Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

PAD, CUSHIONING

Awarded
SPE4A5-26-T-136LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded a simplified acquisition contract to BOEING DISTRIBUTION, INC. (CAGE 22819) for 234 units of PAD, CUSHIONING (NSN 1680014760724) under solicitation SPE4A5-26-T-136L, with an award date of June 23, 2026. The contract value is $690.30, though unit and extended pricing details are not disclosed in the available documentation. Delivery is required 171 days after award, with a need ship date of November 8, 2026, and an original delivery deadline of January 18, 2027. The sole place of performance is the DLA Distribution DDSP New Cumberland facility in New Cumberland, Pennsylvania, and delivery is FOB destination, with inspection and acceptance conducted at the destination under FAR 52.246-2. Packaging and marking must adhere to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, with full compliance to MIL-STD-129 for labeling, barcoding, and unit of issue accuracy. Preservation methods are not explicitly defined but are presumed covered by the DLA Master List. The contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003, and final acceptance requires zero non-conformances based on MIL-STD-1916 or comparable zero-based sampling. The contract incorporates numerous FAR and DFARS clauses, including cybersecurity requirements under 252.204-7012 and 252.204-7020 for safeguarding covered defense information and enforcing NIST SP 800-171 controls, as well as prohibitions on covered telecommunications equipment under 252.204-7018. Compliance with employment eligibility verification, combating human trafficking, sustainable procurement, and whistleblower rights is mandated. Invoicing must be submitted via WAWF with support available through the designated helpdesk. The contract type is unspecified but subject to deviation 2026-00038, allowing for potential alternative contract types. The solicitation referenced the DLA Master Solicitation for Automated Simplified Acquisitions Revision 104, requiring submission through DIBBS by

General Info

Procurement of 234 cushioning pads, delivered by January 18, 2027, under strict military specifications.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$690.3

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Awardee

BOEING DISTRIBUTION, INC.

Award Issued Date

Documents

2

Delivery Order SPE4A1-26-V-0986 for Cushioning Pad

PDF, High priority: read this firstdelivery-order
High

RFQ SPE4A5-26-T-136L DLA Aviation May 13 2026

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → Defense Logistics Agency
Office AddressUSA
Contacts
Brandy Coward
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DLA award SPE4A126V0986 posted on DIBBS. Awardee: BOEING DISTRIBUTION, INC. (CAGE 22819) Total Contract Price: $690.30 Award Date: 06-23-2026 Solicitation: SPE4A5-26-T-136L Line items: - PAD, CUSHIONING (NSN/Part 1680014760724, PR 7016752409)

Similar Contracts

Same NAICS industry code

NAICS: 326150
New
Federal
Polyisocyanurate (Polyiso) Thermal Board SupplyThis small business set-aside subcontract, managed by the Department of Defense W6QK Siad Contr Office, involves the supply and delivery of Polyisocyanurate thermal heat boards for prime contractors working on Sierra Army Depot projects. The scope of work requires the provision of 4x8 foot rigid foam insulation boards in two specific thicknesses, consisting of 592 units of 1/2 inch boards, including part number PIBDTS0548RM, and 144 units of 2 inch boards. The contract mandates strict compliance with DPAS ratings and specifies FOB Destination shipping to Herlong, California. Interested parties must adhere to the response deadline of November 5, 2026, for this procurement categorized under NAICS code 326150.
W6QK Siad Contr Office

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 326150
New
Federal
Thermal heat boards
Solicitation # W912GY27QA002
The Sierra Army Depot in Herlong, California, is seeking a firm-fixed price contract for the procurement of Polyisocyanurate thermal heat boards under solicitation W912GY27QA002. This requirement is a 100% Small Business Set-Aside under NAICS code 326150, with a size standard of 750 employees. The contract involves two line items: CLIN 0001 for 592 units and CLIN 0002 for 144 units, both of which must be delivered by December 30, 2026. The boards must be 8 feet in length by 4 feet in width, with CLIN 0001 specifically requiring manufacturer part number PIBDTS0548RM. Award will be granted to the responsible offeror based on the lowest price that meets all technical specifications. Offerors must be registered in the System for Award Management and submit quotes via SAM.gov using Standard Form 1449. The submission deadline is November 5, 2026. Delivery is FOB Destination to the Sierra Army Depot, with the contractor responsible for transportation costs. Inspection and acceptance will occur at the destination within seven days of receipt. Invoicing must be processed electronically through the Wide Area WorkFlow system. All technical and contractual inquiries should be directed to the contract specialist, Carolina Guerrero, or the contracting officer, Melissa Kaarbo, in writing at least seven calendar days before the closing date.
W6QK Siad Contr Office

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 326150
New
DIBBS
Vehicular Insulation SupplierThis subcontract opportunity is for a supplier to provide specialized vehicular insulation to prime contractors supporting the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider must manufacture or source insulation that adheres to NSN 2540-01-615-5525 and the DLA Master List of Technical and Quality Requirements. Strict adherence to the Buy American Act and the Berry Amendment is required for this procurement. The scope of work involves the delivery of one unit of vehicular insulation to Fort Bliss, Texas. All materials must be packaged according to ASTM D3951, marked in accordance with MIL-STD-129, and palletized per RP001 standards. Interested parties must submit their responses by November 5, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 326150
New
SLED
Open Cell Foam Joint System
Solicitation # MODOT SL 0000000089SL
The Missouri Department of Transportation St. Louis District is soliciting bids for a Blanket Purchase Agreement to provide an Open Cell Foam Joint System. The contract period runs from the date of award through October 31, 2027, with the option for two additional one-year extensions. The required system must be supplied by a single manufacturer and include cellular polyurethane foam impregnated with hydrophobic polymer and fuel-resistant silicone, field-applied epoxy adhesive primer, and silicone sealant bands. Technical specifications require a working range of 50 percent in both tension and compression, a temperature service range of -40 to 185 degrees Fahrenheit, and UV resistance for 2000 hours. Awards will be granted to the lowest and best bid that complies with all mandatory specifications, Missouri statutes, and Executive Orders. Evaluation factors include price, vendor responsibility, and specific preferences, including a 10 percent preference for products meeting the Domestic Products Procurement Act. Bidders must submit their responses via the MissouriBUYS Bid Board by November 6, 2026, and include a signed Exhibit A and detailed product descriptions. Shipping must be provided as FOB destination freight prepaid, with all packing and handling charges included in the bid price. The contract includes standard clauses regarding nondiscrimination, warranties, and indemnification, and requires compliance with the Anti-Discrimination Against Israel Act for contracts exceeding 100,000 dollars.
MODOT ST LOUIS DISTRICT

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 326150
SLED
Bituminous Membrane & Sealant SupplierThis subcontract agreement establishes a supplier for specialized roofing materials to support prime contractors on San Diego County Water Authority facility projects. The scope of work involves providing bituminous membranes, 22 gauge metal, Garland Grip Polyester Soft, and Garland Tuff-Stuff MS True White urethane sealant. All materials must be delivered in original sealed packaging to either the project site or designated offsite storage and must be backed by a 30-year manufacturer's warranty. The contract is categorized under NAICS code 326150 and is associated with performance in Manchester. Interested parties must adhere to the response deadline of November 18, 2026. This arrangement ensures that critical waterproofing and flashing components meet specific quality standards for infrastructure projects managed by the California agency.
San Diego County Water Authority

POSTED

12 days ago

DEADLINE

in 21 days
View Details
NAICS: 326150
International
Supply of Monel Disc Butterfly ValvesThis subcontract involves the supply of 16 butterfly valves featuring Monel discs for prime contractors working on Department of National Defence projects for HFX Class ships. The scope specifically covers part numbers BD-008877-30 for 4 inch valves and BD-008877-140 for 5 inch valves, intended for use in foam systems and seawater service. Performance will take place in British Columbia and Nova Scotia. To ensure quality and durability, the supplier must maintain ISO 9001:2015 certification and conduct shock testing according to Specification D-03-003-007/SG-000 Grade 1 Type A for any equivalent products. All delivered valves must be packaged in accordance with MIL-STD-2073 or NATO standards. The response deadline for this opportunity is November 16, 2026.
Department of National Defence

POSTED

12 days ago

DEADLINE

in 19 days
View Details
NAICS: 326150
SEAT-VL URETHANE — 4820000543850 — N0010426QNE45
Solicitation # N0010426QNE45
Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). This item is designated as Special Emphasis material Level I Scope of Certification because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The material must be mercury-free and satisfy toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The contract mandates rigorous quality assurance and traceability standards. The contractor must maintain a quality system compliant with ISO 9001 and calibration standards such as ISO 10012 or ANSI-Z540.3. Full traceability from raw material to the finished component is required, with permanent marking per MIL-STD-792 on the outer cylindrical surface. Key deliverables include a Certificate of Compliance and material certification test reports submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The resulting award will be bilateral and includes a one-year warranty from the date of delivery.
Navsup Weapon Systems Support Mech

POSTED

27 days ago

DEADLINE

in 5 days
View Details
NAICS: 326150
Federal
Engine Inlet Bellmouth Housing FabricationThis subcontract involves the fabrication of the Engine Inlet Bellmouth Housing, Male (Part Number: 4106AS0275), supporting prime contractors for the Navy NAWC PMA-262/MQ-4C Program Office. The project requires the use of urethane or specialized foam molding processes to engineer components specifically for the AE3007H Turbofan Engine Inlet, utilizing molding equipment designed for aircraft maintenance specialized equipment. Managed by the Navair Warfare Ctr Aircraft Division under the Department of Defense, the work is performed in Lakehurst. The opportunity was posted on September 2, 2026, with a response deadline of November 1, 2026, and falls under NAICS code 326150.
Navair Warfare Ctr Aircraft Division

POSTED

about 2 months ago

DEADLINE

in 4 days
View Details
NAICS: 326150
Federal
Engine Inlet Bellmouth Housing, Male
Solicitation # N68335-26-R-1113
The Naval Air Warfare Center Aircraft Division, specifically the PMA-262/MQ-4C Program Office, is issuing a sources-sought Request for Information (RFI) under solicitation number N68335-26-R-1113. The agency is seeking industry feedback and manufacturing capabilities for the Engine Inlet Bellmouth Housing, Male (Part Number 4106AS0275), which is a high-impact polyurethane molded component used in the AE3007H Turbofan Engine Inlet assembly for ground operations. Manufacturing must align with the Navy Technical Data Package and 3D CAD data file 3673310M01110-11. If a contract is eventually awarded, the Navy intends to provide the existing part mold as Government Furnished Equipment. Interested respondents must submit a PDF response of no more than 10 pages by November 1, 2026, at 5:00 P.M. EST. Submissions must include administrative details, business size and type, company experience in molding similar items, and non-binding Rough Order of Magnitude cost estimates and schedules for quantities of 1, 5-10, and 20 or more units. This RFI is for information and planning purposes only and does not constitute a formal request for proposal or a commitment by the government to award a contract.
Navair Warfare Ctr Aircraft Division

POSTED

about 2 months ago

DEADLINE

in 4 days
View Details
NAICS: 326150
SLED
Paving and Base Material SupplyThis subcontract agreement involves the supply and delivery of paving and base materials for prime contractors working on Glenn County Public Works Agency projects. The scope of work specifically includes the provision of asphalt concrete, crushed aggregate, and stabilized base materials to be delivered to project sites located on County Road 27 in Orland. All supplied materials must strictly adhere to the specifications established by the State of California or the Glenn County Department of Public Works. The contract focuses on the delivery of required quantities of these materials to ensure the successful completion of infrastructure projects within the agency's jurisdiction.
Glenn County

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 326150
DIBBS
Polymer Foam Supply – 2" Thick, 42" W x 108" LThis subcontract with the Defense Logistics Agency involves the supply of commercial off-the-shelf gray polymer foam measuring 2 inches thick, 42 inches wide, and 108 inches long. The materials must adhere to ASTM packaging standards and comply with DFARS regulations regarding the absence of PFAS. The agreement is categorized under NAICS code 326150 and was posted on August 11, 2026. This procurement is managed by the Department of Defense to ensure the delivery of compliant packaging materials for agency operations.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 326150
DIBBS
Cushioning Pad Supply and DeliveryThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of 3,299 feet of military-spec cushioning pad, identified by part number 497A63805-1 and national stock number 5340-01-417-8642. The materials must adhere to strict quality and packaging standards, including MIL-STD-2073-1E, MIL-STD-129, and ISO 9001:2015. The final delivery is required to be made to DDSP New Cumberland, Pennsylvania, by March 29, 2027. The procurement falls under NAICS code 326150 and was posted on August 10, 2026.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 423830
New
DIBBS
Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.
All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.
Paint and Coating Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
DIBBS
Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332322
New
DIBBS
Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.
Sheet Metal Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 326150
Awarded
Federal
81mm Support Assembly
Solicitation # W519TC26DA020
W6QK Acc-Ri

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
FOAM ROLLER, PHYSICA
Solicitation # SPE2DH-26-T-4537
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
SYNTACTIC FOAM
Solicitation # SPE4A626FCWS1
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
FOAM, GR POLY, 2" TH X 24" W X 108" L
Solicitation # SP3300-26-D-0006
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L026F4774
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
FOAM, GR POLY, 2" TH X 24" W X 108" L
Solicitation # SP3300-26-D-0008
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
PLANK, WH FOAM, 1" TH X 48" W X 108" L
Solicitation # SP330026D0007
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
42--LIFE,PRESERVER,FAST
Solicitation # SPE8E9-26-T-2640
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Awarded
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L5-26-T-3881
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Closed
DIBBS
HEADREST, OPTICAL IN
Solicitation # SPE7M1-26-T-121T
MARITIME SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 326150
Awarded
DIBBS
PADDING, WINDSHIELD
Solicitation # SPE4A726F8139
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 326150
Closed
DIBBS
POUCH, LIQUID ABSORB
Solicitation # SPE2DH-26-T-4511
Defense Logistics Agency

POSTED

5 months ago

CLOSED

4 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS