Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

15--PANEL,STRUCTURAL,AI

Active

SPE4A5-26-T-393LFederal

Response Deadline09/03/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the ASC Supplier Oper OEM Division, has issued Request for Quotations SPE4A5-26-T-393L for the procurement of one structural aluminum panel, identified by NSN 1560017189145. The approved source for this item is 97499 901-060-850-113. The item is to be delivered to DLA Distribution W1A8 within 452 days after the order is placed. This solicitation falls under NAICS code 336413 and is subject to the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, including all applicable Buy American and Berry Amendment restrictions. All responsible sources are invited to submit electronic quotes via the DIBBS portal by the deadline of September 3, 2026. No hard copies of the solicitation, specifications, plans, or drawings are available. Inquiries regarding this procurement should be directed to the buyer listed in the solicitation document or through the DIBBS global search using the solicitation number.

General Info

Procurement of one critical aircraft panel delivered to New Cumberland by November 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-393L RFQ

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis

PostedAug 26

Solicitation

Type ChangedAug 27

Solicitation → Combined Synopsis

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 1560017189145 PANEL,STRUCTURAL,AI: Line 0001 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0452 DAYS ADO Approved source is 97499 901-060-850-113. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

FITTING, WINDOW

Solicitation # SPE4A6-26-T-24EQ

This solicitation is for the procurement of 38 window fittings under solicitation number SPE4A6-26-T-24EQ for the Department of Defense ASC Commodities Division. The delivery requirement is 248 days after receipt of order, with the place of performance located at Tinker AFB. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and should use the DIBBS system to submit no-bid responses if they anticipate a delayed quote. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must provide specific representations regarding their business status. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for VSM access and are prohibited from using additive manufacturing processes unless specifically authorized.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

ACTUATOR, ELECTROMEC

Solicitation # SPE7MC-26-T-237Z

This contract is for the procurement of one electromechanical actuator, part number 6612/2-S688-100, manufactured by Curtiss-Wright Flow Control Corporation. The item is identified by NSN 4810-01-585-2146 and is to be delivered to DLA Distribution Jacksonville. The delivery timeline is set for 160 days after order, with a required delivery date of September 7, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Specific requirements include the use of preservation materials to prevent corrosion on bare metals and proper lubrication of moving parts. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and other technical quality requirements specified in the DLA master list. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination.

JACKSONVILLE BLDG

POSTED

about 15 hours ago

DEADLINE

VALVE, CHECK, AIRCRAF

Solicitation # SPE7M4-26-T-321M

This contract is for the procurement of five aircraft check valves, identified by NSN 4820015736314 and Eaton Aerospace part number 731660. The order is managed under solicitation SPE7M4-26-T-321M for the Department of Defense Fluid Handling Division. Delivery is required within 168 days, with a required delivery date of January 5, 2027, and a final ship date of February 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. As a critical application item, the contract specifies that any non-accepted supplies must have government identification removed per requirement RQ011. All technical and quality requirements are governed by the DLA Master List.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-676F

This contract is for the procurement of four special cables, identified by NSN 1560-01-267-9997 and part number 007041, under solicitation SPE4A7-26-T-676F. The agreement mandates strict adherence to DLA technical and quality requirements, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Delivery is required within 176 days, with a required delivery date of March 25, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-12000, while marking must follow MIL-STD-129. Item Unique Identification is not required for this order.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

PATCH, STRUCTURAL COMPO

Solicitation # SPE4A7-26-T-699X

This contract is for the procurement of five structural component patches for aircraft, identified by NSN 1560-01-521-1168 and Boeing part number 74D115270-1005. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility by May 20, 2029. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to several technical and quality requirements, including ISO 9001:2015 standards, CMMC Level 2 self-assessment, and specific DLA packaging and marking guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. While physical identification is required, item unique identification is not necessary per the service customer's request.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

GLAND, LOWER END

Solicitation # SPE4A7-26-T-699L

This contract is a solicitation for the procurement of 15 units of Lower End Glands, identified by NSN 1620-00-083-3504 and part number HP679710 from Tactair Fluid Controls Inc. The agreement is managed by the Department of Defense under solicitation number SPE4A7-26-T-699L, with a required delivery date of March 8, 2027, and a delivery window of 171 days. Shipping is set as FOB Origin, with the final destination being DLA Distribution Jacksonville in Florida. The contract mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment for cybersecurity and specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. This item is designated as a critical application item, requiring precise compliance with all identified technical and quality specifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

PISTON, HYDRAULIC AC

Solicitation # SPE4A6-26-T-22PU

This contract is for the procurement of 15 hydraulic accumulator pistons, identified by NSN 1650-01-533-4180 and part number 294082-4. The items are designated as critical application components and are associated with Sikorsky Aircraft Corporation and Valcor Engineering Corporation. Delivery is required within 97 days, with a need date of December 9, 2026, and a final required delivery date of June 24, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment and specific cybersecurity protections for covered defense information. Quality assurance involves inspection and acceptance at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Item Unique Identification is not required for this specific order.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

HOSE ASSY, AIRCRAFT,

Solicitation # SPE4A7-26-T-649T

Solicitation SPE4A7-26-T-649T is issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 12 aircraft hose assemblies (NSN 1680-01-584-0490). The contract is established on an FOB Origin basis, with a required delivery date of October 6, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, higher-level quality requirements, and the use of measuring and test equipment. Quality assurance is stringent, requiring inspection and acceptance at the origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots. Packaging must comply with MIL-STD-2073-1E and DLA RP001, while marking must follow MIL-STD-129. Additionally, the contractor must comply with hazardous material labeling standards under 29 CFR 1910.1200 and provide corresponding Safety Data Sheets. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and mandatory submission of quotations through the DIBBS portal.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

SUPPORT, STRUCTURAL

Solicitation # SPE4A7-26-T-700D

This solicitation is for the procurement of two structural support units, part number 25-2323, under solicitation number SPE4A7-26-T-700D. The items are to be manufactured using a forging process, which requires specific tooling. This is a total small business set-aside contract with a delivery requirement of 169 days after receipt of order. Performance is located in Tracy, California, and the contract falls under NAICS code 336413. Compliance requirements are extensive, including CMMC Level 2 certification and adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Additional mandates include following the DLA Master List of Technical and Quality Requirements, source approval request documentation, and specific packaging and marking standards. Item Unique Identification is not required for this order.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

NOZZLE, LUBRICATING, AIR

Solicitation # SPE4A5-26-Q-0726

This contract is for the procurement of 39 aircraft gas turbine lubricating nozzles, identified as part number 5203T05G01 from General Electric Company. The order is designated as a critical application item and requires adherence to specific technical and quality requirements, including source approval request documentation and strict physical identification and marking standards. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331 standards. Delivery is required within 97 days after the order is placed, with shipping directed to DLA Distribution Cherry Point in North Carolina. Packaging and palletization must comply with MIL-STD-2073-1E and DLA procurement requirements. The contract specifies a zero percent quantity variance and mandates that all marking follow MIL-STD-129.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-394C

This contract is for the procurement of nine longeron units, identified as Boeing part number 65C18233-510 and NSN 1560-01-677-6525. The order is designated as a critical application item with a required delivery date of June 11, 2028, and a delivery window of 645 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and measuring and test equipment. Packaging must comply with RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 or non-hazardous items following ASTM D3951. Quality sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and item unique identification is not required for this specific order.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-238B

This contract, identified as solicitation SPE7MC-26-T-238B, is for the procurement of two valve bodies with NSN 4810-01-555-7301 and part number 15837DS3-20 from ITT Aerospace Controls LLC. The order is a total small business set-aside under NAICS code 336413, with delivery required within 160 days after order. The items are to be shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance requirements include adherence to DLA packaging standards, specifically ASTM D3951 and MIL-STD-129, as well as the DLA Master List of Technical and Quality Requirements. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and regulations regarding covered defense information. Inspection and acceptance will take place at the destination.

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Frequency and Time Totalizing Meter (NSN 6695016077444)

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Source Inspection Services

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Supply of Raw Materials and Specialty Components for Aerospace Panels

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Critical Application Bulkhead Door Panels

Sheet Metal Work Manufacturing

POSTED

about 15 hours ago

DEADLINE

Aerospace Component Supply: Adapter, Turbine Unit (NSN 4920013107544)

Aircraft Manufacturing

POSTED

about 15 hours ago

DEADLINE

Precision Fastener Component Supply

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 15 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE4A5-26-Q-0713

This contract is for the procurement of 11 retaining rings, identified as part number 5156T34P01 by General Electric Company. The item is designated as a Navy Critical Safety Item and a critical application item, requiring strict adherence to quality and technical standards. Delivery is required within 144 days after the order is placed, with the shipping destination being DLA Distribution Cherry Point in North Carolina. The agreement mandates rigorous quality control, including inspection and acceptance at the origin and sampling methods based on MIL-STD-1916 or ASQ H1331. Compliance with SAE AS9100 higher-level quality requirements is required for manufacturers. Packaging and marking must follow MIL-STD-129 and DLA packaging requirements, and any requests for waivers or deviations must be approved by the DSC contracting officer. Item Unique Identification is not required for this specific order.

Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

RETAINER, PACKING

Solicitation # SPE4A5-26-T-394L

This contract is for the procurement of one packing retainer, identified as NSN 5330014481632 and Boeing part number 90-3328-3016. The item is designated as a critical application item and must be delivered to Tinker AFB within five days of order. The agreement specifies a zero percent quantity variance and requires inspection and acceptance at the destination. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots unless otherwise specified.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-394F

This contract is for the procurement of 30 units of shims, identified by NSN 5365005270413 and part number 507311-5, for the Department of Defense. The delivery is required within 469 days, with a need ship date of December 18, 2027. Shipping is FOB Origin, and the items are to be delivered to Arizona Industries for the Blind in Phoenix, Arizona. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Item Unique Identification is not required for this specific order.

Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A5-26-Q-0724

This solicitation from the Department of Defense ASC Supplier Oper OEM Division is for the procurement of three metal tube assemblies under part number 0001S00000052. The contract requires delivery within 358 days after the order is placed and specifies performance at Robins Air Force Base. Key compliance mandates include adherence to DLA packaging requirements, higher level contract quality standards, and configuration change management protocols. The contract involves strict security and regulatory constraints, including CMMC Level 2 certification and the handling of covered defense information. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data. While physical identification and bare item marking are required, item unique identification is not necessary per the service customer.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

WIRE ROPE ASSEMBLY,

Solicitation # SPE4A5-26-T-394V

This contract is for the procurement of one wire rope assembly, identified as a critical application item under NSN 4010-01-673-8174. The order is issued by the Department of Defense through the ASC Supplier Oper OEM Division for delivery to Assault Craft Unit 4 in Virginia Beach, Virginia. The required delivery date is August 20, 2026, with a delivery timeframe of 20 days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract also specifies the use of fastest traceable shipping means and prohibits the use of parcel post.

Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

INSTALL ASSEMBLY

Solicitation # SPE4A5-26-T-394T

This contract is for the procurement of one Install Assembly, identified by NSN 4920-01-661-7279 and part number 4026AS311-7. The item is classified as a critical application item and must be manufactured according to Technical Data Package Revision A, General 1, based on drawing 30003 4026AS311. Delivery is required within five days after the order, with a required delivery date of August 24, 2026. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA master list requirements, including specific standards for packaging, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The final destination for the shipment is MCAS Futenma in Okinawa, Japan.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE