Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PAD, HOT-COLD TREATMENT

Active
SPE2DH-26-T-5900Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of reusable hot-cold gel pack therapy devices, sized at 6.6 inches by 9 inches, in cases of 24 units each, with a total order of 10 cases. These noncirculating gel packs are nontoxic and nonirritating, designed for convenient and effective pain relief, and are classified as a Class I medical device under FDA regulation. Although a 510(k) premarket notification is not required, the product must comply with FDA registration, listing, labeling, and good manufacturing practices. All items must be marked in strict accordance with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaged per DLA packaging requirements and MIL-STD-2073-1E, ensuring protection against damage during transport. The delivery is FOB destination, with a strict five-day delivery window and zero quantity variance allowed, and must be shipped via the fastest traceable means, excluding parcel post. The items are to be delivered to Fort Stewart, Georgia, with detailed packaging, palletization, and marking instructions to ensure compliance with government standards. The solicitation number is SPE2DH-26-T-5900, issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 17, 2026, and a required delivery date of August 12, 2026. The NSN is 6530-01-723-6237 and the manufacturer part number is 80104, produced by Cardinal Health, Inc. The contract includes references to technical and quality requirements from the DLA Master List, and incorporates provisions for the removal of government identification from non-accepted supplies. Covered defense information may apply, and buyers must refer the bid details to a product specialist via EBS for confirmation. The unit of issue is case, with a fixed price of $10.00 per case, totaling $100.00. Special shipping labels and markings are required, and all packaging must be commercial in nature, suitable for common carrier transit at the lowest possible rate.

General Info

10 cases of 6.6x9 inch gel packs, FDA Class I, FOB destination, $10/case, deliver to Fort Stewart by Aug 12, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PAD,HOT-COLD TREATMENT,NONCIRCULATING
PAD<(>,<)> HOT-COLD TREATMENT<(>,<)> NONCIRCULATING
PROVIDE HOT OR COLD THERAPY FOR CONVENIENT AND EFFECTIVE PAIN RELIEF;
GEL PACK NONTOXIC, NONIRRITATING, INSULATED; CASE OF 24; SIZE: 6.6 IN X
9 IN; REUSABLE; LARGE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
REGULATION 890.5700 CLASS I EVEN THOUGH A 510(K) IS NOT REQUIRED, IT IS NECESSARY TO MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE: REGISTRATION AND LISTING, LABELING OR GMP'S.
SHALL BE MARKED IAW THE LATEST EDITION OF THE MEDICAL MARKING STANDARD NO. 1 https://www.dla.mil/Logistics-Operations/Packaging/
CARDINAL HEALTH, INC. 00E55 P/N 80104
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017804184 0001 CS 10.000
SPE2DH-26-T-5900
SECTION B
PR: 7017804184 PRLI: 0001 CONT’D
NSN/MATERIAL:6530017236237
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE2DH-26-T-5900
SECTION B
PR: 7017804184 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
M/F: (TCN) W33RBS62180613
RDD: 233
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/12/2026
SPE2DH-26-T-5900 NSN/Part Number: 6530-01-723-6237 Quantity: 10 CS Purchase Request: 7017804184QTY: 10 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
Supply of Surgical Adhesive Tape (NSN: 6510-01-414-3579)
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Medical Device Manufacturing – Disposable Inspiratory Valves
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Disposable Hypodermic Syringe Supply
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
LITTER-SPLINT, EXTRICAT
Solicitation # SPE2DS-26-T-328C
The Litter-Splint, Extrication is a specialized medical device designed for rapid patient immobilization in cases of spinal and neck injuries, suitable for use with two- or four-person carries, helicopter lifts, or vertical confined space extractions. Constructed of 18 oz vinyl-laminated polyester in orange, it resists acids and stains, is easily decontaminated, and folds to 24 x 12 inches for compact storage, expanding to 73 x 24 inches for use. It features continuous polyester straps ensuring patient safety during transport and has a capacity rating of up to 1500 lbs. Each unit must be packaged in a sealed container that protects against damage and shipped in commercial exterior containers compliant with lowest-cost carrier requirements, ensuring safe delivery to the specified point. All packaging and marking must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies obtainable via DLA Troop Support. The product is identified by NSN 6530-01-477-8525, with a unit of issue of each, and is subject to technical and quality requirements listed in the DLA Master List. The procurement is governed by solicitation SPE2DS-26-T-328C, issued by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 17, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEATING, CHEMICAL
Solicitation # SPE2DH-26-T-5894
The contract solicitation SPE2DH-26-T-5894 seeks the procurement of 1 package of 24 disposable chemical heating pads measuring 11 x 4 inches, identified by NSN 6530-01-212-5343. Each pad is designed to deliver one hour of uniform heat at a maximum temperature of 110 degrees Fahrenheit, conforms to body contours, and is constructed with plastic laminated fabric for the outer case. The unit of issue is a package of twenty-four, and delivery is required within twenty days after receipt of order, with the original delivery date set for August 11, 2026, to Luke Air Force Base, Arizona. The product must comply with all applicable technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements through identified R or I numbers, and packaging must adhere to MIL-STD-2073-1E as augmented by Special Packaging Instructions MPpWN00001. Commercial packaging is required, with each unit sealed in a protective container and shipped in suitable exterior containers appropriate for carrier transport. Marking must follow the Medical Marking Standard No. 1, superseding MIL-STD-129, with additional labeling requirements for hazardous materials according to the Hazard Communication Standard (29 CFR 1910.1200 et seq.) or other specified statutes where applicable. Inspection and acceptance are to occur at destination under FAR 52.246-2, and invoicing must be submitted electronically via WAWF as authorized by DFARS 252.232-7003. The contract is fixed price, and all offers must be submitted through the DIBBS portal by 5:00 PM Eastern Time on August 17, 2026. Offerors are required to complete mandatory representations and certifications in SAM including compliance with safeguarding defense information, prohibition on covered telecommunications equipment, and small business program status. Alternate product submissions are permitted only if accompanied by complete technical data, as the government lacks sufficient information for evaluation without it. The contracting officer is Tina Vu of DLA Troop Support, Medical Supply Chain FSH, with payment and administrative details to be finalized upon award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TUBE, FEEDING, SURGICAL
Solicitation # SPE2DS-26-T-327R
The contract is for the procurement of pediatric nasal feeding tubes, specifically 8 FR size, with a radiopaque distal end to enable precise placement confirmation, each unit measuring 42 inches in length and supplied in quantities of 10 per pack. The item is identified by NSN 6515-01-150-2946 and manufacturer part number 8888-261800, supplied by COVIDEN SALES LLC with commercial part number 461800. The requirement is for two package units, each containing 10 tubes, with a fixed unit price of $2.00 and a total contract value based on the specified quantity. Delivery must be completed within five days of award, with FOB destination terms applying, and the supplies must be delivered to M97111 at Camp Pendleton, CA, under strict shipping requirements prohibiting parcel post and mandating traceable transportation methods. All packaging must comply with commercial standards as outlined in the DLA Packaging Requirements for Procurement (RP001), be sealed to prevent damage, and be palletized per RP001, with unit and shipping containers marked in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Materials must be labeled per DLA’s latest Medical Marking Standard, and all technical and quality specifications referenced by ‘R’ or ‘I’ numbers from the DLA Master List of Technical and Quality Requirements are binding and take precedence over ASTM D3951. The device is regulated by the FDA, requiring referral confirmation via EBS prior to award. The solicitation is a small business set-aside, with bids submitted exclusively through the DLA Internet Bid Board System, and includes multiple DFARS clauses governing cybersecurity, information safeguarding, export controls, hazardous materials, whistleblower protections, and compliance with NIST SP 800-171 for protected defense information. Payment must be processed electronically through the Wide Area WorkFlow system, and all deliveries are subject to destination inspection and acceptance. The contracting officer, Michael Small, oversees the solicitation with an original required delivery date of August 11, 2026, and full compliance with all listed clauses is mandatory for award consideration.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INTRAOSSEOUS INFUSION
Solicitation # SPE2DS-26-T-328E
The contract pertains to the procurement of two boxes of EZ-IO 25mm Intraosseous Infusion System kits, each box containing five units, for a total of ten kits. Each kit includes a 15-gauge sterile EZ-IO needle set, an EZ-Stabilizer dressing, an EZ-Connect extension set, a NeedleVise 1-port sharps block, and a patient wristband, designed to streamline and simplify intraosseous vascular access in clinical settings. The system features a flexible, translucent dressing that provides full visibility of the insertion site, enhances securement with improved adhesion, and reduces the risk of catheter dislodgement while minimizing the number of separate items clinicians must carry. All components are sterile and intended for use with every EZ-IO insertion. The product must have a minimum shelf life of 48 months, with no more than seven months elapsed between the date of manufacture and delivery to the government. The NSN is 6515-01-647-1590, and the purchase request number is 7017804039. Delivery is required within 20 days of award under solicitation SPE2DS-26-T-328E, issued by the Department of Defense's Medical Supply ChainMD Surg FSF. Technical and quality requirements are governed by the DLA Master List, packaging must comply with DLA standards, and suppliers must remove government identification from non-accepted items. Bidders must clearly identify the source and part number being supplied. The primary point of contact is Colin Owens, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-327T
The contract pertains to the procurement of surgical gauze sponges measuring 6 by 6-3/4 inches, packaged in units of 600 per package, with a total quantity of one unit required. The item is identified by NSN 6510-00-294-0009 and is to be delivered within 20 days of award. Packaging must comply with DLA packaging requirements, and the product must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and controlled by the revision in effect on the solicitation or award date. The sponges are to be furnished in fluff Kerlix format, with 10 envelopes per tray and 12 trays per box. The solicitation is issued under SPE2DS-26-T-327T, with a response deadline of August 17, 2026, and falls under NAICS code 339113 for surgical appliance and supply manufacturing. The contracting agency is the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with performance destined to Fort Campbell, Tennessee. Point of contact is Mary-Kathryn Donahue, and all supplies must be marked in accordance with government identification removal requirements for non-accepted items.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTROL SET, GASTROINTE
Solicitation # SPE2DS-26-T-327J
The contract calls for the procurement of a Gastrointestinal Control Set, a non-infectious quality control kit designed for in vitro use with the FilmArray Gastrointestinal Panel Assay on the FilmArray instrument. Each kit contains 12 vials, each with 200 µL of synthetic nucleic acid suspended in a buffered solution of preservatives and stabilizers, sufficient for six quality control runs, composed of six each of part numbers M2393718 and M2402818. The product must be stored frozen between -25°C and -15°C and has a fixed shelf life of 18 months, non-extendable, per Type I (Code K) requirements. The item is regulated by the FDA, and the contracting official must submit a referral to confirm regulatory compliance. The required quantity is three kits, to be delivered within 83 days after receipt of order via FOB Destination to APO AE 09227-0000, with zero variance allowed in quantity. Packaging must comply with commercial standards as specified, using sealed unit containers that prevent breakage, and must be shipped in exterior containers ensuring safe delivery at the lowest carrier rate. All labeling and marking must adhere to the Medical Marking Standard No. 1, superseding MIL-STD-129, with palletization following DLA Packaging Requirements. The kit is classified as a covered defense information item, requiring compliance with safeguarding and cyber incident reporting standards under DFARS 252.204-7012, and incorporates additional DFARS clauses addressing hazardous materials, export controls, whistleblower protections, and prohibitions on certain Chinese military company products. The contractor must specify the source and part number supplied, submit bids via DIBBS, and comply with electronic payment and invoicing requirements through WAWF. The contract is an automated award and not a small business set-aside, with payment routed according to the resulting award documentation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPECIMEN KIT, URINE
Solicitation # SPE2DH-26-T-5897
The specimen kit for urine is designed specifically for collection and transfer of samples intended for detection of Chlamydia trachomatis and Neisseria gonorrhoeae using COBAS PCR technology. Each kit includes a COBAS PCR media tube and a transfer pipette, packaged in box quantities of 100 units per box. The item is classified as a TYPE I (CODE M) medical supply with a strict 24-month shelf life that is non-extendable, requiring that no more than three months have elapsed between the date of manufacture and the date of delivery to the government. Labeling must conform to the latest revision of Medical Marking Standard No. 1, clearly indicating the date of manufacture, expiration or retest date, and the contract or lot number, superseding all previous MIL-STD-129 requirements. Packaging must comply with commercial standards, ensuring protection from damage during transit through sealed unit containers and suitable exterior shipping containers, with markings aligned to MMS No. 1. The solicitation is governed by DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. The National Stock Number is 6632-01-675-7582 with a procurement quantity of two boxes, under purchase request 7017802509, and a delivery requirement of 20 days after order. The contract is issued under solicitation SPE2DH-26-T-5897, posted on August 10, 2026, with responses due by August 17, 2026. The item falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH. The point of contact is Tina Vu, with delivery performance required at Minot Air Force Base, North Dakota. This acquisition is subject to applicable defense information controls and follows DLA’s standard procedures for medical equipment procurement, including compliance with all referenced technical specifications and labeling mandates.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
VALVE, INSPIRATORY, M
Solicitation # SPE2DS-26-T-327C
The contract solicits 4 cases of disposable inspiratory valves with adapters, each case containing 20 units, designed for use with manual resuscitators or ventilators as specified by the manufacturer. These PEEP valves are compatible directly with original AMBU resuscitators and AMBUMATIC devices without additional connectors, feature unique resistance characteristics, are latex-free, and intended for single-use application. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier, with palletization compliant with DLA Packaging Requirements for Procurement. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, with each label including the NSN, manufacturer and CAGE code, date of manufacture, and contract number. The product has a case dimension of 9.25 x 8.0 x 5.0 inches and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements. Delivery is required within five days of award to Fort Stewart, Georgia, under FOB Destination terms. The solicitation mandates electronic invoicing through WAWF and requires compliance with DFARS clauses including Safeguarding Covered Defense Information and Cyber Incident Reporting, NIST SP 800-171 DOD Assessment Requirements with a deviation, and prohibitions on hexavalent chromium and export-controlled items. Offerors must provide complete data for the approved part number and are not permitted to submit alternate offers without full technical data. Hazardous material documentation, including Safety Data Sheets compliant with 29 CFR 1910.1200, must be submitted if applicable, and all labeling must meet Hazard Communication Standard requirements. Quotes must be submitted via DIBBS by the closing date of August 17, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DEPRESSOR, TONGUE
Solicitation # SPE2DS-26-T-327Q
The contract calls for the procurement of 5 packages of sterile hardwood tongue depressors, each containing 100 units, identified by NSN 6515013055120, with delivery required within 20 days of order receipt to two U.S. Navy vessels: USS Theodore Roosevelt CVN 71 and USS Nitze DDG 94, delivered FOB destination. The item is regulated by the FDA and must comply with stringent medical standards, including being marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaged commercially with each unit sealed in a protective container to prevent damage during transit. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and all packaging must meet ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The item has a non-extendable shelf life of 60 months and must be shipped by the fastest traceable means, prohibiting parcel post; vendors must use the Vendor Shipment Module (VSM) via the Account Management & Provisioning System (AMPS), which is now required for all DLA shipments. The contract mandates electronic invoicing through Wide Area Workflow (WAWF), with payment tied to receipt and inspection at the destination. Compliance with cybersecurity protocols is required through DFARS clauses covering safeguarding covered defense information, NIST SP 800-171 assessments, and prohibitions against using covered telecommunications equipment. Offerors must submit a Safety Data Sheet to be considered responsible for award, and all representations—regarding small business status, trafficking in persons, employment eligibility, and cyber compliance—must be validated in the System for Award Management. The Berry Amendment applies due to the threshold reduction to $150,000, requiring domestic content disclosure if applicable, and the solicitation is subject to automated award consideration with a HUBZone preference unless waived. The contract is issued under the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and must be submitted via DIBBS by the stated deadline.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334516
New
DIBBS
Supply of Long Wave UV Examination Lamp
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488310
New
DIBBS
Domestic and International Logistics / Sea TransportThe contract requires the sea transportation of supplies under DFARS 252.247-7023, ensuring full compliance with military shipping standards including vessel suitability, secure routing, and coordination for delivery to Luke AFB or other Department of Defense locations. All logistics operations must integrate seamlessly with the Wide Area Workflow and Defense Logistics Agency systems to maintain supply chain visibility, documentation accuracy, and timely reporting. Vessels must meet all regulatory and operational requirements for Department of Defense cargo, including security, tracking, and contingency protocols. The solicitation is classified as a subcontract under NAICS code 488310 for domestic and international logistics and sea transport, with a response deadline of August 17, 2026. The place of performance is centered at Luke AFB with a ZIP code of 85309-5300, though deliveries may extend to other designated DoD sites. The contracting entity is the Medical Supply Chain FSH under the Department of Defense, and the process is managed through the DIBBS platform, requiring vendors to adhere to federal acquisition guidelines and system-specific workflows for payment, delivery confirmation, and compliance verification.
Port and Harbor Operations

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThis contract requires the identification, documentation, and ongoing maintenance of Safety Data Sheets for hazardous components used in chemical heating pads, with strict adherence to OSHA’s Hazard Communication Standard 29 CFR 1910.1200(g) and Department of Defense reporting requirements. The work focuses on ensuring all chemical ingredients are properly cataloged, their risks accurately documented, and SDS records updated in real time to reflect any formulation changes or regulatory updates, thereby maintaining compliance across the supply chain. The subcontractor must establish a robust system for tracking SDS versions, confirming regulatory alignment, and facilitating timely access for authorized personnel under DoD protocols. The performance location is Luke Air Force Base with a zip code of 85309-5300, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. The opportunity is posted as a subcontract with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH. The contractor must be prepared to coordinate with military and federal stakeholders, demonstrate experience in hazardous material compliance, and ensure full traceability and audit readiness of all SDS documentation to meet defense logistics and safety standards.
Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Medical-Grade Packaging and LabelingThe contractor is required to package and label disposable heating pads in full compliance with MMS No. 1 and MIL-STD-2073-1E standards, ensuring all procedures meet stringent Department of Defense medical supply chain requirements. This includes the application of accurate barcoding for inventory tracking and hazard labeling to identify potential risks, ensuring safe handling and distribution throughout military medical logistics networks. The packaging must be engineered for durability, sterility, and compatibility with DoD supply systems, with all labeling elements clearly visible and compliant with federal and military regulations. Performance of this subcontract is designated for Luke Air Force Base, Arizona, with a delivery address of 85309-5300. The opportunity is open for bid under the NAICS code 561910 and was posted on August 10, 2026, with responses due by August 17, 2026. While no set-aside designation is specified, the work is exclusively for the Department of Defense’s Medical Supply Chain FSH, emphasizing strict adherence to military-grade protocols and end-to-end traceability from packaging through final distribution. All materials and processes must support uninterrupted integration into the DoD’s established medical logistics framework.
Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Disposable Chemical Heating Pad ManufacturingThe contract calls for the manufacture of disposable, single-use chemical heating pads with a plastic-laminated fabric casing engineered to conform to body contours and deliver consistent, uniform heat for exactly one hour at a temperature of 110°F, fully compliant with military medical specifications. These heating pads are intended for use in field medical scenarios requiring rapid, reliable thermal therapy, with strict adherence to performance, safety, and durability standards set by the Department of Defense. The solicitation is issued as a subcontract under NAICS code 326299, with a response deadline of August 17, 2026, and the place of performance is designated as Luke Air Force Base, Arizona, with a zip code of 85309-5300. The contract falls under the purview of the Medical Supply Chain FSH within the Department of Defense, though no set-aside provisions or specific point of contact are provided. All submissions must meet the technical and operational requirements outlined in the military medical specs, and the procurement is accessible through the DIBBS platform via the provided url.
All Other Rubber Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE2DH-26-T-5896
The contract specifies the procurement of 10 units of a lithium-ion rechargeable battery assembly designed for use with the portable volume ventilator identified by NSN 6515-01-586-5898. Each battery has a capacity of 6.6AH at 14.8V, configured in a 4S3P arrangement with 12 cells, and physical dimensions of 7.00 inches wide, 1.00 inch high, and 3.50 inches deep, weighing 0.90 pounds. The battery must meet a 60-month shelf life requirement, with no more than nine months elapsed between the date of manufacture and the date of delivery to the government. Optimal long-term storage conditions are defined as temperatures between -15°C and 21°C (5°F to 71°F). The item is identified by part number 6130-01-665-7224 and is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Packaging must comply with DLA standards, and removed government identification from non-accepted supplies must be properly handled. Covered defense information potentially applies, and delivery is required within five days of award to Suffolk, Virginia, ZIP 23435-5000. The solicitation number is SPE2DH-26-T-5896, posted on August 10, 2026, with responses due by August 17, 2026, under the NAICS code 335999, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
PAPER SHEETING, LABORAT
Solicitation # SPE2DH-26-T-5898
The contract is for the procurement of 50 sheets of laboratory paper sheeting, 22 inches long and 18 inches wide, with a polyethylene backing, commercially known as “BENCHKOTE” and manufactured by WHATMAN under part number 2300-916, with equivalent part numbers listed from A. DAIGGER AND CO. and other suppliers. The unit of issue is one package (PG) containing 50 individual sheets, with a total quantity of one package ordered under purchase request 7017802047 and NSN 6640-01-268-5486. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, inspection and acceptance occurring at the delivery point. Packaging must comply with DLA Packaging Requirements for Procurement, including sealed unit containers that protect against damage, and exterior shipping containers suitable for safe transport at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must also meet MIL-STD-2073-1E standards. The product is FDA-regulated, requiring a referral in EBS to confirm regulatory compliance. The solicitation number is SPE2DH-26-T-5898, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline in August 2026 and performance location at Whiteman Air Force Base.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
CYLINDER, GRADUATED, LAB
Solicitation # SPE2DH-26-T-5899
The contract specifies the procurement of five graduated laboratory cylinders made of polymethyl pentene, each with a 250 mL capacity, designed for pouring out and marked with subdivisions every 2 milliliters, with major graduations every 20th mark. The items must be supplied as complete units in sealed, commercially suitable containers that protect against damage or breakage, packed within exterior shipping containers that ensure safe and cost-effective delivery to the designated point in Jacksonville, Florida, with a delivery deadline of five days after award. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and bidders must provide the source and part number for the specific product being offered. The acquisition falls under a simplified procurement process governed by the DLA Master List of Technical and Quality Requirements, and all material must adhere to the technical specifications outlined in the referenced requirements. The solicitation, issued under contract number SPE2DH-26-T-5899 with NSN 6640-01-020-8801, was posted on August 10, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through point of contact Tina Vu.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
LAMP, LONG WAVE UV, EXAM
Solicitation # SPE2DH-26-T-5895
The contract solicits one unit of a Long Wave UV Examination Lamp with specific technical parameters: dimensions of 9x4x3 inches, 4 watts of power, operating at 50/60 Hz and compatible with both 120 and 230 volts, manufactured by SPECTRO-UV, LLC under part number EN-140. The item is identified by NSN 6530-01-292-7700 and is to be delivered to Whiteman Air Force Base, Missouri under FOB Destination terms within five days of order receipt. Packaging and marking must strictly adhere to commercial standards as defined in the procurement documentation, using sealed unit containers to prevent damage, and exterior shipping containers suitable for safe transport by common carrier at lowest cost. All materials must be marked per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and any hazardous components must be labeled in compliance with 29 CFR 1910.1200. The lamp is subject to quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the acquisition is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. All offers must be submitted via the DIBBS portal by August 17, 2026, with no evaluation of proposals involving additive manufacturing or those lacking a required Safety Data Sheet. Offers must also disclose use of non-domestic materials and confirm compliance with prohibitions on covered telecommunications equipment. Payment must be processed electronically through Wide Area WorkFlow, and receiving reports and invoices must be submitted per DFARS Appendix F guidelines. Contractual clauses incorporate mandatory federal regulations including cybersecurity safeguards per NIST SP 800-171, prohibition of hexavalent chromium, whistleblower protections, and restrictions on arbitration agreements. The government may utilize HUBZone price evaluation preferences for award, and while the solicitation is not a small business set-aside, contractors must validate their size status in SAM and submit current representations. Inspection and acceptance occur at the destination point under FAR 52.246-2, and the contractor must comply with all relevant packaging, labeling, and safety standards, including DFARS 252.223-7001 for hazard warnings. Deviations in contracting clauses related to system for award management, subcontracting, contract type, and other provisions are in effect as of February 2
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
DLA Packaging and Marking Compliance SupportThe contract seeks advisory or fulfillment services to ensure full compliance with DLA packaging standards for medical supply shipments, specifically focusing on RP001 packaging requirements, unit container sealing, and labeling in accordance with Medical Marking Standard No. 1. These services are critical to maintaining regulatory adherence and operational readiness for medical logistics within the Department of Defense supply chain. The work involves precise execution of packaging protocols and marking procedures to guarantee accurate identification, traceability, and handling of medical materiel throughout distribution channels. This is a subcontract opportunity under NAICS code 541620, with a response deadline of August 17, 2026, and a posted date of August 9, 2026. Performance is required at the designated location in Jacksonville with ZIP code 28545-6070. The contracting entity is the Medical Supply Chain FSH under the Department of Defense, and while no specific set-aside status is indicated, interested parties must adhere to all technical and compliance specifications outlined in the referenced standards to qualify for award.
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details