This Solicitation opportunity from Department Of Defense was posted on August 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PARTS KIT, CONTROL SURF
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract solicitation SPE4A5-26-Q-0574 seeks the procurement of 18 units of a Parts Kit, Control Surface, Aircraft, identified by NSN 1560-01-560-9901 and supplier part number CA64527-001 from ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is required within 552 days ADO with a specified need ship date of November 25, 2028, under FOB Origin terms, and inspection and acceptance will occur at the destination. The kit must be packaged and preserved per MIL-STD-2073-1E and Appendix D of MIL-STD-2073-1, ensuring all components of the same NSN are grouped and placed in a single box with adequate cushioning to prevent damage, and each box must contain a detailed contents list with part numbers, NSNs, and quantities. Marking must strictly comply with MIL-STD-129, including barcoding, with no special marking required. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise specified, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The contract mandates stringent cybersecurity compliance under CMMC Level 2 Self-Assessment with adherence to DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, and DFARS 252.204-7019 for NIST SP 800-171 assessment requirements, where contractors must hold a current assessment not older than three years. The item is designated as a Critical Application Item and requires compliance with DFARS 252.246-7007 for detecting and avoiding counterfeit electronic parts and DFARS 252.246-7008 for sourcing electronic components. The Buy American Act and Trade Agreements obligations apply, requiring
General Info
NAICS
Place of Performance
VA, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N CA64527-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-Q-0574
SECTION B
SUPPLY/SERVICE: 1560-01-560-9901 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 1560-01-560-9901 18.000 EA $ _______________ $ ______________ PARTS KIT,CONTROL SURFACE,AIRCRAFT
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 552 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00 WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION <(>&<)> PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW NSN PACKAGING REQUIREMENTS, THEN MARKED IAW MIL-STD-129. PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A CONTENTS LIST CONSISTING OF COMPONENT PART NSNS, PART NUMBER AND QUANTITY PER KIT. BOX SHALL BE MARKED AND BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL 7537 WARDLEIGH RD HILL AFB UT 84056-5734 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL DDHU CML +1 (555) 000-0000 7537 WARDLEIGH RD BLDG 849W HILL AFB UT 84056-5734 US
SPE4A5-26-Q-0574
SECTION B
SUPPLY/SERVICE: 1560-01-560-9901 CONT'D
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016227462 0001 N/A N/A N/A 11/25/2028
SPE4A5-26-Q-0574 NSN/Part Number: 1560-01-560-9901 Quantity: 18 EA Purchase Request: 7016227462QTY: 18 Delivery: 552 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS