 5 days after receipt of order.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-Q-1403
This contract is for the procurement of 1,131 self-locking hexagon nuts, identified as a Navy Critical Safety Item and a Critical Application Item. The delivery is required within 225 days after order, with inspection and acceptance occurring at the point of origin. The items must adhere to strict quality and marking standards, including MIL-STD-129 and SAE AS9100, and require critical item source inspection. The agreement incorporates specific cybersecurity and documentation requirements, including CMMC Level 2 self-assessment and the handling of covered defense information. Packaging must comply with DLA requirements and MIL-STD-2073-1E, with final delivery to DLA Distribution San Diego. All requests for waivers or deviations must be approved by the DSC contracting officer.

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD END
Solicitation # SPE4A6-26-T-26JC
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 214 plain rod end bearings under NSN 3120-00-985-3761. The contract is a total small business set-aside under NAICS code 332991, with a delivery requirement of 171 days after order. Performance is to take place at Hill AFB. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging and inspection standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory training to access the data.
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMP, XENON
Solicitation # SPE4A6-26-T-26MR
This contract is for the procurement of two xenon lamps, identified by NSN 6240-01-430-4252 and part number 9795 from Carlisle and Finch Co. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-26MR. Delivery is required within 10 days after order, with a required delivery date of August 27, 2026. The items are to be shipped FOB Origin to the 524 CS BN CO A Composite at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the contract specifies that covered defense information may apply and requires the removal of government identification from any non-accepted supplies.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-26NM
This federal solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-26NM, is for the procurement of 60 socket head cap screws. The items are identified by NSN 5305-01-327-9683 and are associated with purchase request 7018121899. The contract requires delivery within five days after the order is placed, with the place of performance located in Tobyhanna, Pennsylvania. Interested parties must respond by the deadline of September 11, 2026. The primary point of contact for this requirement is Vincent Price.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details