Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PAD, HOIST ADAPTER, G

Active
SPE8EF-26-Q-0148Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three PAD, HOIST ADAPTER units with the NSN 1730-01-129-3576 under solicitation SPE8EF-26-Q-0148, with a delivery requirement of 60 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign national employees and subsidiaries; DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and successful review of the DLA Export-Controlled Technical Data Questionnaire are permitted access to this data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and adherence to Cybersecurity Maturity Model Certification Level 2 standards through a certified third-party assessment organization. Covered defense information requirements are in effect, and the point of contact for inquiries is Russell Keiser with the Department of Defense, Construction & Equipment Manu & Con.

General Info

Procure three HOIST ADAPTER units under ITAR/EAR controls with DLA export compliance, CMMC L2, and 60-day delivery.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8EF-26-Q-0148.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PAD,HOIST ADAPTER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-01-129-3576 Quantity: 3 EA Purchase Request: 7016935735QTY: 3 Delivery: 60 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
GUIDE, CARTRIDGE, AMMThe contract requires the delivery of eight cartridge guides, identified by NSN 1005-01-498-5154, under solicitation SPE7M0-26-T-020A, with a mandatory delivery deadline of five days after order date. The item is classified under a military procurement governed by stringent technical and quality standards referenced from the DLA Master List, and is subject to specific requirements including demilitarization protocols for Category I munitions, DLA packaging guidelines, and tailored quality controls applicable to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors holding approved U.S./Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire requirements. The solicitation is issued by the Department of Defense’s Maritime Supply Chain ESOB unit, with performance location in Everett, Washington, and the contractor must be certified at CMMC Level 2 as a third-party assessment organization. All data handling, distribution, and compliance obligations must adhere strictly to DLA export control policies and cybersecurity maturity requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
T-HANDLE OBSTRUCTIOThe contract pertains to the procurement of a T-HANDLE OBSTRUCTION REMOVER with NSN 1005-01-512-4361 and part number IP-555-5, under solicitation SPE7L7-26-T-4355. A total of 39 units are required at a unit price of $39.00, resulting in a total contract value of $1,521.00, with delivery mandated FOB origin within 282 days of the contract award. The product must be packaged in compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements which override any conflicting standards. Palletization must follow RP001 DLA Packaging Requirements, and all items must be marked and labeled as specified. The government has explicitly designated surplus as unacceptable for this NSN, and demilitarization procedures for Category I munitions items apply. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination, and delivery must be coordinated via the specified DLA distribution facility in New Cumberland, Pennsylvania. The required ship date is May 6, 2027, with no variance allowed in quantity. The contract is governed by DLA acquisition rules, with the applicable revision of the Master List determined by the solicitation issue date.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
LEVEL, PRECISION, VERTICThe contract solicitation SPE7L4-26-T-5635, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, seeks two units of a Level, Precision, Vertical Mount with NSN 1005-01-191-8884 for delivery to Redstone Arsenal, Alabama, within 20 days of order placement. The item is subject to stringent technical and quality requirements referenced through RQ and RD identifiers tied to the DLA Master List of Technical and Quality Requirements, including inspection and acceptance at the manufacturer’s origin, physical bare item marking, removal of government identification from non-accepted supplies, and configuration change management. The contract mandates compliance with DLA Packaging Requirements (RP001), ASTM D3951 for packaging, and MIL-STD-129 for labeling and barcoding, including GS1-128 and Data Matrix codes. Export control provisions under ITAR and EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program certification, completion of DLA export training, and formal DLA authorization. The contract includes a fixed-price structure with terms governed by FAR and DFARS clauses covering employment equity, trafficking prevention, cybersecurity safeguards, sustainable products, hazardous material handling per OSHA and MIL-STD-129, and NIST SP 800-171 DOD assessment requirements. Inspection is conducted at the origin by the government’s Quality Assurance Representative, with Product Verification Testing requiring five samples per subcontractor, one of which may be destroyed. The contractor must flow down all applicable requirements to subcontractors, including hazardous material labeling and export control obligations. Invoices must be submitted exclusively through Wide Area Workflow, and all entities must provide Unique Entity Identifiers and CAGE codes. While pricing is unlisted, the delivery window is fixed, with FOB Origin terms transferring title and risk upon shipment from the contractor’s facility, and no contract type or value is formally stated. The solicitation window closed on July 27, 2026, and proposals were submitted electronically via the DIBBS portal under the DLA Master Solicitation guidelines.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVThe contract pertains to the procurement of four units of a grooved coupling clamp with NSN 5342-01-092-8969, issued under solicitation SPE4A7-26-T-596X by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 20 days from the award date, FOB origin, with no tolerance for quantity variance, and inspection and acceptance are to occur at the origin. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. Palletization and packaging are subject to DLA’s broader packaging requirements, and the unit of issue is each. The item is to be delivered to the Taiwan Army at Zuoying Ammunition Subdepot in Kaohsiung City, Taiwan, with transportation logistics governed by DLA procedural notes C19 and C20. Technical and quality standards referenced are integrated from the DLA Master List of Technical and Quality Requirements, and sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract stipulates that no approved technical data package exists for this NSN, rendering the data proprietary or insufficient for competitive procurement, and any configuration changes or deviations require formal engineering change proposals or variance requests. The manufacturer, Voss Industries, LLC, is identified with part number 713201E-617-SB, and all quality verification levels must adhere to defined criteria for critical, major, and minor attributes with corresponding AQLs or verification levels. The required delivery date is June 4, 2026, and the solicitation response deadline is August 4, 2026. The contracting officer can be reached via Richard Ellery at DLA, and the procurement falls under NAICS code 332994. All performance, packaging, and documentation must align strictly with the referenced DLA and DoD standards, with no flexibility permitted absent formal approval.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
HEAD, REPLENISHER CYLINThe contract pertains to the procurement of 12 units of HEAD, REPLENISHER CYLINDER with NSN/Part Number 1015-00-532-3861 under solicitation SPE7L7-26-T-4309, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on July 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling for this simplified acquisition. The item is classified as a Category I munitions component under demilitarization guidelines, requiring strict handling and disposal protocols. Cybersecurity compliance is mandatory at CMMC Level 2, verified through certification by an approved third-party assessment organization. Packaging must adhere to DLA-specified standards, and the supplier must comply with tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposal or variance requests, and inspection and acceptance occur at the manufacturer’s origin. The item is not subject to Item Unique Identification per the requesting service’s direction, though physical marking on the bare item is required. Export control is strictly enforced under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals within the U.S., and requiring prior authorization from the Department of State or Commerce. Access to controlled technical data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training and DLA questionnaire approvals. All subcontractors and foreign subsidiaries are bound by these restrictions. The point of contact for inquiries is Charles Duncan of the Defense Logistics Agency, and the place of performance is unspecified but within the United States.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
BRACKET PULLEY SUPPORT
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
PIN, GROOVED, HEADLES
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
ANODE, CORROSION PRE
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
Federal
Solicitation: Pintle Mount Assembly (NSN: 1005-01-461-2656) - AmendedThis procurement is for a five-year Firm-Fixed-Price Indefinite-Delivery Indefinite-Quantity contract to supply the Pintle Mount Assembly (NSN: 1005-01-461-2656, Part Number: 12986102) under a sole-source 8(a) competition, with a five-year minimum obligation of 144 units and a maximum potential volume of 3,600 units across five ordering years, each estimated at 576 units. The contract is administered by the Army Contracting Command - Detroit Arsenal and will be performed at Anniston Army Depot, Alabama, with all deliveries FOB destination and transportation costs borne by the contractor. Bidders must possess prior access to the Technical Data Package (TDP), designated as Distribution Statement D, which contains critical specifications and is accessible only to Department of War and authorized U.S. DoD contractors via SAM.gov; failure to obtain TDP access will result in bid rejection. All bids must be submitted electronically by 1:00 p.m. local time on July 27, 2026, via email under 10 megabytes, and must include completed fill-ins across Sections B, E, F, and K, including unit pricing for CLINs 0011 through 0016, with CLIN 0016 requiring a dollar amount even if requesting a first article waiver. The government will award to the lowest-priced responsive and responsible bidder without negotiation, evaluating solely on offered unit prices for the line items. The contract imposes stringent technical, compliance, and administrative requirements. All items must comply with MIL-STD-2073-1 and MIL-STD-129 for packaging and marking, including Unique Item Identification (UID) per MIL-STD-130, with machine-readable verification required. Wood packaging must meet ISPM 15 and DOD 4140.65-M standards. Contractors must adhere to Controlled Unclassified Information (CUI) protocols, complete mandatory DoD CUI training, enforce CUI Non-Disclosure Agreements, and safeguard CUI in locked facilities. Cybersecurity obligations include compliance with DFARS 252.204-7019 and NIST SP 800-171 requirements, and all personnel with security clearances must undergo annual TARP training. Inspection and acceptance occur at origin
W6QK Acc- Dta

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
Federal
Equilibrator, CannonThis solicitation, numbered SPRDL1-26-R-0088, is a firm fixed price contract issued by the Defense Logistics Agency Land Warren for the procurement of 25 Equilibrators, Cannon (NSN 1025-01-312-1014, Part Number 12576115), with an option to purchase up to an additional 25 units. The procurement is a 100% small business set-aside under FAR 19.5, meaning only certified small business concerns are eligible to submit offers. The contract requires strict adherence to military packaging standards, including MIL-STD-2073-1 and Special Packaging Instruction AM12576115 Rev C, with Level B packaging, military preservation, and full compliance with MIL-STD-129 for marking, including barcoding, Military Shipment Labels, shelf-life indicators, and structural markings. All unit packages and palletized loads must meet dimensional and load stability requirements, and wood packaging must be heat-treated with an approved IPPC mark. Unique Item Identification (UII) is required and must be 2D barcoded in compliance with MIL-STD-130, verified through automatic identification technology. Delivery is FOB Destination to the Central Receiving Point in Anniston, AL, with acceptance occurring at the contractor’s origin facility. The contractor must provide a First Article Test Report and conform to quality standards including ISO 9001:2015 and MIL-STD-1916 for inspection and acceptance, with Verification Level IV for major characteristics and Level II for minor characteristics. The Technical Data Package (TDP) is export-controlled and accessible only to the designated Data Custodian under the U.S./Canada Joint Certification Program. Invoicing must occur via WAWF, and contractors are prohibited from seeking reimbursement for new facilities, tooling, or test equipment—all such costs must be included in the fixed price. CMMC Level 2 certification is required for handling controlled unclassified information, and the use of ozone-depleting substances is strictly regulated. The solicitation closes on July 23, 2026, and proposals must be submitted electronically through the designated portal with the cost proposal in Excel format. All offerors must maintain current, accurate representations in SAM.gov, including UEI, CAGE code, and small business status, and must comply with all FAR clauses listed, including
DLA Land Warren

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
Synopsis / Solicitation for CHUTE ASSY, FLEX FEED, M240, NSN: 1005-01-172-3038The U.S. Army Contracting Command - Detroit Arsenal is issuing a sole source, five-year firm-fixed price requirements contract to Standard Armament Inc. (SAI) Industries for the supply of CHUTE ASSY, FLEX FEED, M240, identified by NSN 1005-01-172-3038 and Government Part Number 12323398-1, with a maximum quantity of 625 units over the contract period. Deliveries are structured in annual increments of 125 units beginning 100 days after receipt of order, with shipments delivered at a rate of 25 units every thirty days to the final destination in Texarkana, TX. The contract is governed by a strict FOB Destination delivery term, and all items must be preserved and packaged in accordance with MIL-STD-2073-1 and the referenced Special Packaging Instruction SPI 12323398, Rev A, with military-level preservation and Level-B packaging. Unit packages must be marked per MIL-STD-129, including barcoding and MSL labels, and all wood packaging must meet heat treatment standards of 56°C for a minimum of 30 minutes. Inspection and acceptance of supplies occur at origin, while first article test reports are accepted at destination, with the contractor responsible for maintaining and making available all technical data, engineering exceptions, and subcontractor documentation for government review. The technical data package (TDP) essential for manufacturing is classified as export-controlled under Distribution D and subject to the United States/Canada Joint Certification Program; only companies certified under this program may access it. The TDP is provided through the System for Award Management and is restricted solely to SAI Industries. Contractors must comply with ISO 9001:2015 quality standards tailored to exclude paragraph 8.3, with flow-down obligations to all subcontracts involving critical or complex elements. All proposals must be submitted electronically by email to the specified contract specialist, adhering to strict formatting, file naming, and size limitations, and must remain valid for 120 days. Proposals are evaluated solely on price under a lowest evaluated offer model, with mandatory pass/fail gates requiring full compliance with technical requirements and contractor responsibility under FAR 9.104. Invoicing and receiving reports must be processed through Wide Area WorkFlow, and all contract terms incorporate federal acquisition regulation clauses including Prompt Payment, Assignment
W6QK Acc- Dta

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
Federal
RECEIVER, UPPER - M4/M4A1
W6QK Acc- Dta

POSTED

about 24 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332710
New
DIBBS
YOKE ASSYY, LOADERThe contract pertains to the procurement of seven yoke assemblies for a loader, identified by NSN 1730-01-455-9629 and part number 9383309-1, under solicitation SPE8EF-26-Q-0150. The item is classified as a critical application item and must adhere to Technical Data Package Rev B Gen 3 referenced against multiple drawings with specified revisions and dates. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size, and any amendments take precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unidentified attributes are treated as major. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements RP001, while the DLA Master List supersedes any conflicting standards. The delivery is firm fixed price with no variance allowed, and the item must be delivered within 60 days of the award date to the designated DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and all packaging and labeling must meet required military standards. The contract also identifies potential application of Covered Defense Information and mandates adherence to specific transportation protocols outlined in DLAD Proc Notes C19 and C20.
Machine Shops

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333922
New
DIBBS
ACTUATOR, ELECTRO-METhe contract pertains to the procurement of six electro-mechanical actuators, identified by NSN 3910-01-724-7721 and manufacturer part number DG-012203-04 from DRS Naval Power Systems Inc, under solicitation SPE8EF-26-T-0915. Delivery is required within 168 days of contract award, with shipment occurring FOB origin and inspection and acceptance taking place at the destination warehouse in Tracy, California. The unit of issue is each, with a fixed quantity of six units and no variance allowed. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The product is designated as a critical application item, and covered defense information may apply. The shipment must be delivered to the designated receiving warehouse by September 29, 2026, with the original required delivery date set for December 26, 2026. Transportation and shipping instructions follow DLAD procedural notes C19 and C20. The contract price is $6.00 per unit, totaling $36.00. All documentation, labeling, and packaging must reflect the specified unit of issue and quantity per unit pack as stated in the contract, and the point of contact for inquiries is Russell Keiser with the Department of Defense.
Conveyor and Conveying Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEMThis contract specifies the procurement of 10 units of commercial hardware identified by CAGE code 7Z049 and part number H-7854, supplied by ULINE INC based in Pleasant Prairie, Wisconsin. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity—exactly 10 units must be delivered. Delivery is required within 10 days of contract issuance, with FOB destination terms meaning the supplier bears all transportation risks and costs until the goods reach the final delivery point. Inspection and acceptance occur at the destination, which is Camp Carroll, Building 505, Waegwan, South Korea, under the military shipping address WT4KEA W0C3 USAMSC-K SP60. Packaging must fully comply with ASTM D3951 and MIL-STD-129 marking standards, with palletization adhering to DLA’s RP001 requirements, ensuring the Unit of Issue and Quantity per Unit Pack are strictly followed. The item is to be shipped per DLAD PROC NOTE C19 and C20, and must be labeled and delivered as directed to the government-designated recipient. The required delivery date is May 11, 2026, and the procurement is under solicitation SPE8EE-26-T-2178, with the contracting officer contact listed as Philip Ferrara. All deliveries must meet DLA’s Master List of Technical and Quality Requirements, which override any general industry standards.
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
SPINDLE, WHEELThe contract pertains to the procurement of 19 rear wheel spindles with NSN 1730-00-568-0653 under solicitation SPE8EF-26-Q-0146, issued by the Defense Logistics Agency. Delivery is required within 60 days of award, and the solicitation closure date is August 6, 2026. The technical and quality requirements governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, with applicability determined by the acquisition type and relevant document revision dates. This item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. Additional compliance requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and the handling of covered defense information. The contract is classified as a federal solicitation with no set-aside designation and is managed by the Department of Defense’s Construction & Equipment Manufacture and Construction organization.

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
DIBBS
FITTING, ATTACHMENT,The contract pertains to the fitting and attachment with NSN 1730-01-111-6877, requiring one unit to be delivered within 60 days of award. It incorporates technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item is subject to Covered Defense Information requirements and must comply with Cybersecurity Maturity Model Certification Level 2, requiring performance by a certified third-party assessment organization. Packaging must adhere to DLA-specific procurement standards, and non-accepted supplies must have government identification removed. Bare items require physical identification marking, and all technical data associated with this item is controlled under ITAR or EAR, restricting export, including disclosure to foreign nationals even within the United States, and mandating compliance with DFARS 252.225-7048. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. The solicitation number is SPE8EF-26-Q-0144, with a response deadline of August 5, 2026, and the point of contact is Russell Keiser at the Defense Logistics Agency.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
ROLLER, CONVEYORThe contract pertains to the procurement of one unit of a roller conveyor, identified by NSN 3910-01-653-9991 and part number 86312-14, under solicitation SPE8EF-26-Q-0139. The item is classified as a critical application item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including specific mandates for cybersecurity maturity under CMMC Level 2 self-assessment, FAA bare item marking, and supply chain traceability per DLAD Procurement Note C03. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129 for marking, and DLA Packaging Requirements, with no special marking required and palletization following RP001 standards. Inspection and acceptance occur at destination under a firm fixed price with zero variance tolerance, and delivery is due 60 days after award. The item must also meet FAA airworthiness approval requirements and incorporate covered defense information protocols. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies the government’s delivery and freight destination as Tracy, California, with the technical data package referencing drawing number 14153 RE-016539991 and CDRL FAACERTCOM-25015. The unit of issue is EA, pricing is fixed, and the contractor must retain full supply chain documentation as mandated.

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
ADJUSTMENT ASSEMBLY, TRThe contract pertains to the procurement of five Adjustment Assembly, Traverse units with NSN 1730-00-568-0621 under solicitation SPE8EF-26-Q-0116, with a delivery requirement of 90 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions in effect on the solicitation issue date controlling for simplified acquisitions and the RFP issue date for large acquisitions unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. Manufacturing may involve casting or forging, and contractors seeking tooling or material support must submit a request via the designated DLA portal or email. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location, and access is limited to contractors with JCP certification, completed DLA training, and formal approval. Identification marking must comply with MIL-STD-130N, and a Certificate of Conformance is required. Drawings are available only during the open solicitation period via the DIBBS portal, and covered defense information applies under the contract. The point of contact for inquiries is Russell Keiser, with the solicitation open until August 5, 2026.

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, BOMB SKID
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
TOWBAR, AIRCRAFT
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
BLOCK ASSEMBLY, PUMP AN

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COLLAR, BRACE, AIRCRA
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details