Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PANEL, INTERFACE DEV

Active
SPE4A5-26-T-336KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a PANEL, INTERFACE DEV, identified by NSN 4920-01-659-7555 and part number 8M0086566, with a quantity of five units to be delivered under solicitation SPE4A5-26-T-336K. The item is classified as a commercial off-the-shelf (COTS) product and must comply with DLA’s packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandatory unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Delivery is to be made via the fastest traceable means, excluding parcel post, to the specified freight address in Baltimore, MD, under a fixed price of $5.00 per unit totaling $25.00. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Physical identification and bare item marking are required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The original required delivery date is August 3, 2026, and the contract is subject to strict zero variance in quantity.

General Info

Five COTS interface panels delivered FOB origin by August 3, 2026, at $5 each, complying with military standards and CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2401 HAWKINS POINT RD, BALTIMORE, MD, 21226-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-336K for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PANEL,INTERFACE DEV
PANEL,INTERFACE DEV
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
BRUNSWICK CORP 88907 P/N 8M0086566
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744594 0001 EA 5.000
NSN/MATERIAL:4920016597555
SPE4A5-26-T-336K
SECTION B
PR: 7017744594 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
ZZ5212
COMMANDER, SFLC SBPL
SMALL BOAT PRODUCT LINE (SBPL)
2401 HAWKINS POINT RD
BALTIMORE MD 21226-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
ZZ5212
COMMANDER, SFLC SBPL
SMALL BOAT PRODUCT LINE (SBPL)
2401 HAWKINS POINT RD
BALTIMORE MD 21226-5000
US
M/F: (TCN) ZZ521262090182
RDD:
PROJ: TP 2
SUPP ADD: Z31800 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: 26 FC: SN
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A5-26-T-336K NSN/Part Number: 4920-01-659-7555 Quantity: 5 EA Purchase Request: 7017744594QTY: 5 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
Electronic Shielding Gasket ManufacturingThe contract pertains to the manufacture and delivery of three units of EMI shielding gaskets, identified by NSN 5999-01-680-5759 and part number PG632000-05, all of which must fully comply with Department of Defense technical and military specifications. The work is classified as a subcontract under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Active Devices Division under the Department of Defense. There is no specified set-aside type, and the place of performance and point of contact details are not provided in the data, though all deliverables must meet the stringent standards required for military applications. The contract is accessible via a public DIBBS platform link for further submission and reference.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
HOUSING, ELECTRONIC COM
Solicitation # SPE7M0-26-T-034M
This contract, issued under solicitation number SPE7M0-26-T-034M by the Department of Defense through the Maritime Supply Chain ESOC Buys office, requires the delivery of 10 units of electronic component housings identified by NSN 5999-01-619-4168 and part number BNG-410-01 from L3 Technologies, Inc. Delivery must be completed within 10 days of award, shipped FOB origin, and received at Fort Bragg, North Carolina, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation, wrapping, and marking requirements with no special marking codes applied. The packaging and shipment must also comply with DLA’s overarching packaging requirements and hazardous materials protocols when applicable, and parcel post is explicitly prohibited — all shipments must use fast, traceable methods. The contractor must ensure compliance with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and may not use any Class I ozone-depleting substances in manufacturing or processing unless formal written approval is obtained from the Contracting Officer — this restriction does not extend to commercial items or part-numbered-only items. Any substitution of the approved part number, whether through administrative change or superseding item, requires official documentation from the original manufacturer and prior approval from the Product Specialist or Authorizing Engineering Support Activity to be considered for award; otherwise, the offer will be deferred to future solicitations. Delivery is tied to an original required date of August 5, 2026, with government-specific identifiers and tracking information including RDD E, project TP 2, and the contract data interface code A0A, all governed by the DLA electronic procurement system and applicable FAR and military standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-398Y
This contract specifies the procurement of a linear microcircuit under Federal Supply Class 5962, with the part number 5962011671655 and a quantity of four units, to be delivered within 151 days from the contract award date. The item must conform to strict technical and quality requirements referenced through the DLA Master List, including mandatory supply chain traceability documentation per Procurement Note C03, and adherence to the DLA Land and Maritime Form 918, which must be submitted electronically at least 15 days before delivery and approved in writing prior to shipment. Failure to comply with traceability, documentation, or shipping authorization protocols may result in non-final payment. Each unit must be marked per IPC/JEDEC J-STD-609 to identify lead content and packaged with ESD/EMI protective materials meeting MIL-PRF-81705 specifications, using qualified barrier materials from the QPL-81705 list, with appropriate cushioning to prevent damage to leads. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special marking codes and preservation methods applied. The product must be free of intentional mercury contamination, except in specified exceptions, and must originate from an approved source as defined by the contract's modified definition of “exact product.” The item is designated as critical and requires cybersecurity compliance at CMMC Level 2, and delivery is FOB origin to the DLA distribution center in Columbus, Ohio, with no tolerance for surplus or nonconforming material.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5911
The contract pertains to the procurement of 17 Push Switches with NSN 5930-01-537-4120 under solicitation SPE7M8-26-T-5911, issued by the Department of Defense’s Electrical Devices Division. The delivery deadline is set for 413 days after award, with responses due by August 20, 2026. The item is subject to stringent cybersecurity compliance, requiring the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization, indicating the need for robust cybersecurity practices aligned with Department of Defense standards. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training, and have received formal approval from DLA. Additionally, packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is identified as New Cumberland, PA, with primary point of contact Dondiego Boler reachable via email and phone.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
FIXTURE, ENGINE MAIN
Solicitation # SPE4A5-26-T-337N
This solicitation, SPE4A5-26-T-337N, is a total small business set-aside for a fixture, engine main, with a quantity of four units and a delivery requirement of 166 days after contract award. Offerors must submit quotation ranges due to fluctuating demand and frequent quantity adjustments on open purchase requests, as this allows the buyer to consolidate or reduce orders without administrative delays or resolicitation. Fast Pay is not applicable, and quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-procurability. All offerors must certify they will not supply covered telecommunications equipment or services restricted under FAR 52.204-24 and DFARS 252.204-7016. Domestic sourcing restrictions under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit required representations for eligibility under specific categories including service-disabled veteran-owned, women-owned, and economically disadvantaged women-owned small businesses. Vendors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their internal schema. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any proposed AM-produced items will be disqualified from evaluation or award. The solicitation is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Steven Lewis as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
HEAT SINK-INSULATOR
Solicitation # SPE7M5-26-T-399S
The contract is for a single unit of a heat sink-insulator identified by NSN 5999-33-208-8134 and referenced under multiple part numbers including P/N 90100001769-00A, N1790, and SALWICO ISOLATOR-A, supplied by authorized vendors such as CONSILIUM MARINE & SAFETY AB and L3 MAPPS LTD. The item is designated as a critical application component and must comply with the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is required within 20 days from the contract date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking governed by MIL-STD-129 and no special markings required. The item must be shipped via traceable freight, not parcel post, to the designated naval warehouse in Norfolk, Virginia, with a required delivery date of May 14, 2026. The procurement is governed by solicitation SPE7M5-26-T-399S, with a response deadline of August 20, 2026, issued under NAICS code 334419 by the Department of Defense’s Active Devices Division, and the contract is subject to federal acquisition regulations with designated government tracking identifiers for processing and distribution.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M5-26-T-398B
This contract pertains to the procurement of four rotary switches with NSN 5930-01-593-1045 under solicitation SPE7M5-26-T-398B, with a total quantity of 90 units required for delivery within 268 days of award. The item is governed by strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the cited source-controlled drawing mandates that all components must be sourced exclusively from approved suppliers listed on the drawing, with offers constituting agreement to this restriction. The product incorporates one or more components subject to Qualified Products Lists or Qualified Manufacturers Lists, and must adhere to specified configuration management protocols including the submission of Engineering Change Proposals or variance requests. The contractor is required to comply with all DLA packaging requirements and must not use Class I ozone-depleting chemicals under any circumstances, with substitutions subject to approval. The contract imposes significant compliance obligations including cybersecurity certification at CMMC Level 2, adherence to export control regulations under ITAR or EAR, and the restriction of technical data access only to contractors who hold valid US/Canada Joint Certification Program credentials, have completed required DLA training, and have received formal approval. Specialty metal requirements trigger the applicability of specific DFARS clauses, and inspection and acceptance must occur at the vendor’s origin. First article submission is mandatory, requiring the contractor to mark shipping containers in bold red lettering, provide written advance notice of shipment to the testing facility, and submit completed exhibits along with test reports, material certifications, operational sheets, and manufacturing drawings conforming to DI-NDTI-80809B. Government fit verification testing on the next higher assembly is required, and manufacturing production quantities before formal acceptance carries full vendor risk. Technical data associated with this item is tightly controlled and cannot be disclosed to foreign persons without prior authorization, with violations subject to severe compliance consequences.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7LX-26-U-9349
The contract is for a branched wiring harness with part number 1972960 and NSN 6150013696087, procured under solicitation SPE7LX-26-U-9349 by OSHKOSH DEFENSE LLC for the Department of Defense. A quantity of 460 units is requested at a unit price of $460.00, totaling $211,600, with delivery required within 158 days FOB origin. The item is covered under DLA Direct CONUS procurement and is subject to strict compliance with DLA packaging standards per RP001, MIL-STD-2073-1E, and MIL-STD-129 for marking, with no special marking required. Packaging must use unit container E5, intermediate container E5, and follow prescribed preservation methods including dry cleaning and no cushioning materials. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the contractor must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment, and the contract includes a zero variance allowance on quantity. All deliveries are subject to inspection and acceptance at the destination. The contract was posted August 9, 2026, with responses due by August 24, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-399Z
This contract pertains to the procurement of a shielding gasket for electronic applications, identified by NSN 5999-01-680-5990 and part number PG632000-06, with a quantity of three units. The item must comply with technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including specific methods for preservation, wrapping, and containerization using E5 unit containers with an OPI marking. The gasket is to be marked in accordance with MIL-STD-129 without any special marking code. Delivery is required within 20 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the point of origin. The destination is the Danish Defence Supply Agency in Vojens, Denmark, with Lars Hansen listed as the point of contact. Freight forwarding instructions reference DLA procedural notes C19 and C20, and the shipment is tied to project TP 2 under the contract number SPE7M5-26-T-399Z. The required delivery date is August 13, 2026, and the solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. The acquisition falls under NAICS code 334419 and is managed by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-14QV
This contract specifies the procurement of a cable assembly under solicitation SPE4A6-26-T-14QV for a quantity of 10 units with a delivery period of 347 days, to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 6150-20-007-7054 and must adhere strictly to DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. Packaging must be palletized in compliance with DLA procurement guidelines and fully exempt from any mercury or mercury-containing compounds in preservation, packaging, or marking processes. The contract enforces zero tolerance for non-conformances under sampling protocols that align with MIL-STD-1916 or ASQ H1331, applying stringent verification levels for critical, major, and minor attributes with zero acceptance criteria unless otherwise stated. The supplier, DRS Technologies Canada Ltd., is required to comply with all technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and all hardware must be free of intentional mercury use except in narrowly defined exceptions such as functional batteries or instrument sensors specified by NAVSEA, which must include secondary containment. The delivery date is set for July 31, 2027, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
ADAPTER, MECHANICAL
Solicitation # SPE7M0-26-T-035C
The contract is for one mechanical adapter with NSN 4940-01-381-1029 and part number VV86125103, issued under solicitation SPE7M0-26-T-035C by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at origin, and the item must be packaged per ASTM D3951 unless superseded by stricter DLA Master List of Technical and Quality Requirements, with all packaging labeled according to MIL-STD-129 and palletized per DLA packaging guidelines. The unit of issue is each, with a single unit ordered at a unit price of one dollar, totaling one dollar. The supplier is Falcon Supply located in Hoogerheide, Netherlands, with delivery instructions referencing DLAD Proc Notes C19 and C20 for transportation routing. The original required delivery date is August 12, 2026, and the contract includes specific government use codes and a point of contact at DLA for inquiries. All technical and quality standards referenced are governed by the DLA Master List, with version control tied to the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
JACKING DEVICE, GEAR
Solicitation # SPE4A5-26-T-336P
The contract pertains to the procurement of a jacking device, gear, part number 785E524G01, manufactured by General Electric Company, for use on a gear assembly SPD DECR. The item is identified by NSN 2010010328949 and is solicited under contract SPE4A5-26-T-336P with a required quantity of two units, delivered in AY units. Delivery is mandatory within 166 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation methods 20 and packaging material code 01, with wrapping, cushioning, and packing standards as specified. Marking must follow MIL-STD-129 with no special marking required. The destination for delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The original required delivery date is November 16, 2027, though a need ship date is set for January 31, 2027. The contract adheres to all DLA packaging and technical requirements referenced in the DLA Master List, and all provisions for cybersecurity maturity model certification level 2 self-assessment have been incorporated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or marking, except for specific functional exemptions outlined in NAVSEA 5100-003D. The item must be delivered with zero quantity variance, and the supplier must ensure compliance with all applicable defense standards and regulations without exception.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 000000
New
DIBBS
INCLINOMETER, VEHICULAR
Solicitation # SPE4A5-26-T-337C
The contract specifies the procurement of 18 units of a vehicular inclinometer with NSN 6695-01-738-6848 and part number P/N 1017W1SPL3-9/10A from RIEKER INSTRUMENT CO., INC. under solicitation SPE4A5-26-T-337C. Delivery is required FOB origin within 166 days, with a ship date of January 31, 2027, and an original required delivery date of May 16, 2027. Quantity is strictly fixed at 18 units with zero variance allowed. Inspection and acceptance both occur at origin, governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise noted; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements. The item must be identified per RQ017 and all non-accepted supplies must have government identification removed per RQ011. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation details are governed by DLAD Proc Note C19 for shipment and C20 for first destination. The unit of issue is each (EA), and the contract is subject to the revision of technical standards in effect on the solicitation issue date.

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURB
Solicitation # SPE4A5-26-T-336T
The contract pertains to the procurement of a SHROUD SEGMENT, TURB with NSN 2840-01-689-4843 and part number 5200T09G09, under solicitation SPE4A5-26-T-336T. A total of 73 units are required at a unit price of $73.00, with full payment due upon delivery. The item must be delivered FOB origin within 166 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Packaging and palletization must conform to DLA’s procurement requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and attributes must be verified at specified acceptance quality levels. The item is subject to removal of government identification if not accepted, and physical identification must be marked per RQ017. The unit of issue is each (EA), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 25, 2027, with a need ship date of January 31, 2027. The contracting office is under the Department of Defense, with Kirstie Ragsdale listed as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A5-26-T-337E
The contract pertains to the procurement of a solenoid, electrical, identified by NSN 5945-00-150-3034 and part number 37073 from Hamilton Sundstrand Corporation, with a quantity of six units. The item is classified as a commercial item and is designated as a critical application item with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with individual unit packing marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes, following strict placement guidelines. Marking of shipments must comply with MIL-STD-129, including the special marking code ZZ for additional requirements, and palletization must follow DLA standards. Sampling requirements mandate zero non-conformances using MIL-STD-1916 or an equivalent zero-based plan, with acceptance levels set for critical, major, and minor attributes as specified. The unit of issue is EA, with a fixed quantity and zero variance permitted. Delivery is FOB origin with inspection and acceptance occurring at destination, within 399 days of contract award. The item requires no Unique Identification, per DFARS 252.211-7003(c)(1)(i). The delivery destination is DLA Distribution Cherry Point in North Carolina, with a required ship date of April 5, 2026, and an original delivery deadline of August 8, 2027. Transportation and freight instructions are governed by specific DLA procedural notes, and all documentation must align with the approved solicitation SPE4A5-26-T-337E.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
INSTALLER, SEAL
Solicitation # SPE4A5-26-T-337S
The contract is for the supply of an installer seal with NSN 5120011507031 and part number 7070077311041, under solicitation SPE4A5-26-T-337S, with a requirement for seven units to be delivered within 20 days FOB origin. The item is designated as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-2073-1E for packaging. Packaging specifications require adherence to MIL-STD-129 for marking, with no special marking codes, and palletization must follow DLA packaging guidelines. Sampling for acceptance follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i). The delivery is to be made to the Commanding Officer, INS TUNIR, in Ghatskopar West, Mumbai, India, with the required delivery date set for August 13, 2026. Pricing is fixed at $7.00 per unit for a total of $49.00, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and transportation details reference DLAD procedural notes C19 and C20. The contract mandates use of the DoD authorized unit of issue and specifies the purchase request number 7017810544. Government-specific identifiers include DODIC A01, distribution code F9B, and project code TP 2. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Sean Moore as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326130
New
DIBBS
PLASTIC SHEET, ADHES
Solicitation # SPE4A5-26-T-336H
The contract specifies the procurement of adhesive-coated plastic sheeting identified by NSN 9330-01-581-2003, with a total quantity of three rolling units, each equal to 60 feet, for delivery within 20 days of award. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ017 for physical identification and marking, RC001 for documentation during source approval, and RQ001 for tailored quality requirements applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA standards, and all materials require shelf life code H, meaning they must be stored at 70 degrees Fahrenheit with no more than 50 percent relative humidity and have a 12-month shelf life. Inspection and acceptance occur at the origin, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Alternative offerors must submit a complete data package covering both the approved and alternate parts, as no data is currently available. The solicitation number is SPE4A5-26-T-336H, posted on August 9, 2026, with responses due by August 17, 2026, and performance is directed to Elizabeth City, North Carolina, under the U.S. Department of Defense, ASC Supplier Operations OEM Division.
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-336S
The contract is for the supply of 145 units of an O-RING with NSN 5331016997328 and part number 68-1452 under solicitation SPE4A5-26-T-336S, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The item must be delivered FOB origin within 122 days of contract award, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1 using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. All packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 prohibiting bending. Mercury and mercury compounds are strictly prohibited in any preservation or packaging materials. Palletization and packaging follow DLA’s RP001 requirements, and transportation instructions are governed by DLAD proc notes C19 and C20. The delivery destination is Hill AFB, Utah, with a required ship date of December 18, 2026, and an original delivery deadline of June 8, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date as applicable. Unit of issue is each (EA) at a unit price of $145.00, totaling $21,025.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BAR ASSEMBLY, STEERI
Solicitation # SPE4A5-26-T-337T
The contract pertains to the procurement of a Bar Assembly, Steering, identified by NSN 4920-01-156-0944 and part number 70700-77112-041, with a required quantity of six units to be delivered within 20 days from the contract award. The item must comply with stringent DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking requirements in accordance with MIL-STD-129, with no special marking designated. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The product is subject to strict configuration change management and requires a formal Engineering Change Proposal or variance request for any deviations. Technical data is proprietary and insufficient for competitive sourcing, with suggested suppliers including Grain Valley Tool & Mfg. Co. and EDR Industries Inc., both holding the same part number. The item must adhere to cybersecurity requirements under CMMC Level 2 self-assessment, and no mercury or mercury compounds are permitted in packaging or preservation. The delivery is FOB origin, with inspection and acceptance occurring at origin, and the end destination is the Commanding Officer, INS TUNIR in Mumbai, India. The sole point of contact for the solicitation is Hien-Van Trinh, and the contract was issued under solicitation number SPE4A5-26-T-337T with a response deadline of August 17, 2026, and an original required delivery date of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CALIBRATOR, TEMPERAT
Solicitation # SPE4A5-26-T-336J
The contract pertains to the procurement of one Fluke Electronics Corp Calibrator, Temperature, model P/N 9142-A-156, identified by NSN 6685-01-718-0114, with a requirement for delivery within 20 days of contract award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; inspection and acceptance occur at the destination point. Delivery is FOB origin, and shipment must be transported via traceable means, not parcel post, to the specified delivery address aboard the USNS HECTOR A CAFFERATA in San Diego, California. The contract prohibits any variance in quantity, with a firm requirement of exactly one unit priced at the quoted amount. The contract reference is SPE4A5-26-T-336J, with a required delivery date of August 3, 2026, and the solicitation was issued on August 9, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334512, and the point of contact is Rosa Tyiska of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A5-26-T-337J
This contract specifies the procurement of 72 headless, grooved pins with part number 204-001-766-001 and NSN 5315-00-077-2130, sourced from Bell Textron Inc, under solicitation SPE4A5-26-T-337J. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or equivalent AQLs of 0.1, 1.0, and 4.0. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and manufacturer selection of attribute or variable inspection is permitted. The pins are designated as a critical application item and require strict adherence to packaging standards, including ASTM D3951 and mandatory compliance with MIL-STD-129 for marking and labeling, while palletization follows DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin, with inspection and acceptance occurring at destination, and must be completed within 166 days from the contract date, with an original required delivery date of August 20, 2028, and a need ship date of January 31, 2027. Packaging must be labeled with the specified QUP of 001 and shipped to DLA Distribution Cherry Point, North Carolina, in accordance with freight and transportation procedures C19 and C20. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies as per applicable directives.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details