PARTS KIT, DIESEL EN

PARTS KIT,DIESEL EN
SERVICE KIT, DIESEL ENGINE, GENERATOR.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RT001: MEASURING AND TEST EQUIPMENT
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. 3KW MIL-STD MEP 016E THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
KIT QUALITY PROVISION
.
1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED
TO THE GOVERNMENT AS A KIT.
2. THE CONTRACTOR SHALL COMPLY WITH ALL
APPLICABLE QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS FOR THE KIT COMPONENTS BEING
SUPPLIED.
3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR
SPE7L1-26-T-165S
SECTION B
OBTAINING, HANDLING AND SUPPLYING ORIGINAL
EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS
INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH
ITS VENDORS.
4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION
SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL
PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH
REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT
DAMAGED.
5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR
PROCESS THAT WILL ENSURE TRACEABILITY OF ALL
PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE
MANUFACTURER.
6. THE CONTRACTOR'S INSPECTION SYSTEM AND
PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL
BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE
REQUEST OF THE CONTRACTING OFFICER.
7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS
THAT ARE KNOWN TO BE ACCEPTABLE TO THE
GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED
SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS
REFLECTED IN THE GOVERNMENT'S CONTRACT
TECHNICAL DATA FILE (CTDF).
8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE
CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY
ONLY NEW AND UNUSED PARTS THAT ARE NOT
GOVERNMENT SURPLUS PARTS.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
A. Data required by this document will be included in the price of the procured item(s).
B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).
C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.
D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). NSN/Part Number: 2815-01-532-9561 Quantity: 1 KT Purchase Request: 7015733382QTY: 1 Delivery: 5 days ADO