Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PARTS KIT, AIR DRIER

Active
SPE8E8-26-T-5083Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a Parts Kit for an Air Dryer with the National Stock Number 4440-99-897-3529 and part number KP40562 provided by Pearson Engineering Limited. The delivery is mandated for 14 units, each priced at $14.00, totaling $196.00, with a strict quantity variance of plus or minus zero percent. The items are to be delivered FOB origin within 167 days of the contract award, with both inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 standards unless superseded by any applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and all packaging and labeling must conform to MIL-STD-129. Palletization is required to comply with DLA Packaging Requirements for Procurement. The designated delivery point is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the original required delivery date of December 17, 2026, and a need ship date of February 1, 2027. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E8-26-T-5083, issued under NAICS code 333994 with a response deadline of August 17, 2026, and primary point of contact is Alexis Selby at the Department of Defense.

General Info

Procure 14 air dryer parts kits, $14 each, FOB origin, deliver to New Cumberland, PA by Feb 1, 2027, per MIL-STD-129 and DLA standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333994 - Industrial Process Furnace and Oven ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E8-26-T-5083 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARTS KIT,AIR DRIER
PARTS KIT,AIR DRIER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
PEARSON ENGINEERING LIMITED K0824 P/N KP40562
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758344 0001 EA 14.000
NSN/MATERIAL:4440998973529
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE8E8-26-T-5083
SECTION B
PR: 7017758344 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/17/2026
SPE8E8-26-T-5083 NSN/Part Number: 4440-99-897-3529 Quantity: 14 EA Purchase Request: 7017758344QTY: 14 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333994
New
DIBBS
DESICCANT CONTAINER, DE
Solicitation # SPE8E8-26-T-5062
The contract specifies the procurement of 25 desiccant containers, identified by NSN 4440-12-401-2315 and part number 77550 from DECKMA HAMBURG GMBH, under solicitation SPE8E8-26-T-5062. The unit price is $25.00 per unit, with a total contract value of $625.00, and delivery is required within 167 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and container types, with a packing code of U. All items must be marked per MIL-STD-129 with no special marking required, and palletization must adhere to DLA Packaging Requirements. The shipment must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a need ship date of February 1, 2027, reflecting an original delivery deadline of December 6, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled based on solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification, and compliance with transportation protocols as per DLAD procedural notes C19 and C20 are mandatory. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact information provided for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333994
New
Federal
Oven
Solicitation # W911S226U3944
The U.S. Department of Defense through the W6QM Micc-Ft Drum office is seeking bids for an oven under solicitation number W911S226U3944, with a posted date of August 5, 2026, and a response deadline of August 12, 2026, at 10:00 a.m. This procurement is designated as a Small Business Set Aside under NAICS code 333994, meaning only eligible small businesses may submit proposals. The contract is classified as combined, indicating it may include both a purchase and potential service components. Performance is expected to occur at a location with zip code 47522, though the specific city and state are not provided. All inquiries and communications should be directed to Kyle Brown, the primary point of contact, reachable via email at kyle.a.brown1.civ@army.mil or by phone at 8128544610. The office is located at Fort Drum, New York, with a zipcode of 13602-5220, and this solicitation is accessible through the official SAM.gov platform.
W6QM Micc-Ft Drum

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333994
New
DIBBS
Supply of Hand-Operated Drum WinchThe contract involves the procurement and delivery of one hand-operated drum winch as a commercial off-the-shelf item, with full technical compliance required to meet all mandated specifications. The winning vendor must ensure proper packaging, clear marking, and full traceability of the item throughout the supply chain. Delivery is defined as FOB Origin, meaning the responsibility for transportation and associated risks transfers to the government once the item leaves the supplier’s facility. Government-arranged transportation will be used to move the winch to its final destination, relieving the contractor of logistics obligations beyond the point of origin. The item falls under NAICS code 333994 and is being acquired under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense, with the solicitation posted in August 2026. All requirements must be fulfilled without deviation to satisfy the government’s operational and regulatory standards.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333994
New
International
Two (2) quantities of Ballistic Plasticine Oven
Solicitation # W8486-270930/A
The Department of National Defence is seeking two Ballistic Plasticine Ovens under Supply Arrangement E60PV-19EQUI, which is reserved exclusively for pre-qualified suppliers of laboratory and scientific equipment, parts, accessories, services, and supplies. Bids are only accepted from vendors already holding this supply arrangement, and any proposals from non-qualified suppliers will not be evaluated. The procurement follows a lowest priced responsive proposal strategy under the Canadian Free Trade Agreement and the Canada–Korea Free Trade Agreement, with the solicitation published on CanadaBuys (SAP Ariba) for 40 calendar days and open for bids for a minimum of 15 calendar days. The equipment must be delivered to Edifice 239, local 107, 2459 route de la Bravoure (COTÉ SUD), Québec, QC, G3J 1X5 within eight weeks of contract award. The technical specifications are mandatory and comprehensive: the oven must operate on a 208V to 400V, 3-phase, 50/60 Hz power supply and not exceed dimensions of 1.3m width, 1.2m depth, and 1.8m height. It must maintain a working temperature range from ambient +10°C to at least 300°C, with temperature setpoint adjustments from +20°C to +300°C and resolution of ≤0.1°C below 100°C and ≤0.5°C at or above 100°C. The oven requires two independent Pt100 Class A or better temperature sensors in redundant configuration, an adaptive PID control system with adjustable heating distribution and airflow, and a feature that delays process timing until the setpoint is reached. Internal dimensions must provide a volume between 1000L and 1100L with internal width ≥1000mm, height ≥1100mm, and depth ≥800mm. The chamber must be constructed of corrosion-resistant stainless steel with all internal components made of similar material. It must include forced air circulation via at least two circulating units with adjustable airflow, programmable temperature profiles, over- and under-temperature safety protections, and a minimum chamber load capacity of 290 kg. Only suppliers meeting all technical criteria with the lowest aggregated price will be recommended for award.
Department of National Defence

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333994
New
International
Mechanical and Electromechanical Spare Parts SupplyThe contract involves the supply of mechanical and electromechanical components including pumps, motors, valves, and actuators specifically required for the maintenance and operation of critical medical devices such as dialysis machines, ventilators, and imaging systems. These components are essential to ensure the reliable performance of life-sustaining healthcare equipment within facilities operated by the Southern Regional Health Authority under the Government of Jamaica. The procurement is structured as a subcontract with a NAICS code of 333994, indicating classification under other commercial and service industry machinery manufacturing, and was posted on July 31, 2026. While no specific set-aside provisions or point of contact are listed, the place of performance and organizational details are not defined, suggesting the supplier may be expected to deliver to various healthcare sites across the Southern Region of Jamaica. The contract can be accessed via the Jamaican e-procurement portal for further details and submission requirements.
Southern Regional Health Authority

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 333994
New
Federal
Supply of Edwards iXH100 Vacuum PumpsThe contract solicits the procurement and delivery of Edwards iXH100 brand-name vacuum pumps specifically for integration into semiconductor fabrication systems at the National Institute of Standards and Technology in Boulder, Colorado, with a zip code of 80305. This is a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to respond, and it is classified under NAICS code 333994, which covers other commercial and service industry machinery manufacturing. The opportunity was posted on July 31, 2026, with a firm response deadline of August 11, 2026, at 3:00 PM, indicating a short procurement window. The equipment must meet exact technical specifications to ensure compatibility with NIST’s advanced semiconductor research infrastructure, and delivery is expected to align with the operational timelines of the fabrication systems. The contracting activity falls under the Department of Commerce, with NIST as the performing agency, and while no point of contact details are provided, all submissions must comply with the terms and conditions of the subcontract as outlined in the SAM.gov portal. The requirement for a branded product underscores the necessity for performance consistency and reliability in high-precision scientific applications.
Department Of Commerce Nist

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333994
New
Federal
Supply of Ebara EV-A06-2 Vacuum PumpsThe contract requires the procurement and delivery of two Ebara EV-A06-2 high-capacity vacuum pumps, each with a minimum flow rate of 300 cubic meters per hour, along with their integrated controller and isolation valves, for use in mission-critical microfabrication processes. These systems must meet strict performance standards to ensure reliability and precision in sensitive manufacturing environments. The requirement is issued as a subcontract under a Small Business Set Aside classification, meaning only qualified small businesses are eligible to respond. The North American Industry Classification System code is 333994, categorizing the work within other commercial and service industry machinery manufacturing. The solicitation was posted on July 31, 2026, with a response deadline of August 11, 2026, at 3:00 PM. Performance of the contract is to take place in Boulder, Colorado, at the 80305 ZIP code location, with the U.S. Department of Commerce’s National Institute of Standards and Technology serving as the issuing agency. The contract supports advanced technology development under NIST’s mission and demands full compliance with technical specifications for vacuum performance, component integration, and system readiness. Delivery timelines, installation protocols, and technical validation procedures are implied critical factors for successful contract award and execution.
Department Of Commerce Nist

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333994
New
Federal
Supply of Ebara EV-A03-2 Vacuum PumpsThe contract calls for the procurement and delivery of six Ebara EV-A03-2 oil-sealed rotary vane vacuum pumps, each配备 controller and isolation valve, for integration into semiconductor fabrication tools at the NIST Boulder facility. The equipment must be delivered in full compliance with technical specifications required for high-precision semiconductor manufacturing environments, ensuring compatibility and reliable performance under demanding operational conditions. The place of performance is specifically designated as Boulder, Colorado, with a zip code of 80305, and the supplies are intended for direct use within NIST’s Advanced Manufacturing and Materials Research infrastructure. This is a small business set-aside subcontract under NAICS code 333994, indicating it is reserved exclusively for small business concerns, and the solicitation is open until August 11, 2026, at 3:00 PM Eastern Time. Offerors must prepare responses that demonstrate technical capability, compliance with performance standards, and readiness to meet the integration timeline required by NIST’s research tools. The contract falls under the U.S. Department of Commerce, National Institute of Standards and Technology, and while no point of contact is listed, submissions must be routed through the official SAM.gov portal for formal consideration.
Department Of Commerce Nist

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333994
New
Federal
Supply of Ebara EV-A03-1 Vacuum PumpsThe contract calls for the procurement and delivery of nine Ebara EV-A03-1 oil-sealed rotary vane vacuum pumps, each equipped with a controller and an isolation valve, specifically for use in cleanroom microfabrication systems. These units are critical to maintaining precise vacuum conditions required for sensitive manufacturing processes, ensuring system reliability and performance in a controlled environment. The equipment must meet technical specifications for compatibility, durability, and cleanliness standards consistent with cleanroom operations. This is a small business set-aside subcontract under NAICS code 333994, issued by the Department of Commerce NIST with a performance location in Boulder, Colorado. The solicitation was posted on July 31, 2026, and responses are due by August 11, 2026. The contract is structured to prioritize small business participation, and vendors must be prepared to deliver fully assembled and tested systems compliant with the required functional and environmental criteria for integration into existing microfabrication infrastructure.
Department Of Commerce Nist

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333994
New
Federal
Oil-Free Vacuum Pump SupplyThe contract involves the supply and delivery of a single oil-free Edwards nXDS10i vacuum pump designed specifically for compatibility with a plasma cleaner system, ensuring contamination-free operation critical for sensitive laboratory processes. The equipment must meet strict performance standards to maintain the integrity of vacuum conditions without introducing hydrocarbons or other pollutants typically associated with oil-lubricated systems. The solicitation is issued under a subcontract structure with a NAICS code of 333994, indicating classification within other commercial and industrial machinery and equipment manufacturing. It is posted by the Department of Commerce, specifically under NIST, with the place of performance located in Boulder, Colorado, 80305. Responses must be submitted by August 10, 2026, at 3:00 PM, following the posting date of July 31, 2026. No set-aside designation is specified, and contact details are not provided in the available data.
Department Of Commerce Nist

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 333994
New
DIBBS
Supply of Industrial Equipment or Components (Single-Unit Delivery)The contract involves the delivery of unspecified industrial supplies or components, likely related to engines or engine systems, in small quantities to a Defense Logistics Agency warehouse located in Tracy, California, with a ZIP code of 95304-5000. The procurement is classified as a subcontract under NAICS code 333994, which corresponds to other engine equipment manufacturing, indicating the items may be specialized mechanical or automotive parts. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, providing a twelve-day window for potential vendors to submit proposals. The contracting entity is listed as Land Supplier Ops Engines under the Department of Defense, suggesting this is part of a broader military supply chain effort. There is no set-aside designation specified, and the contract does not indicate whether it is reserved for small businesses or other categories. No point of contact information or specific delivery instructions beyond the warehouse location are provided, and the exact nature of the components remains undefined in the published details.
LAND SUPPLIER OPNS ENGINES

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 333994
New
Federal
Foam Proportioning System InstallationThe contract involves the installation and integration of foam proportioning equipment into an existing fire suppression system, with strict requirements to ensure compliance with NFPA standards and seamless compatibility with established pump systems. The work must be executed to meet technical specifications that guarantee reliable performance under emergency conditions, emphasizing system accuracy, durability, and operational readiness. All components and installation practices must align with industry best practices for fire protection systems used in high-risk environments. This subcontract is issued by the USDA Forest Service under the NAICS code 333994 and was posted on July 30, 2026, with proposals due by August 18, 2026. While no specific location for performance is provided, the project is tied to federal land management operations requiring robust fire suppression capabilities. The procurement does not specify a set-aside designation, indicating it is open to general industry participation. The successful contractor will be responsible for end-to-end delivery, including equipment sourcing, system integration, testing, and validation to ensure full regulatory and functional compliance without disruption to existing infrastructure.
USDA Forest Service

POSTED

6 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details