PANEL ASSEMBLY, FAIRING

PANEL ASSEMBLY,FAIRING
PANEL ASSEMBLY, FAIR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPARES: OMIT ALL ATTACH HOLES
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SPE4A1-27-T-0319
SECTION B
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
TDP Rev A Gen 3 IAW BASIC DRAWING NR 98897 4J33875 REVISION NR C DTD 06/22/1983 PART PIECE NUMBER: 4J33875-103B
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 LS34347 REVISION NR DTD 08/14/1967 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP59-007 REVISION NR F DTD 09/07/2005 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 4J32515 REVISION NR M DTD 06/21/1986 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP59-405 REVISION NR DTD 11/30/1966 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP60-401 REVISION NR J DTD 08/15/1990 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 LS5365 REVISION NR DTD 12/16/1957 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 DS5025 REVISION NR BB DTD 03/02/2026 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP60-505 REVISION NR AA DTD 06/23/2025 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 0581 REVISION NR BC DTD 11/02/2023 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STM28-003 REVISION NR C DTD 06/09/1983 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP51-302 REVISION NR AJ DTD 05/28/2026 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98752 200415485 REVISION NR E DTD 01/30/2020 PART PIECE NUMBER:
TDP Rev A Gen 3
SPE4A1-27-T-0319
SECTION B
IAW REFERENCE DRAWING NR 98897 STP60-401
REVISION NR J DTD 03/21/2012
PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 1-934 REVISION NR A DTD 09/17/1956 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STM28-003 REVISION NR C DTD 10/18/2018 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98752 2020111556 REVISION NR A DTD 08/22/2023 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98752 2020111556 REVISION NR A DTD 10/04/2023 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 98897 STP63-001 REVISION NR Y DTD 12/18/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019029450 0001 EA 1.000
NSN/MATERIAL:1560002467273
DELIVERY (IN DAYS):0557
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE4A1-27-T-0319
SECTION B
PR: 7019029450 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:01/14/2028
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0180
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
SPE4A1-27-T-0319
SECTION B
PR: PRLI: CONT’D
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A1-27-T-0319 NSN/Part Number: 1560-00-246-7273 Quantity: 1 EA Purchase Request: 7019029450QTY: 1 Delivery: 557 days ADO