Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PANEL, MODULAR, HANGING

Active
SPE2DH-26-T-5768Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.

General Info

One modular trauma panel, MOLLE-compatible, with ten labeled pockets for rapid combat medical use, due to Fort Bliss in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5768.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PANEL,MODULAR,HANGING TRAUMA
PANEL,MODULAR,HANGING TRAUMA
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
UNIT OF ISSUE-EACH
SPECIAL FEATURES: RAPID ACCESS MODULAR MEDICAL PANEL-TRAUMA;
COLOR:BLACK, CODURA NYLON, MOLLE COMPATIBLE, MODULAR MEDICAL PANEL
DESIGNED TO INTEGRATE WITH ALL MILITARY AIRCRAFT, GROUND VEHICLES, AND
FIXED OR TEMPORARY FACILITIES; THE PANEL PROVIDES ORGANIZED STORAGE WITH
IMMEDIATE ACCESS TO MEDICAL EQUIPMENT AND SUPPLIES USED DURING THE
MANAGEMENT OF A COMBAT TRAUMA CASUALTY DURING CASEVAC OPERATIONS; THE
MODULAR HANGING TRAUMA PANEL IS CONSTRUCTED OF BLACK CORDURA NYLON
FEATURING FOUR FULL-WIDTH INTERIOR STORAGE POCKET, ONE HALF-PANEL
BELLOWS POCKET AND SIX SMALL, TWO MEDIUM, ONE LONG, AND ONE FLAT
PALS-MOLLE MODULAR POCKETS; THE PANEL ITSELF IS MARKED ON THE INTERIOR
AND EXTERIOR WITH LOW LIGHT VISIBILITY REMOVABLE PANELS DESIGNING
TRAUMA; EACH MODULAR POCKET IS ALSO MARKED WITH REMOVABLE LOW LIGHT
VISIBLE LABELS; THE PANEL CAN BE RAPIDLY EMPLOYED TO PERFORM "TAIL GATE"
MEDICINE WHEREVER TRAUMA CARE IS REQUIRED ON THE BATTLEFIELD
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-515-7651 Quantity: 1 EA Purchase Request: 7017716143QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-306Y
The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-306U
The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE KIT, ELASTIC, AB
Solicitation # SPE2DS-26-T-306L
The contract specifies the procurement of an elastic abdominal wound bandage kit, designed for use in military trauma scenarios and selected for inclusion in the Warrior Aid and Litter Kit and vehicle-mounted trauma kits for the U.S. Army. Each kit is sterile and contains a high-absorbency white pad measuring 12 inches by 12 inches, an extra-wide secondary dressing, and an application bar. The unit of issue is a kit, with a total quantity of three kits required. The product must have a shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements. The item is identified by NSN 6510-01-532-6656, and the contract solicitation number is SPE2DS-26-T-306L, issued by the Department of Defense’s Medical Supply Chain. Delivery is due within five days of award, with the place of performance listed as Watervliet, New York. The primary point of contact is Tiffany Parker, with email and phone details provided. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, under a federal procurement with NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PLUG, EAR
Solicitation # SPE2DS-26-T-305L
The contract specifies the procurement of 150 pairs of non-linear, small-sized, triple-flange ear plugs in yellow, each pair featuring a detachable cloth cord and packaged in a clear pillow case with a black beaded chain. These ear plugs provide a Noise Reduction Rating of 24 dB when the protective cap is closed and 12 dB when open, meeting specific hearing protection standards. The item is identified by NSN 6515-01-632-4167 and is being requested in three boxes, each containing 50 pairs, with delivery required within 20 days after award. Bidders must supply the exact source and part number as referenced in the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications incorporated into this solicitation. Compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. The solicitation, issued under number SPE2DS-26-T-305L, was posted on August 4, 2026, with responses due by August 10, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office. The primary point of contact is Chandler Alvarez, reachable via email and phone provided in the contract data. The purchase request number is 7017721062, and bidders must ensure their submission aligns with the DLA Master List version in effect on the solicitation issue date, as this determines applicable technical and quality criteria. The contract is a federal procurement and the place of performance is unspecified, but the buyer is located in the United States.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-305N
The contract is for the procurement of 500 hypodermic needles, 16 gauge by 3/4 inch, packaged in units of 100 per package, with a total of five packages required. Each needle must be rigidly packaged in color-coded aluminum hub with a two-piece rigid pack sheath, and all units must meet the Medical Marking Standard No. 1, superseding MIL-STD-129. The product has a shelf life of 60 months, and at the time of receipt by the first government activity, a minimum of 51 months of shelf life must remain. All packaging must be labeled with the manufacturer’s lot or control number and date of manufacture, prefixed with “MFD,” and must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements. The item is regulated by the FDA and requires referral through EBS for confirmation prior to award. Packaging, labeling, and shipment must follow DLA’s specifications, including use of traceable freight methods and exclusion of parcel post. The delivery destination is Fort Campbell, Kentucky, with a required delivery date of August 5, 2026, and a 20-day delivery window from award. The manufacturer is Cardinal Health 200, LLC, with part number 81-200060, and the NSN is 6515-01-529-0566. The quantity is firm and fixed with zero variance allowed, and the contract specifies the unit of issue and purchase unit in accordance with DLA standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-306H
This contract pertains to the procurement of 100 hypo needles, specifically a dental model designated C10A with a 27-gauge size and a length range of 1.125 to 1.50 inches, featuring a threaded design and sterile packaging. The unit of issue is a package containing 100 needles, and the item carries a non-extendable shelf life of 60 months under the RS023 shelf-life requirement for a Type I (Code S) item. Technical and quality specifications referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA requirements under RP001, and all supplies must adhere to regulations for removal of government identification if not accepted, as outlined in RQ011. The item is subject to potential covered defense information rules under RD003. The NSN/part number is 6515-00-181-7412, with a single purchase request for one package. Delivery is required within 20 days after order placement. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-306H, was posted on August 4, 2026, with bids due by August 10, 2026, for delivery to a military post office in FPO with ZIP 96694, under the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, NONADHERENT
Solicitation # SPE2DS-26-T-306B
The contract specifies the procurement of sterile, nonadherent Telfa pads measuring 3 inches by 8 inches, packaged in quantities of 50 per unit, with each pad individually sealed in perforated plastic film on both sides. The pads are made of white cotton nonwoven material and must maintain a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is properly sealed and protected from damage, while shipping containers must be suitable for safe, cost-effective delivery via common carrier to the designated delivery point in APO, ZIP 96260-5479. Labeling must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of the standard are available through DLA Troop Support. The item is classified as a TYPE 2 (CODE 7) with an extendable 36-month shelf life under RS060, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date. The contract, issued under solicitation SPE2DS-26-T-306B, requires delivery within 84 days, with the NSN 6510-00-986-2942 and one purchase request tied to the order.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, OCCLUSIVE, ADH
Solicitation # SPE2DS-26-T-306P
The contract specifies the procurement of TEGADERM TRANSPARENT DRESSINGS, which are sterile, adhesive, occlusive dressings designed for use on peripheral and central IV catheters or as wound dressings. Each dressing measures 2.375 inches wide by 2.750 inches in length and is individually packaged in units of 100 per package. The product must have a non-extendable shelf life of 36 months, with no more than five months allowed to have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection from damage during transit, with exterior shipping containers suitable for safe and cost-effective delivery via common carrier to the specified point of delivery. All items must be marked according to MMS No. 1, and government identification must be removed from non-accepted supplies. The NSN is 6510-01-234-8943, with a single purchase order for one package, requiring delivery within 20 days of award under solicitation SPE2DS-26-T-306P, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF. Bidders must provide the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-305U
The contract specifies the procurement of surgical sponges measuring 4 inches by 4 inches, supplied in sealed envelopes containing two sponges each, with twenty-five envelopes per box and twelve hundred sponges per packaging unit. The product must be sterile, have a uniform shelf life of sixty months, and no more than nine months may have passed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement document, ensuring each unit is sealed and protected from damage, while exterior shipping containers must be suitable for safe transport at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All markings and packaging adhere strictly to Medical Marking Standard No. 1, and suppliers must provide the source and part number being offered. The item is identified by NSN 6510-00-721-9808 with a single purchasing quantity, under solicitation SPE2DS-26-T-305U, response deadline August 10, 2026, and delivery required within twenty days after award. Technical and quality requirements referenced under RP001 and RQ011 are governed by the DLA Master List of Technical and Quality Requirements, and the acquisition is subject to Defense Information potentially applicable under RD003.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, DISPOSABLE
Solicitation # SPE2DS-26-T-307A
The contract is for 8 boxes of disposable bear claw nitrile gloves, each box containing 100 gloves, totaling 800 gloves. The gloves are designed for enhanced grip in both wet and dry conditions, featuring a longer and thicker construction compared to standard gloves, with an extended beaded cuff that provides a form-fitting seal. They are ambidextrous, non-sterile, latex-free, powder-free, and colored sand. The unit of issue is strictly defined as a box of 100, and all supplies must comply with DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies per requirement RQ011. The item is identified by NSN 8415-01-600-6039 under purchase request 7017729616, with a delivery deadline of 20 days after order placement. The solicitation, numbered SPE2DS-26-T-307A, was posted on August 4, 2026, with responses due by August 10, 2026. The contract falls under NAICS code 339113 for medical rubber product manufacturing and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is required at Fort Bragg, North Carolina, 28310, with Marc Canalichio designated as the primary point of contact for inquiries via phone or email. The procurement is a federal solicitation accessible through DIBBS.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-306T
The contract is for the procurement of 25 hypoxydermic needles designated for spinal anesthesia, each featuring a short angular side bevel, a stylet, and a 20-gauge 3.5-inch length with a Luer connection. The needles are individually sealed and sold in packages of 25 units, identified by the NSN 6515-01-156-2419. Full technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date. Packaging must meet DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The solicitation, issued under SPE2DS-26-T-306T, requires bidders to clearly state the source and part number being offered, with a response deadline of August 10, 2026, and a delivery window of 10 days after order placement. The procurement is administered by the Department of Defense’s Medical Supply Chain under NAICS code 339113, with covered defense information applicable and performance expected within the United States.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
COMPARATOR, COLOR
Solicitation # SPE2DH-26-T-5767
The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MOUTH BARRIER, MANIKIN,
Solicitation # SPE2DH-26-T-5774
The contract solicits a single package of fifty disposable adult-sized mouth barrier and lung bag combinations designed exclusively for CPR training purposes, compatible with the Prestan adult CPR training manikin. The item is identified by NSN 6910-01-708-2080 and must comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is a package containing fifty units, with a total order quantity of five packages requested to be delivered within five days of award. The procurement is governed under the federal solicitation SPE2DH-26-T-5774, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 11, 2026, and a posted date of August 4, 2026. Delivery must be made to an FPO address with ZIP 96693, and all supplies must meet the requirement for removal of government identification if not accepted. Primary point of contact is Tina Vu, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333248
New
DIBBS
LITMUS PAPER
Solicitation # SPE2DH-26-T-5777
LITMUS PAPER, ACS, 30’S, identified by NSN 6640-01-485-6075, is procured under solicitation SPE2DH-26-T-5777 with a requirement for one package containing thirty individual units, each individually sealed in foil packets with a printed color chart for pH indication. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is protected from damage and that exterior shipping containers are suitable for safe transport at the lowest cost to the designated delivery point in APO, 96278-2060. The product must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each label must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The shelf life is strictly limited to eighteen months, with no more than three months having passed from the date of manufacture to the date of government delivery. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Additionally, the contract incorporates provisions for the removal of government identification from non-accepted supplies and confirms that covered defense information may apply. The solicitation closes on August 11, 2026, and delivery is required within twenty days of award.
All Other Industrial Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, DEFIBRILLATOR
Solicitation # SPE2DH-26-T-5775
A 12VDC lithium battery with approximately 9.2 grams of lithium content is specified for use with Cardiac Science PowerHEART G5 AEDs, sold in units of each. The battery must be stored between 20°C and 30°C to maintain integrity and performance. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition scale. Packaging must comply with DLA procurement standards, and non-accepted supplies must have government identification removed. Covered defense information provisions may apply. The item is identified by NSN 6135-01-652-9622 with a quantity of four units required under purchase request 7017720173, and delivery is due within 20 days after award. The solicitation number is SPE2DH-26-T-5775, posted on August 4, 2026, with responses due by August 11, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA, with performance located in San Diego, California, and primary point of contact being Tina Vu at tina.vu@dla.mil.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
FLOSS, WAXED, DENTAL
Solicitation # SPE2DH-26-T-5773
The contract specifies the procurement of dental floss, waxed, nylon, 200 yards per roll, for military use under NSN 6520-01-500-1520, with a unit of issue as each and a requested quantity of 25 units. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, issued under SPE2DH-26-T-5773, requires bidders to clearly state the source and part number being offered and targets delivery within 84 days ADO to an APO address with ZIP 09227-0000. The purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and the solicitation closes on August 11, 2026, under NAICS code 325620 for manufacturing of dental appliances and equipment.
Toilet Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5770
The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PANEL, MODULAR, MEDIC
Solicitation # SPE2DH-26-T-5769
The contract calls for two modular medical panels designed for primary care operations in field environments, each constructed from black Cordura nylon with MOLLE compatibility to allow seamless integration with existing military equipment systems. These panels provide organized, immediate-access storage for medical supplies and equipment used to manage sick call patients in operational settings, ensuring efficient triage and treatment capabilities in both fixed and temporary facilities. The item is identified by NSN 6530-01-518-0118, with a requirement for delivery within 20 days of award, and must fully comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging and government identification removal standards. Bidders must clearly specify the source and part number being submitted, as this solicitation is issued under contract number SPE2DH-26-T-5769 by the Department of Defense’s Medical Supply Chain FSH, with performance located at Fort Bliss, Texas. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, under NAICS code 314910 for other textile product mills. Tina Vu of DLA serves as the primary point of contact for inquiries, and all submissions must adhere to DLA procurement and packaging directives applicable to the solicitation issue date, with no set-aside provisions specified.
Textile Bag and Canvas Mills

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5778
The product is a single-use, disposable heat therapy pad designed for instant and consistent pain relief through simple activation by squeezing and kneading. Made with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, it is safe for direct skin application and meets strict safety standards. Measuring 6 by 9 inches, each case contains 16 pads and requires storage at room temperature. The item is identified by NSN 6530-01-724-0439 with a procurement quantity of four cases under Purchase Request 7017729834, with delivery expected within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA regulations including removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DH-26-T-5778 on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense's Medical Supply Chain FSH, with performance at Hurlburt Field, Florida, and primary point of contact Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details