Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PARTS KIT, COMPRESSO

Active
SPE7M1-26-T-285MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7M1-26-T-285M, is for the procurement of nine compressor parts kits under NSN 4320-00-471-3618. The order is issued by the Department of Defense Maritime Supply Chain and specifies a delivery timeframe of 66 days after order. Delivery is set as FOB Origin, with both the inspection and acceptance points located at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and requires compliance with the DLA Master List of Technical and Quality Requirements. All shipments are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of October 10, 2026.

General Info

DoD contract SPE7M1-26-T-285M for nine compressor parts kits due October 10, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-285M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
KELSEY SCHLAGENHAFT
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARTS KIT,COMPRESSO
PARTS,KIT,COMPRESSOR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
STANLEY M. PROCTOR COMPANY, LLC 7A368 P/N 27423
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016686215 0001 EA 9.000
NSN/MATERIAL:4320004713618
DELIVERY (IN DAYS):0066
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M1-26-T-285M
SECTION B
PR: 7016686215 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/03/2026 Original Required Delivery Date:10/10/2026
SPE7M1-26-T-285M NSN/Part Number: 4320-00-471-3618 Quantity: 9 EA Purchase Request: 7016686215QTY: 9 Delivery: 66 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT
Solicitation # SPE7M0-26-T-045D
This contract is for the procurement of three spring-loaded shaft seal assemblies, identified by NSN 4320014392191 and Detroit Diesel Corporation part number 8690740143. The order is split across three separate purchase requests, each for one unit, with a required delivery date of August 14, 2026. Delivery is specified as FOB Origin with a delivery window of five days. The items are to be shipped to the SWRMC MAC-MO facility in National City, California, using the fastest traceable means, specifically excluding parcel post. Compliance with DLA packaging requirements, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking is mandatory. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
MOTOR, HYDRAULIC
Solicitation # SPE7M0-26-T-044L
This contract is a solicitation for the procurement of one hydraulic motor, identified by NSN 4320-01-456-9389. Approved manufacturers and part numbers include Allied Systems Company P/N 236421 and Parker Hannifin Corporation P/N 313-9710-234 or WM51A-878-BE-OF20-7. The item is designated as a critical application item and must be delivered FOB Origin within five days. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Delivery is directed to the SWRMC MAC-MO facility in National City, California, and must be shipped via the fastest traceable means, specifically excluding parcel post.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-T-284V
This contract is for the procurement of one spring loaded shaft seal assembly, identified by NSN 4320014786014 and associated with Gardner Denver Nash LLC part numbers 15-3819 and BPK-2284. The order is issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-284V, with a required delivery date of February 17, 2027, and a delivery timeframe of 168 days. The agreement mandates strict adherence to DLA packaging and marking requirements per MIL-STD-129 and MIL-STD-2073-1E, with delivery and acceptance occurring at the destination in New Cumberland, Pennsylvania. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. All technical and quality requirements are governed by the DLA Master List.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PARTS KIT, HYDRAULIC PU
Solicitation # SPE7M1-26-T-284Q
Solicitation SPE7M1-26-T-284Q is a total small business set-aside for the procurement of 23 hydraulic pump parts kits, identified by NSN 4320-01-073-6223 and part number 9776238-10. The contract is managed by the Department of Defense Maritime Supply Chain and requires delivery to Tinker AFB, Oklahoma, with a need ship date of February 12, 2027, and an original required delivery date of April 14, 2027. The delivery timeframe is specified as 168 days after receipt of order, with FOB and inspection/acceptance points set at the origin. Technical compliance is governed by U.S. Air Force drawing 9776238 and TDP Rev B Gen 2. Strict environmental and safety mandates are in place, including the prohibition of class I ozone-depleting chemicals and hexavalent chromium. Packaging must adhere to MIL-STD-2073-1E Appendix D for kits, and marking must comply with MIL-STD-129. The contract incorporates comprehensive cybersecurity and national security requirements, including DFARS 252.204-7012 for safeguarding covered defense information and prohibitions on telecommunications equipment from specific Chinese entities. All invoicing must be processed electronically through the Wide Area WorkFlow system.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
Hand Fuel Pump SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the procurement and delivery of hand fuel pumps. The equipment must adhere to the specific requirements of NSN 2910014962523 and the associated part number specifications, with fulfillment occurring under designated delivery orders. The contract is categorized under NAICS code 333996 and was posted on August 15, 2026. It serves as a formal agreement for the supply of specialized fueling hardware to meet agency operational needs.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 333996
New
Federal
43--WY SE KO Replace Sump Eductor
Solicitation # 140R6026Q0072
The U.S. Department of the Interior, through its Great Plains Regional Office, is conducting market research to identify capable vendors for the procurement of two water jet educators to be installed in the emergency sump systems at the Seminoe and Kortes power plants in Wyoming. These units are non-powered, self-priming devices designed for reliable dewatering during emergencies, requiring no moving parts and capable of handling solids up to one inch in diameter, with a specified capacity ratio of 16.00, motive water consumption of approximately 162 gpm at 85 psig, and solids throughput of 340 ft³/hr at 5 psig and 270 ft³/hr at 10 psig. Equipment must feature ANSI Class 150# flanged connections and replaceable bronze internals, with an overall length of 23-5/8 inches. The procurement is anticipated to follow FAR Part 12 as a Firm-Fixed-Price contract for commercial items, with deliveries directed to the Bureau of Reclamation Warehouse in Mills, Wyoming, and eventual installation at the two plant sites. The solicitation number is 140R6026Q0072, issued on May 19, 2026, with responses due by June 2, 2026, at 3:00 PM MST via email to designated point of contact addresses. No formal proposals, pricing, or contractual terms are currently requested, as this is strictly a sources sought notice for market research purposes. The NAICS code 333996 applies, and the government is particularly interested in responses from small businesses including 8(a), women-owned, HUBZone, service-disabled veteran-owned, and Indian Small Business Economic Enterprises, with a small business size standard of 900 employees. No packaging, marking, or inspection specifications are detailed, and no award basis, evaluation factors, contract value, or delivery schedule are defined at this stage. Contract administration data identifies Sydney Oakes as the Contract Specialist and Michael Hirsch as the Contracting Officer, with no COR or COTR assigned. References to FAR clauses 52.212-3 and 52.222-25 are noted as administrative reminders regarding SAM registration and affirmative action compliance but are not active obligations in this pre-solicitation phase. A diagram of the required water jet educators is attached.
Great Plains Regional Office

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 333996
New
International
MOTOR, HYDRAULIC
Solicitation # W8482-264900/A
The Department of National Defence is seeking to procure four hydraulic motors with part number A6VM107HD1/60W0308-PPB020B, manufactured by Bosch Rexroth AG and identified by NCAGE code D8782, for delivery to CFB Halifax, and three identical units for delivery to CFB Esquimalt, with a total requirement of seven units. The solicitation, identified as W8482-264900/A, is posted under the Government of Canada’s procurement system with a response deadline of August 7, 2026. Bidders must comply with mandatory technical requirements, including accurate specification of the part number and NCAGE code, and may propose equivalent or substitute products only if they provide complete technical documentation, compliance statements, and supporting literature demonstrating equivalency in form, fit, function, quality, and performance. Canada reserves the right to request physical samples for verification. The evaluation will be based on the lowest evaluated price among compliant offers, and multiple contracts may be awarded. All items must be packaged and marked in accordance with Canadian Forces Packaging Specification D-LM-008-036/SF-000 or applicable NATO or U.S. military standards, with manufacturer names and part numbers clearly stamped or etched on each unit, and barcodes positioned per Canadian Forces specifications. Safety Data Sheets must be bilingual and include the NATO Stock Number, and all hazardous goods must comply with the Transportation of Dangerous Goods Act and Hazardous Products Act. The Contractor is liable for improper packaging, labeling, or shipment of dangerous goods. Delivery must occur by the dates specified in the Statement of Requirement, with invoicing tied strictly to completed deliveries and supported by packing slips. Payment terms require undisputed invoices to be paid within 30 days, with 15% withholding for non-resident contractors unless a valid CRA waiver is provided. The Contractor must maintain detailed accounting records for seven years after final payment and make them available for audit at any time during and after contract performance. Quality control systems are expected to align with ISO 9001:2015, and all inspection and test records must be retained for three years. The Contractor must comply with Canadian procurement laws, the Code of Conduct for Procurement, and international sanctions regulations, and must immediately notify Canada if sanctions prevent contract performance. No security clearance is required, but the Department retains ownership of all specifications and may inspect deliverables at destination. Sub
Department of National Defence

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
SLED
Graco Quantum Pump TE120-0001
Solicitation # 26-P-00512
Solicitation 26-P-00512 is issued by the Florida Water Production agency for the procurement of a Graco Quantum Pump TE120-0001. This aluminum housing pump is designated for use in the lime building. The procurement is managed by the City of Tampa, with primary contact Debbie Lambert and secondary contact Tonya Parker-Rimes. All quotes must include shipping, handling, and freight charges, as items are to be shipped Freight On Board Destination. The response deadline for this solicitation is August 20, 2026.
Water Production

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333996
New
DIBBS
Compressor Parts Kit Assembly & IntegrationThe Maritime Supply Chain under the Department of Defense is seeking a subcontractor for the assembly and integration of compressor components into complete kits. A critical technical requirement of this project involves the substitution of part number SKI 4073S with part number SKI 4025S, identified by CAGE code 64678. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 333996. The work will be performed in Texarkana, Texas, with a response deadline set for August 24, 2026.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 333996
New
DIBBS
RESERVOIR, HYDRAULIC
Solicitation # SPE7M1-26-T-245U
Solicitation SPE7M1-26-T-245U is a Department of Defense procurement issued by the Maritime Supply Chain for four hydraulic reservoirs, identified by NSN 4320014860184. This is a total small business set-aside under NAICS code 333996. The requirement specifies a need ship date of January 19, 2027, with an original required delivery date of January 31, 2027. Delivery is FOB Origin, with the final destination and inspection point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and barcoding, and RP001 for palletization. Special environmental and safety requirements are in place, specifically the prohibition of intentionally added mercury in accordance with NAVSEA 5100-003D and compliance with OSHA hazard communication standards for labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and submission of quotes through the DLA Internet Bid Board System (DIBBS). The procurement is governed by a comprehensive set of FAR and DFARS clauses, including those for simplified acquisitions and NIST SP 800-171 cybersecurity assessment requirements.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 333996
New
DIBBS
PUMP, RECIPROCATING
Solicitation # SPE7M1-26-Q-1367
This contract, identified as SPE7M1-26-Q-1367, is a firm fixed price procurement for six reciprocating pumps, part number 4320-01-272-3909. The delivery is required within 30 days after receipt of the order, with a need date of October 8, 2026. Inspection and acceptance will take place at the destination, and the items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific functional components authorized by NAVSEA. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129, and Federal Specification MIL-P-16789.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
ROTOR, PUMP
Solicitation # SPE7M1-26-T-244L
Solicitation SPE7M1-26-T-244L is a procurement request by the DLA Land and Maritime Maritime Supply Chain for 13 units of a pump rotor, identified by NSN 4320012925726 and Triumph Actuation Systems LLC part number 4110834-1. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The need ship date is April 20, 2027, with an original required delivery date of September 18, 2027. Terms are FOB destination, and the government is responsible for inspection and acceptance at the destination point. The contractor must adhere to strict technical and quality standards, with the DLA Master List of Technical and Quality Requirements taking precedence over other specifications. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Key restrictions include a total prohibition on Class I ozone-depleting chemicals and the requirement to use U.S.-flag vessels for ocean shipments unless a waiver is granted. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various DFARS and FAR clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered defense telecommunications equipment.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in about 23 hours
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-285K
This contract, identified as solicitation SPE7M1-26-T-285K, is for the procurement of six circuit card assemblies under NSN 5998-01-712-8769 for the Department of Defense Maritime Supply Chain. The delivery requirement is set for 159 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. The agreement is subject to stringent technical and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and inspection standards. Due to the nature of the technical data, the contract is governed by ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle the controlled data.
Bare Printed Circuit Board Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M1-26-T-285Q
This contract is for the procurement of 21 pressure switches under solicitation SPE7M1-26-T-285Q for the Department of Defense Maritime Supply Chain. The items are identified by NSN 5930-01-040-3448 and are designated as critical application items. Delivery is required within 151 days after the order, with a need date of August 5, 2025, and a final required delivery date of November 6, 2025. The shipment is destined for DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and technical standards, including the prohibition of intentionally added mercury except in specific approved functional cases. Because existing data packages are insufficient to fully define performance requirements, potential sources must develop a comprehensive data package including a proposed test plan based on industry or government standards. Failure to provide this documentation will result in a technically nonresponsive offer. The contract is a total small business set-aside under NAICS code 332919.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-Q-1394
This solicitation is for the procurement of 82 fluid filter elements under NSN 4330-01-114-0918, with a delivery requirement of 160 days after order. The contract specifies that the items must align with Boeing drawing 145DS523 and part number 145DS523-2, with approved sources including Falls Filtration, Purolator Facet, and The Boeing Company. Compliance requirements include CMMC Level 2 certification for third-party assessments and adherence to DLA packaging and quality standards. Contractors must maintain a calibration system meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 standards and strictly avoid the use of Class I ozone-depleting chemicals and intentional mercury additions. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring approved JCP certification and specific training for access to technical data.

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M1-26-T-285U
This contract is for the procurement of 18 circuit card assemblies, part number 62413-140, provided by Dynalec Corporation. The agreement specifies a delivery timeframe of 167 days after order, with a required delivery date of July 12, 2027. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and specific prohibitions against the intentional addition of mercury. Because the assemblies are electrostatic sensitive devices, the supplier must utilize DOD qualified ESD and EMI protective packaging materials in accordance with MIL-PRF-81705. Additionally, the contractor is advised to utilize MIL-PRF-31032 for printed circuit boards where older standards are cited.
Bare Printed Circuit Board Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7M1-26-T-285G
This contract is a solicitation for the procurement of 20 fluid valve stems, identified by NSN 4820012009429 and part number 1105 from Floworks USA LP. The requirement is designated as a critical application item and is set aside for Women-Owned Small Businesses. Delivery is required within 108 days, with a requested delivery date of October 9, 2026, and shipping is designated as FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. A significant environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. Inspection and acceptance will take place at the destination point.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M1-26-T-285R
This contract, identified as SPE7M1-26-T-285R, is a solicitation for the procurement of 10 units of a circuit card assembly, part number 81655-001, with NSN 5998015423456. The delivery is required within 106 days after the order, with a target ship date of December 13, 2026. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and a prohibition on the intentional use of mercury. Extensive packaging requirements are specified to prevent electrostatic discharge and electromagnetic interference, requiring the use of DOD qualified materials per MIL-PRF-81705 and marking in accordance with MIL-STD-129. The supplier is responsible for ensuring all protective materials are sourced from qualified manufacturers on the QPL-81705 list to prevent damage to the components.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE7M1-26-T-285J
This contract, identified as SPE7M1-26-T-285J, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of four printed circuit boards, part number 60173-600-01, manufactured by Dynalec Corporation. The order specifies a delivery timeframe of 167 days, with a required delivery date of July 12, 2027, and a need ship date of February 12, 2027. The items are to be delivered FOB Origin and inspected at the destination, with the final delivery point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Because the items are electrostatic discharge sensitive, the supplier must use DOD qualified ESD and EMI protective packaging materials in accordance with MIL-PRF-81705 to prevent damage to leads and terminals. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
Bare Printed Circuit Board Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, HOLD, BOOM HOI
Solicitation # SPE7M1-26-T-285F
This contract is a solicitation for the procurement of boom hoist hold valves, specifically part number CBEA-LIN from Sun Hydraulics Corporation, identified by NSN 4820015211650. The requirement consists of two separate purchase requests, each for one unit, with a delivery timeframe of five days. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and palletization requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. Shipping must be conducted via the fastest traceable means to the designated SWRMC MAC-MO facilities in San Diego and National City, California, with an original required delivery date of August 14, 2026.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M1-26-U-5277
This contract, identified as SPE7M1-26-U-5277, is a solicitation for the procurement of 128 nonmetallic hose assemblies under NSN 4720-01-633-5171. The requirement is issued by the Department of Defense Maritime Supply Chain and is designated as a total small business set-aside. The delivery timeframe is set for 123 days after receipt of order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. The contract specifies that government identification must be removed from any non-accepted supplies and references specific part numbers from Grove U.S. LLC and Oshkosh Defense LLC.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, GLOBE VAL
Solicitation # SPE7M1-26-T-285E
This contract, identified as SPE7M1-26-T-285E, is a solicitation for the procurement of two globe valve parts kits, identified by NSN 4820015636795 and part number 1455912-1KD from Curtiss-Wright Flow Control Corporation. The requirement is a total small business set-aside under NAICS code 332911, with a required delivery date of August 14, 2026, and a delivery timeframe of five days after order. The items are to be delivered FOB destination to the USS Abraham Lincoln CVN 72. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Key compliance standards include the CMMC Level 2 self-assessment for cybersecurity and specific restrictions against the intentional addition of mercury or mercury-containing compounds. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
PANEL, POWER DISTRIB
Solicitation # SPE7M1-26-T-285V
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of one power distribution panel, identified by NSN 6110-01-737-1205. The contract requires delivery within 20 days after receipt of order. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026, under NAICS code 335312. Crucially, this item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access the necessary technical data, contractors must be approved by the DLA controlling authority, hold a valid US/Canada Joint Certification Program certification, and complete specific export-control training and questionnaires.
Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, TE
Solicitation # SPE7M1-26-Q-1384
This contract is for the procurement of 61 units of temperature regulating valves, identified by NSN 4820-01-547-5544 and part number 98705350009 from Fairbanks Morse, LLC. The delivery is required within 349 days after the order, with the destination and acceptance point located at DLA Distribution San Diego. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the shipment must be delivered to the specified freight address in San Diego.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details