Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PALLET, FOREWARD SEC

Active
SPE4A7-26-Q-0873Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single forward section pallet with NSN 1560-01-072-3457 under solicitation SPE4A7-26-Q-0873, with a delivery requirement of 262 days ADO. Technical data associated with this item is controlled under U.S. export regulations, either ITAR or EAR, and any disclosure—whether to foreign nationals within the United States or abroad—requires explicit authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this technical data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have been formally approved by the Defense Logistics Agency. Additionally, the contractor must have achieved CMMC Level 2 certification as a third-party assessment organization and adhere to physical identification and bare item marking requirements for the pallet. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Brian Kurtz designated as the primary point of contact.

General Info

Procurement of one forward section pallet with export-controlled technical data, CMMC Level 2, and DOD certification required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

321920 - Wood Container and Pallet ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-Q-0873.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brian Kurtz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PALLET,FOREWARD SECTION RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-072-3457 Quantity: 1 EA Purchase Request: 7016417279QTY: 1 Delivery: 262 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 321920
New
DIBBS
SHIPPING AND STORAGThis contract specifies the procurement of six shipping and storage containers identified by NSN 8145-01-077-0700, with a fixed quantity requiring exact compliance—no variance is permitted. Delivery is due within 130 days after order date, with freight shipped FOB origin and inspection and acceptance occurring at the destination. The containers must be packaged and labeled strictly in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Packaging must be palletized per RP001: DLA Packaging Requirements for Procurement, and all items must be marked per MIL-STD-130N without impression stamping, while excluding government identification from non-accepted supplies. The shipment is directed to DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The item is subject to Covered Defense Information requirements, and the contract references the DLA eProcurement portal for applicable technical specifications. The solicitation number is SPE8E9-26-Q-0626, with a response deadline of August 3, 2026, and the material need date is December 31, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 321920
New
Federal
Fuelwood ProcessingThe contract awards the processing of 2,200 cords of fire-killed timber into fuelwood under a total small business set-aside, meaning only small businesses are eligible to bid. The work must meet specific size and staging requirements, ensuring the fuelwood is prepared to standardized specifications for use. The North American Industry Classification System code is 321920, indicating the scope involves wood product manufacturing. Performance is required in Penasco, New Mexico, with the exact address not specified. The solicitation was posted on July 24, 2026, and all proposals must be submitted by August 24, 2026, at 10:00 PM Eastern Time. The contracting entity is the Stewardship Contracting Branch of the USDA Forest Service under the Department of Agriculture, and the opportunity is structured as a subcontract.
Stewardship Contracting Branch Usda-Fs

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 321920
New
Federal
Wood Packaging Material (WPM) ComplianceThe contract requires the supply or fabrication of wooden crates and pallets that are heat-treated and fully compliant with ISPM 15 international standards for phytosanitary measures, ensuring safe transport of goods across borders. All packaging must be properly marked in accordance with GSAM 552.211.89 to verify treatment and origin, supporting both domestic distribution and potential international shipping needs. The materials must meet rigorous quality and documentation requirements to prevent the spread of invasive pests and maintain regulatory compliance. This subcontract under the NAICS code 321920 is issued by the General Services Administration’s Supply Chain Management Contracting Division and is open for response until July 28, 2026. The work is not restricted to a specific location and may involve performance across multiple sites to support government logistics operations worldwide. Interested parties must ensure their production processes align with the specified technical and marking standards, and submit proposals prior to the deadline to be considered for award.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

4 days ago

DEADLINE

in about 4 hours
View Details
NAICS: 321920
New
SLED
Supply of Plywood and Engineered Wood PanelsThe contract titled Supply of Plywood and Engineered Wood Panels seeks the procurement of treated and untreated plywood, OSB, fiberboard, and fiber cement panels in standard 4'x8' dimensions or as linear measurements, as explicitly required by the specifications. The solicitation is issued by the State of NC – Wildlife Resources Commission under NAICS code 321920, classifying it as a subcontract opportunity with no set-aside designation. Interested parties must submit responses by the deadline of August 7, 2026, at 7:00 PM Eastern Time, following the posting date of July 23, 2026. The place of performance and delivery location are not specified in the provided data, and no point of contact is listed, though details and submission guidelines can be accessed through the official state procurement portal linked in the contract data.
State of NC - Wildlife Resources Commission

POSTED

6 days ago

DEADLINE

in 10 days
View Details
NAICS: 321920
New
DIBBS
Wooden Pallet Manufacturing (Heat-Treated, NSN: 3990002221044)The contract requires the manufacture of heat-treated, bark-free wooden pallets meeting stringent international and military standards, including ISPM-15 for phytosanitary compliance, MIL-STD-129 for military labeling, and DLA specifications for uniformity and durability. Each pallet must undergo precise heat treatment to eliminate pests, be completely free of bark, and maintain strict moisture control to ensure structural integrity and longevity under demanding conditions. The pallets are identified by NSN 3990002221044 and must include proper hazardous materials labeling as required by governing regulations. Performance is designated for Fort Hood, Texas, with delivery and compliance expected to align with the Department of Defense’s logistics framework. This subcontract opportunity has a submission deadline of August 3, 2026, and falls under NAICS code 321920 for other wood product manufacturing. While the solicitation number is not provided, the contract can be accessed via the DIBBS portal. Participation requires adherence to all technical, labeling, and treatment protocols outlined by federal military standards, with no indication of set-aside status for small or disadvantaged businesses. The contracting activity is attributed to the Construction & Equipment Manufacture and Construction division under the Department of Defense, emphasizing the need for precision, traceability, and readiness to support defense supply chain operations.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 321920
New
Federal
Military-Grade Packaging and Crating for Marine ComponentsThe contract requires the packaging of ten sliding doors using double-layer 3/4-inch bubble wrap and heavy-duty wooden crates that meet ASTM-D6251 Type III or ASTM-D6880 Class 2 standards, following MIL-STD-2073-1E Method 10 for military-grade packaging. All materials and methods must ensure maximum protection during transit, with strict adherence to federal defense packaging protocols to safeguard sensitive marine components. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 321920 indicating manufacturing of other wood products. The anticipated performance location is Curtis Bay, Maryland, with a ZIP code of 21226, and the solicitation is managed by the Department of Homeland Security’s Sflc Procurement Branch 3. Proposals are due by August 3, 2026, at 4:00 AM, with the opportunity posted on July 22, 2026.
Sflc Procurement Branch 3(00040)

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 321920
DIBBS
Seat, Pallet Assembly ManufacturingThe contract entails the manufacture and delivery of a seat pallet assembly identified by NSN 1680016486130, encompassing all phases from fabrication and assembly to rigorous quality control and final packaging for shipment to DLA Aviation. The work falls under NAICS code 321920, indicating it involves other wood product manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. The contract requires full compliance with defense specifications, ensuring that each component meets stringent performance and safety standards prior to delivery. All items must be properly documented, labeled, and prepared for immediate integration into military logistics systems upon arrival. The project is scheduled to be performed under a subcontract arrangement, with the award posted on July 21, 2026, and the place of performance unspecified, implying flexibility in manufacturing location as long as delivery deadlines and quality requirements are met. The contract is not subject to a specific small business set-aside, suggesting eligibility is open to a broad range of contractors. Delivery must align with DLA Aviation’s operational timelines, and the successful vendor must demonstrate proven experience in defense-grade assembly, adherence to federal quality protocols, and the capacity to handle classified or sensitive military logistics. The procurement is tracked under contract number SPE4A726P5935, ensuring traceability and accountability throughout the production and delivery lifecycle.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 321920
Federal
Wooden Crating and ISPM 15-Compliant Pallet FabricationThe contract requires the fabrication of wooden crates and pallets using debarked, heat-treated wood that meets ISPM 15 international phytosanitary standards, ensuring compliance for overseas military shipments. All materials must be certified by the American Lumber Standard Committee and properly marked with the required ALSC certification to affirm adherence to global shipping regulations. The work is classified as a subcontract under NAICS code 321920, which pertains to other wood product manufacturing, and is issued by the Department of Defense through the Georgia DLA Aviation office at Warner Robins. The solicitation was posted on July 21, 2026, with a response deadline of August 20, 2026, at 9:00 PM, and the place of performance is tied to U.S. military logistics operations, though specific location details are not provided. The contract emphasizes quality control, regulatory compliance, and readiness for defense supply chain requirements.
Ga DLA Aviation At Warner Robins

POSTED

7 days ago

DEADLINE

in 23 days
View Details
NAICS: 321920
DIBBS
Wood Packaging Material (WPM) Supply and ComplianceThe contract secures the supply of wood packaging material compliant with ISPM 15 standards, including pallets and dunnage, each marked with visible HT or KD HT treatments on diagonally opposite sides to ensure international regulatory adherence. All materials must meet strict phytosanitary requirements to prevent the spread of pests during global shipments, with the supplier responsible for accurate labeling and documentation to verify treatment compliance. The work is governed under NAICS code 321920 for other wood product manufacturing and is administered by the Defense Logistics Agency under the Department of Defense as a subcontract, with performance expected to support military and defense logistics operations worldwide. The solicitation was posted on July 20, 2026, and the contract is linked to award number SPE1C126F5273, indicating an active and ongoing procurement effort within the DLA supply chain.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

N/A
View Details
NAICS: 321920
DIBBS
Pallet and Wood Packaging Material SupplyThe contract seeks the supply of new 48 inch by 40 inch GMA pallets and associated wood packaging materials that comply with the international phytosanitary standard ISPM 15. All wood packaging must undergo either heat treatment or kiln-drying to eliminate pests and carry the official HT stamp marking required for international transit. The materials must meet strict quality and safety standards to ensure they are suitable for global shipping environments without posing biological risks. The contract is structured as a subcontract under the NAICS code 321920, which aligns with the manufacturing of other wood products, and is managed by the Fluid Handling Division within the Department of Defense. Bids must be submitted by July 30, 2026, with the solicitation posted on July 19, 2026. The place of performance and specific delivery locations are not detailed in the provided data, but the requirement for ISPM 15 compliance implies the end use involves overseas shipping. The contract does not specify a set-aside status or small business preferences. Interested parties must access the official solicitation via the provided DIBBS link to obtain full technical specifications, quantity requirements, delivery schedules, and certification protocols necessary for participation.
FLUID HANDLING DIVISION

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 321920
SLED
Wooden and Concrete Utility Pole SupplyThe City of Elizabeth City in North Carolina is seeking suppliers to provide treated wooden or pre-stressed concrete utility poles for use in power line support structures. This subcontract opportunity is open for bids with a response deadline of July 28, 2026, and the solicitation was posted on July 18, 2026. The NAICS code 321920 indicates the classification pertains to other wood product manufacturing, aligning with the production of treated wooden poles, while pre-stressed concrete poles are also eligible under this requirement. The place of performance is not explicitly detailed, but the procurement is tied to infrastructure needs within the jurisdiction of the City of Elizabeth City. Bidders must be prepared to meet the technical specifications for durability, load capacity, and treatment standards for either material type, as the poles are intended for long-term deployment in utility networks. There is no set-aside designation specified, and the contract does not indicate a preferred vendor type. All proposals must be submitted via the provided online portal before the deadline to be considered.
City of Elizabeth City

POSTED

10 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 321920
SLED
Pole Supply – Wooden Utility Pole Manufacturing/SupplyA utility-grade wooden pole is being supplied under a subcontract to meet specific technical requirements for class, length, and preservative treatment, ensuring durability and compliance with industry standards for electrical or telecommunications use. The pole must be manufactured and delivered to a remote location in Etna, Northern California, where logistical challenges due to remoteness may impact transportation and scheduling. The work falls under NAICS code 321920, which classifies it as other wood product manufacturing, indicating the focus on specialized timber processing rather than mass-produced items. The contract was posted on July 16, 2026, and is managed under the California State Water Resources Control Board’s Division of Water Quality, suggesting the pole will support infrastructure related to water quality monitoring, environmental compliance, or utility lines serving regulated facilities in the region. Delivery must align with project timelines, and the pole must withstand environmental conditions typical of Northern California’s varied terrain and climate.
SWRCB, Division of Water Quality

POSTED

12 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332410
New
DIBBS
DUCT ASSY, OIL COOLEThe contract is for the procurement of 40 units of a duct assembly for an oil cooler, identified by NSN 1560-00-421-2074, with a delivery window of 365 days after delivery order issuance. The solicitation number is SPE4A7-26-R-0693, posted on July 28, 2026, with responses due by August 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons, regardless of location, and requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to the data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory export control training, and have been formally approved by DLA. Additionally, the contractor must be a CMMC Level 2 certified third-party assessment organization and must comply with physical identification and bare item marking requirements. The procurement is managed by the Department of Defense's ASC Supplier Oper AE and AF Division.
Power Boiler and Heat Exchanger Manufacturing

POSTED

11 minutes ago

DEADLINE

in 30 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Freight Logistics (Ocean & Land)The contract involves the transportation of packaged insulation blankets from origin to destination, with a requirement that all overseas shipments be conducted using U.S.-flag vessels in compliance with 10 U.S.C. § 2643. Transportation is governed by FOB origin terms, meaning the seller is responsible for delivering the goods to the named origin point, after which risk and responsibility transfer to the buyer. The scope includes both domestic and international freight logistics encompassing ocean and land modes to ensure timely and compliant movement of the materials. The solicitation is classified as a subcontract under the NAICS code 483111, which pertains to deep sea foreign transportation of freight. It was posted on July 27, 2026, with a response deadline of August 24, 2026, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for potential bidders to review terms and submit proposals.
Deep Sea Freight Transportation

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 323111
New
DIBBS
Defense-Compliant Packaging and PreservationThe contract requires the packaging and preservation of insulation blankets in full compliance with MIL-STD-2073-1E, encompassing all steps necessary for proper defense-standard handling including preservation techniques, wrapping methods, unit containment designated as D3, and labeling according to MIL-STD-129. All items must be palletized following the specifications outlined in DLA RP001 to ensure uniformity, transport readiness, and compatibility with Department of Defense logistics systems. The work must meet exacting military standards for durability, protection against environmental degradation, and traceability throughout the supply chain. This is a subcontract opportunity issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities, though the actual task involves specialized military packaging operations. The contract does not specify a set-aside classification or geographic performance location, and all submissions must adhere strictly to the referenced military standards without deviation to ensure full acceptance by defense logistics authorities.
Commercial Printing (except Screen and Books)

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 561990
New
DIBBS
Government Surplus Material Inspection and HandlingThe contract requires comprehensive inspection, verification of government ownership, and proper handling of surplus materials under strict quality standards, with zero non-conformances permitted. All sampling and evaluation must adhere to MIL-STD-1916 or ASQ H1331 protocols, ensuring rigorous compliance and defect-free outcomes throughout the process. The work involves confirming the legitimacy and status of surplus items prior to handling, with no tolerance for deviations from established quality controls. This subcontract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and falls under the NAICS code 561990 for other support services. The solicitation was posted on July 27, 2026, with responses due by August 24, 2026. The place of performance and specific location details are not provided, but the work is tied to government surplus material management under federal oversight. The contract emphasizes accountability, adherence to military standards, and complete documentation to support government property control and disposition requirements.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Insulation Blanket ManufacturingThe contract seeks the manufacture of aircraft cabin insulation blankets compliant with NSN 1680-01-581-8998 and part number 724E4103-32, adhering precisely to the technical requirements established by Triumph Fabrications-St. Louis Inc and the Defense Logistics Agency. The work must meet all specified material, dimensional, and performance standards to ensure compatibility and safety in military aircraft environments. Submission deadlines are set for August 24, 2026, with the solicitation posted on July 27, 2026, indicating a timeline for qualified manufacturers to respond. This transaction is categorized as a subcontract under NAICS code 336412, signaling involvement in aerospace product and parts manufacturing. Performance is expected to support Department of Defense operations overseen by the ASC SUPPLIER OPER AE AND AF DIV, with no set-aside provisions specified, allowing open competition among eligible contractors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 484220
New
DIBBS
Traceable Freight and Delivery LogisticsThe contract requires the transport and final delivery of completed cable assemblies from the manufacturer to DLA Distribution in Barstow, California, using a traceable freight method with parcel post explicitly prohibited to ensure full shipment accountability and security. The work must be performed under NAICS code 484220, which classifies it as transportation services for trucks and other freight. The place of performance is designated as Yermo, California, with a zip code of 92398-5048, indicating the operational scope centers around logistics coordination in that region, even though the ultimate delivery endpoint is Barstow. This is a subcontract awarded by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a posted date of July 27, 2026, and a strict response deadline of July 30, 2026, leaving a narrow window for potential vendors to submit proposals. The requirement for traceable shipping underscores the critical nature of the cargo, which involves sensitive or mission-critical cable assemblies, necessitating end-to-end visibility, documentation, and secure handling procedures throughout transit. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors capable of meeting the stringent logistics demands without restrictions based on business size or ownership type.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-Compliant Packaging and Labeling ServicesThe contract requires certified packaging, labeling, and marking services fully compliant with MIL-STD-2073-1E and MIL-STD-129 for defense logistics shipments, ensuring all materials meet rigorous military standards for handling, storage, and transport. Comprehensive hazard communication documentation must be included to support safety and regulatory compliance across the supply chain. The work is designated as a subcontract under NAICS code 493190, which covers warehousing and storage services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance must be conducted at the designated location in Yermo, California, with the zip code 92398-5048. Responses are due by July 30, 2026, with the solicitation posted on July 27, 2026, and all submissions must align with the specified military standards and timelines to qualify for award.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334390
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingA single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-586-8572 is being manufactured under a subcontract requiring full compliance with military specifications for design, engineering, and production. The work involves creating a highly specialized cable assembly tailored for defense applications, with all deliverables expected to meet stringent performance, durability, and safety standards. The finalized product must be prepared for FOB origin delivery to the designated location in Yermo, California, zip code 92398-5048, ensuring all logistics and packaging requirements are fulfilled prior to shipment. The solicitation was posted on July 27, 2026, with a tight response deadline of July 30, 2026, indicating a rapid turnaround expectation for potential subcontractors. The contract falls under NAICS code 334390, which pertains to other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. While no set-aside designation or point of contact is provided, the urgency and specificity of the requirement imply a critical operational need, and only eligible contractors with proven capabilities in military-grade electrical systems should respond. All submissions must demonstrate full alignment with the technical and compliance requirements of the NSN specification.

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract pertains to the procurement of a single special-purpose electrical cable assembly with NSN 6150-01-586-8572, under solicitation SPE4A7-26-T-547L, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 20 days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and shipment must be conducted via traceable means, excluding parcel post. The delivery point is the DLA Distribution Barstow Central Receiving Warehouse, while the freight shipping and markfor address is the Yermo Annex Warehouse in California. The contract incorporates comprehensive technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and mandates adherence to MIL-STD-1916 or equivalent zero-based sampling plans with zero non-conformances required unless otherwise specified. Configuration change management and variance requests are governed by formal engineering change proposals. The supplier must comply with CMMC Level 2 self-assessment requirements for cybersecurity and is subject to government oversight with specific controls for identification, handling, and distribution of covered defense information. The unit of issue is each, priced as a single unit, with delivery due no later than June 26, 2026, and the contract is subject to Federal acquisition regulations and defense-specific compliance protocols.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333611
New
DIBBS
PARTS KIT, COOLING TThe contract is for a Parts Kit, Cooling Turbine with NSN 1660-01-161-9773, requiring 134 units to be delivered within 300 days of award. Manufacturing may involve casting or forging operations, necessitating specialized tooling that the government may not possess, and suppliers must submit a Casting and Forging Assistance Request through official DLA channels for support. The item is subject to stringent technical and quality requirements referenced in the DLA Master List, with applicable standards including MIL-STD-1916 or ASQ H1331 for sampling, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required unless otherwise stated, and measuring and test equipment must comply with specified standards. The supply is subject to DLA packaging requirements and inspection and acceptance at origin, with government identification to be removed from non-accepted items. Technical data associated with the item is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons anywhere, including domestic subsidiaries or foreign nationals employed by U.S. firms. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and DLA authorization may access such data. Additionally, the contractor must be Cybersecurity Maturity Model Certification Level 2 certified by a third-party assessment organization, and the contract includes physical identification and bare item marking requirements. The solicitation, issued under SPE4A7-26-Q-0893, closed for responses on August 7, 2026, and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Shenita Tirado as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THREADThis contract specifies the procurement of a stud with a continuous thread, identified by NSN 5307-01-502-8735 and part number M1222ST4N12C372NCNN, with a quantity of 21 units to be delivered within 137 days under solicitation SPE4A7-26-T-596V. The item must comply with MIL-DTL-1222J technical specifications, including mandatory surface markings of material symbol, manufacturer’s symbol, and lot number directly applied per MIL-DTL-1222, with precedence order for small fasteners and packaging labeling as fallback. Manufacturer symbols must be registered in MIL-HDBK-57. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, along with adherence to CDRL-COQC-19071 and other quality assurance provisions including RQ001, RQ006, RQ009, RQ011, and RQ017. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise stipulated. The item is designated as a critical application, and no mercury or mercury-containing compounds may be intentionally introduced into the hardware or its packaging, except for specified functional uses per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and marking protocols, including MIL-STD-129 labeling and prohibition of mercury in preservation or packaging per IP056. Palletization follows DLA packaging requirements. Delivery is FOB origin with no quantity variance permitted, inspected and accepted at origin. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 20, 2026, and original delivery date of February 14, 2027. Unit of issue is each, and the contract references DLA’s Master List of Technical and Quality Requirements for applicable technical and quality standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SHIMThis contract specifies the procurement of two precision shims with NSN 5365-01-503-7958 under solicitation SPE4A7-26-T-596H, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance must occur at the manufacturer’s facility. The shims are designated as critical application items, with approved part numbers listed for DACO Precision Inc, Fastenal Company, and JLG Industries, Inc. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, marked according to MIL-STD-129 with no special marking codes, and palletization must follow RP001 guidelines. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post, with delivery directed to the Norfolk Naval Shipyard in Portsmouth, VA. Quality assurance is governed by a suite of DLA technical and quality requirements, including tailored higher-level quality provisions, inspection and acceptance at origin, removal of government identification from non-accepted items, and physical identification of bare items. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment used must meet RT001 standards. The contract references the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date. The unit of issue is each, with a total price of $2.00 per unit, and the required delivery date is May 19, 2026. All technical, packaging, and inspection mandates are binding and must be strictly followed to ensure compliance and acceptance.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details