This Subcontract opportunity from Nevada was posted on April 10, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Paint and Corrosion Protection Application

Closed

State & Local

Submission Closed05/01/2024, 05:00:00 PM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332813

New

DIBBS

CAD Plating Services for Steel HardwareThis subcontract involves providing specialized CAD plating services for steel hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes surface preparation, cleaning, and the application of clear anodic or chemical plating to steel stepped studs to ensure necessary corrosion resistance. The contractor must utilize appropriate chemical plating baths and curing equipment while strictly adhering to prohibitions regarding hexavalent chromium and maintaining compliance with RQ006 quality conformance standards. The project requires the delivery of four CAD-plated stepped steel studs under NAICS code 332813. This requirement is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThis subcontract involves providing specialized phosphate coating and surface treatment services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the surface preparation and application of phosphate coatings for 54 mounting plates, ensuring all work adheres to the DLA Master List of Technical and Quality Requirements. To qualify, the contractor must possess specific phosphate coating certifications and maintain the necessary treatment tanks. Additionally, strict compliance with prohibitions regarding ozone-depleting chemicals is required. The performance of this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Plating and Surface TreatmentThis subcontract for Precision Plating and Surface Treatment supports the DLA Weapons Support Land Supply Chain through the delivery of surface-treated Feed Trays. The selected provider will perform plating and surface treatments in accordance with ASTM-B633 and TDP specifications, with a strict requirement that no Class I Ozone Depleting Chemicals are used during the process. Performance of the work will take place in New Cumberland. To be eligible, contractors must maintain ITAR and EAR registrations and achieve CMMC Level 2 certification to ensure the secure handling of technical data. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports the DLA Weapons Support Maritime Supply Chain by providing specialized surface treatments and coatings for prime contractors. The selected provider must apply finishes in strict accordance with TDP Rev A Gen 2 and associated reference drawings, ensuring that all coatings maintain critical tolerances and preserve the integrity of IUID markings. The contractor is required to hold ISO 9001:2015 certification and must manage all hazardous materials according to 29 CFR 1910.1200(g) regulations. Performance will take place in Tracy, California, with the primary objective being the delivery of finished components that meet all specified Department of Defense standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating Services for Critical Gun PartsThis subcontract involves providing specialized phosphate coating services for critical gun parts on behalf of prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The contractor is responsible for applying coatings to pins in strict accordance with MIL-DTL-16232 using approved written procedures to ensure all thickness and adherence specifications are met. The performance of this contract requires facility approval by the PCO to allow for DCMA in-process inspections and the submission of recent Government First Article or PVT test reports. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hot-Dip Zinc Coating ServicesThis subcontract for the Department of Defense involves providing hot-dip zinc coating services for prime contractors at the DDSP New Cumberland Facility. The scope of work requires the application of industrial galvanizing to 892 feet of extruded structural steel angles to ensure long-term corrosion prevention. All coating processes and final finishes must strictly adhere to ASTM A123 standards. The successful contractor is responsible for delivering the treated structural steel angles along with a formal certification of compliance.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Industrial Coating and Finishing ServicesThis subcontract for Industrial Coating and Finishing Services involves providing surface treatment and protective coatings for metal assemblies to support prime contractors on DLA supply contracts. The scope of work focuses on the delivery of finished metal components while maintaining strict adherence to regulatory standards, specifically the prohibition of Hexavalent Chromium per DFARS 252.223-7008 and the hazardous material identification requirements of FAR 52.223-3. Managed under the Department of Defense through the Red River Receiving Building, the project falls under NAICS code 332813. The performance of these services is centered in the 75507-5000 zip code area. Interested parties should note the response deadline of November 17, 2026.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Aerospace Special Process ServicesThis subcontract for Aerospace Special Process Services involves performing NADCAP-certified special processes for prime contractors supporting DLA Weapons Support ASC aircraft component projects. The scope of work includes executing plating, anodizing, or heat treating as specified in drawing EI-014768257, with all deliverables requiring certifications of conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Tinker AFB. Strict adherence to aerospace quality standards and ITAR/EAR export controls is mandatory. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Phosphate Coating ServicesThis subcontract for Specialized Phosphate Coating Services supports the DLA Weapons Support Land Supply Chain by providing phosphate coating for prime contractors. The scope of work involves applying coatings to metal components in strict accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V to ensure all deliverables meet rigorous military specifications. To qualify for this engagement, providers must hold NADCAP certification for phosphate chemical processes as issued by the Performance Review Institute. The work is associated with NAICS code 332813 and is designated for performance in Tracy, California. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating SpecialistThis subcontract for the DLA Weapons Support Maritime Supply Chain involves providing specialized cadmium plating services for 19,150 steel hose clamp units. The work will be performed at Tinker AFB and requires the use of industrial plating tanks and chemical processing equipment to ensure all units meet the specific plating thickness and quality standards outlined in the technical drawings. The selected contractor must strictly adhere to all environmental regulations concerning ozone-depleting chemicals during the manufacturing process. This project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 10 days

AI Contract Overview

The Nevada Department of Transportation is seeking a subcontractor for a Paint and Corrosion Protection Application project. The scope of work involves industrial paint application on heavy-duty equipment, specifically requiring a minimum 5 mil dry film thickness to ensure adequate corrosion resistance. This opportunity was posted on April 10, 2024, and requires responses to be submitted by May 2, 2024. The project is categorized under NAICS code 332813.