Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

PARTS KIT, REGULATOR

Awarded

SPE8E626F1437Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded contract SPE8E626F1437 to Equipment Solutions & Personnel, LLC on September 2, 2026, as a delivery order under the primary contract SPE8E525D0003. This specific award is valued at 167,960.00 dollars for the procurement of 4,000 units of regulator parts kits, identified by NSN 4240-01-542-8151. The delivery for these items is required by November 12, 2026. The order is managed by DLA Troop Support and includes strict requirements for packaging, marking, and quality assurance, with inspection and acceptance occurring at the origin. Payment is processed through the Wide Area Workflow system. This delivery order falls under a larger commercial items framework that includes critical safety item specifications and is subject to standard FAR and DFARS clauses and DPAS rating guidelines.

General Info

DLA awarded Equipment Solutions & Personnel $167,960 for 4,000 regulator parts kits.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$167,960

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

EQUIPMENT SOLUTIONS & PERSONNEL, LL

Award Issued Date

09/02/2026, 12:00:00 AM UTC

Documents

2

SPE86-26-F-1437 Delivery Order for Parts Kit Regulator

task-order-award

High

SPE8E5-25-Q-0040 Award/Contract for Parts Kit, Regulator

contract-document

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 2

Award Notice

AwardedSep 2

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE8E626F1437 posted on DIBBS. Awardee: EQUIPMENT SOLUTIONS & PERSONNEL, LL (CAGE 46LW2) Total Contract Price: $167,960.00 Award Date: 09-02-2026 Delivery order under: SPE8E525D0003 Line items: - PARTS KIT, REGULATOR (NSN/Part 4240015428151, PR 7016936579)

Similar Contracts

Same NAICS industry code

Solicitation # N0010426QFE70

This contract pertains to the procurement of a 1/4 inch globe needle valve designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The valve must fully conform to Swagelok Process Drawing PS-1020, model SS-6NKRSW4P-E4-1103A, with strict material specifications requiring ASTM-A276 or ASTM-A479 UNS S31600 for key components such as the bonnet, union nut, stem assembly, and body. Comprehensive certification and traceability are mandatory, with each assembly requiring a nonferrous metal tag bearing CID number 887075356 and permanent traceability markings linked to chemical and mechanical test reports that must accompany every shipment. All material must be traceable from raw stock through fabrication to final assembly without commingling, and any processing altering properties necessitates re-certification with a new traceability identifier. Testing and quality assurance requirements are rigorous and non-negotiable. Pressure tests must adhere to precise tolerances based on test pressure levels, with durations tightly controlled. Welding and brazing must follow S9074-AQ-GIB-010/248 or 0900-LP-001-7000 standards, requiring prior submission and approval of procedures and qualification data, including WPS and PQR documentation. All welds, especially on titanium or with hardfacing, demand strict oversight, and filler metals require certification with lot numbers and compliance statements. Quality systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or the alternate MIL-I-45208 and MIL-STD-45662, subject to government audit at source. Documentation must be submitted electronically via WAWF to the Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance authority held by N39040, and no material may ship without prior written acceptance. Electronic signatures are accepted as legally equivalent to handwritten, provided they are uniquely controlled and auditable. Final delivery must occur within 365 days of contract effective date, with zero-defect lot acceptance required, and all certifications must be unqualified, positive, and fully traceable to individual items. The contract

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

STRAINER,SEDIMENT

Solicitation # N0010426QEG40

Solicitation N00104-26-Q-EG40, issued by NAVSUP Weapon Systems Support Mech, is a request for quotation for the procurement of sediment strainers (NSN 4730-01-527-9800). The contract is a total small business set-aside under NAICS code 332919. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Following Amendment 0001, the closing date for submissions is November 16, 2026. Pricing must remain valid for 60 days after the closing date unless otherwise specified. The contractor is required to adhere to higher-level quality standard MIL-I-45208 and must review the mandatory Individual Repair Part Ordering Data (IRPOD) via the BPMI site. Key deliverables include the supply of the sediment strainers with a delivery period of 180 days, shipped FOB Destination. Technical compliance is governed by a strict order of precedence, prioritizing contract amendments and the schedule of supplies over the IRPOD and referenced drawings. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for Level A or B packing based on the shipping route. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports. The contractor must maintain an acceptable inspection system, with both inspection and acceptance occurring at the contractor's plant. Additionally, the contract mandates compliance with various federal and defense regulations, including Cybersecurity Maturity Model Certification (CMMC) requirements, Buy American preferences, and strict prohibitions on the use of mercury in hardware.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 1 month

59--SWITCH,THERMOSTATIC

Solicitation # SPE7M1-27-U-0844

The DLA Weapons Support Maritime Supply Chain is soliciting quotes for the procurement of thermostatic switches, NSN 5930012052935, designated as critical application items. This solicitation, number SPE7M1-27-U-0844, may result in a unilateral Simplified Indefinite-Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual requirement is five units, with a guaranteed minimum quantity of one. Approved sources include Detroit Switch Inc and 811-045-003. Quotes must be submitted electronically by October 30, 2026, and will be evaluated based on price and the responsibility of the offeror. Deliveries are designated as FOB Destination Other, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001. The contract mandates compliance with the Buy American Act, the Berry Amendment, and NAVSEA 5100-003D regarding mercury restrictions. Additionally, hazardous materials must be labeled per the Hazard Communication Standard. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports. Key regulatory requirements include NIST SP 800-171 assessment and safeguarding of covered defense information per DFARS 252.204-7012.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

BALL KIT, CERAMIC

Solicitation # N0010426QFD00

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 1 month

RETAINER,SEAT,VALVE

Solicitation # N0010426QFF38

The contract pertains to the procurement of a Retainer, Seat, Valve designated as SPECIAL EMPHASIS Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must fully comply with Naval Ship Systems Command Drawing 801-6404739 and adhere to stringent quality and traceability controls. Materials are required to be QQ-N-286, annealed and age-hardened, with mandatory quantitative chemical and mechanical analysis, ultrasonic inspection of starting material, and slow strain rate tensile testing performed exclusively by approved laboratories. All traceability must be maintained from raw material through fabrication to final component via unique heat-lot markings, with electronic and physical records preserving integrity through every process step. Certification documentation must be 100% complete, legible, and signed, with electronic signatures accepted under strict identity verification protocols. No weld repair is permitted on QQ-N-286 material, internal threads must be cut not cold-formed, and mercury is strictly prohibited from contacting any supplied hardware. All deliveries must be preceded by certification data submission via WAWF to Portsmouth Naval Shipyard (N50286) for prior review and acceptance, with notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may ship without formal acceptance. The contractor must maintain and document a quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO-17025, or alternatively MIL-I-45208 with MIL-STD-45662, subject to government audit. Thread inspections must follow FED-STD-H28 System 21 or 22 as applicable, and all packaging, preservation, and marking must conform to MIL-STD-2073. Subcontractors must be evaluated, monitored, and their quality controls aligned with prime contractor obligations. Any deviations or waivers require explicit Contracting Officer approval and must be classified as Critical, Major, or Minor. Final acceptance relies on zero-defect lot inspection per ANSI/ASQ Z1.4, with 100% verification of all certifications, traceability markings, and nondestructive test results. The contract is a total small business set-aside, rated under DPAS for national defense priority, and includes mandatory compliance with Buy American Act, Security Prohibitions, and other federal regulations. Delivery must be completed

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

PARTS KIT,BALL VALV

Solicitation # N0010426QFE42

This contract is a firm fixed-price repair purchase order for a ball valve parts kit designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic loss of life, vessel, or mission capability. The contractor must refurbish the valve components to “like new” or “A” condition, including teardown, inspection, and repair, and must provide a beyond-repair price alongside the repair quote. All work must adhere strictly to Newport News Shipbuilding drawings 255583 and 255584, with precise material specifications for the ball (SAE AMS-6931 or ASTM-B367 Grade C-5) and seats (MD71-GG Mearthane, manufactured by Mearthane Products Inc.), including stringent mechanical and chemical property requirements. Traceability is mandatory from raw material through final assembly, requiring permanent marking on components and full certification of chemical composition, mechanical properties, and non-destructive testing, including ultrasonic inspection and surface waviness verification. All certifications must comply with ISO-9001 and either ISO-10012/ISO/IEC 17025 or MIL-I-45208/MIL-STD-45662, with the contractor required to maintain documented quality procedures subject to government audit. Delivery is strictly controlled under a compressed timeline, with final material due no later than 100 days after contract award, and certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (DODAAC N50286) for approval prior to any shipment. The government will inspect and accept material at source, and no shipment is permitted without prior written acceptance. The contract mandates 100% inspection of certification documents and traceability markings, with zero-defect acceptance criteria for sampling and strict adherence to MIL-STD-792 for marking, with exceptions for Teflon-coated seats that require tagging. Waivers, deviations, and engineering change proposals require formal government approval and must be submitted through the Electronic Contractor Data Submission system, with critical safety-related changes subject to additional scrutiny. The order is designated as a DO-rated priority for national defense use under the Defense Priorities and Allocations System and issued under Emergency Acquisition Flexibilities. All materials must be mercury-free, and no unapproved substitutions or transcription of certification data is allowed. The contractor must also ensure sub-tier suppliers comply with all traceability, certification,

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

PARTS KIT,SEDIMENT

Solicitation # N0010426QFB74

This contract pertains to the procurement of a parts kit for sediment control, designated as special emphasis Level I material due to its critical role in a shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The material, specifically a stud manufactured to Hellan Strainer Company Drawing 1471 under ASTM-A193 Grade B16, must comply with stringent quality, traceability, and certification requirements. All components require full traceability from raw material through fabrication to final delivery, with unique heat-lot markings permanently applied in accordance with MIL-STD-792 and verified against certified test reports for chemical composition and mechanical properties. Testing must include liquid penetrant or magnetic particle inspection per T9074-AS-GIB-010/271 and MIL-DTL-1222, with 100% inspection of all certification documentation, traceability markings, and nondestructive test results. The contractor must maintain an ISO-9001-compliant quality system with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO-17025, subject to government audit at source. All shipments require prior review and acceptance by Portsmouth Naval Shipyard through the Wide Area WorkFlow (WAWF) system using designated DODAACs N50286 for shipping and N39040 for inspection and acceptance, with electronic notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. Certification data must be submitted via WAWF no later than 20 days before delivery and cannot be overridden until formal acceptance is granted. No material may be shipped without this pre-shipment approval. The contract mandates full compliance with Buy American provisions, prohibits mercury use, requires defect-free lot acceptance with zero tolerance for nonconformities, and enforces strict configuration control through Engineering Change Proposals for any modifications affecting form, fit, function, or interface. All subcontractors must adhere to the same quality and traceability standards, and any deviations or waivers require formal approval from the Contracting Officer. The delivery timeline is capped at 365 days from the contract’s effective date, and the order is classified as a “DO” rated priority under the Defense Priorities and Allocations System for national defense use.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

VALVE ASSEMBLY,MANI

Solicitation # N0010427RNA02

This small business set-aside solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Mani Valve Assembly (NSN 3HD 4820-01-490-9868). The material is designated as Special Emphasis Level I/SUBSAFE, as it is intended for use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates rigorous quality controls, including a required Quality Assurance Manual and a quality system compliant with ISO-9001 or MIL-I-45208. The award will be made to a single offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Technical requirements specify that the assembly must adhere to NAVSEA drawing 6985455 and include quantitative chemical and mechanical analysis for the valve body and needle valve. Mandatory testing includes hydrostatic and non-destructive tests, with strict pressure and time tolerances. All deliverables must be reported via Wide Area Workflow (WAWF), and certification data must be submitted to Portsmouth Naval Shipyard for review prior to shipment. Inspection and acceptance will occur at the contractor's plant, conducted by the Level I/DSS SOC Certifying Activity. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific red marking requirements for Level 1 materials.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

48--VALVE,BALL 1.000NPS

Solicitation # N0010426RNE77

Solicitation N00104-26-R-NE77 is a small business set-aside request for proposal issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of 1.000 NPS Ball Valves. These components are designated as Critical Safety Items and Special Emphasis material (Level I Scope of Certification), as they are used in crucial shipboard systems where failure could lead to serious personnel injury, loss of life, or loss of the vessel. Due to this criticality, the contract mandates rigorous quality controls, including strict adherence to toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290 and comprehensive material certifications for the body, bonnet, stem, and ball. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability is a prerequisite for award, and the government may utilize the DoD Supplier Performance Risk System (SPRS) for evaluation. The contract requires extensive testing and inspection, including pressure tests, liquid penetrant inspection, ultrasonic inspection of starting materials, and radiography of the valve body. All items must be delivered FOB Destination, with invoicing and receiving reports processed through the Wide Area Workflow (WAWF) system. Quality assurance is performed at the source by a DCMA Quality Assurance Representative to ensure full compliance with ISO 9001 standards and specific military specifications.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 1 month

1VALVE,REGULATING,F

Solicitation # N0010426QFF10

This contract pertains to the procurement of a specialized valve, specifically an Automatic Shutoff Valve, designated as SPECIAL EMPHASIS material (Level I) due to its critical role in shipboard systems where failure could lead to catastrophic outcomes including loss of life or vessel. The material requirements are stringent, mandating strict adherence to specific alloy specifications such as ASTM-B150, QQ-N-281, and SAE AMS-5640, with detailed testing and certification protocols for chemical composition, mechanical properties, and intergranular corrosion resistance. Traceability is paramount: every component must bear a unique traceability marking that links directly to its certification data, and all raw materials must remain segregated and documented from procurement through final assembly to prevent commingling. The contractor must maintain a quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government oversight at the source, including mandatory audits and inspections by the Defense Contract Management Agency. All certifications and test reports must be provided in standardized formats and submitted electronically via the Wide Area WorkFlow (WAWF) system, with final acceptance authority vested in Portsmouth Naval Shipyard using DODAAC N50286. Documentation must be complete, unqualified, and physically or electronically signed—no disclaimers are permitted. Welding and brazing procedures require prior approval and adherence to S9074 series standards, with qualification data and filler metal certifications submitted for every production run. The order is classified as a DO-rated national defense priority under the Defense Priorities and Allocations System, and is issued under Emergency Acquisition Flexibilities. Delivery is capped at 365 days post-contract effective date, with certification data must be submitted 20 days prior to each scheduled delivery and approved prior to shipment. The contract enforces Buy American provisions, mandatory small business subcontracting requirements, and a one-year warranty on delivered items, while prohibitions against mercury and improper marking are strictly enforced. Any deviations or waivers require prior written approval from the Contracting Officer and must include full justification and impact analysis, with all changes to configuration managed through formal Engineering Change Proposals.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Solicitation # N0010426QFF28

This contract pertains to the procurement of a 2-inch socket weld in-line stop valve with backseat, manufactured in strict compliance with NAVSHIPS drawing 803-2177525, assembly C8A1AF, and is designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems where failure could result in loss of life, vessel damage, or system collapse. All materials, including forged ASTM-A105 or MIL-S-24093 for the body and bonnet, ASTM-A182 Grade F6A or SAE-AMS-QQ-S-763 Class 410 for the stem, and MIL-DTL-1222 for studs and nuts, must meet precise chemical and mechanical requirements, with mandatory certifications for each heat lot. Traceability is enforced from raw material through final assembly via permanent markings and unique traceability numbers, linked directly to chemical and mechanical test reports that must be 100% verified, electronically signed, and unqualified in assertion of compliance. Hydrogen embrittlement relief is required for coated fasteners exceeding specified hardness thresholds, and all internal threads must be cut, not cold-formed. First Article Testing is mandatory, requiring one pre-production unit to be inspected and tested per General Note 7 of Drawing 2177525, with welding procedures and qualification data submitted for approval prior to any production or repair welding performed under S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Certifications must adhere to CDRL requirements, including DI-MISC-80678 for test results, DI-MISC-80875 and DI-MISC-80876 for welding data, and DI-MISC-81020 for material certification, all subject to government inspection at source. The contract mandates ISO-9001 with ISO-10012 and ISO/IEC 17025 compliance, or MIL-I-45208 with MIL-STD-45662 as an alternate, and requires full quality system documentation available for audit. All deliveries are subject to zero-defect lot acceptance criteria using ANSI/ASQ Z1.4 Level II sampling, with material shipments restricted to 365 days after contract effective date. Final delivery is to be supported by electronic submission

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

REGULATOR,TEMPERATU

Solicitation # N0010423QFC03

This contract pertains to the procurement of a pressure transducer and associated components designated as Special Emphasis Material Level I, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must conform precisely to Allied Signal drawing 3337765, part number 3337765-1, with strict controls over material composition, welding, heat treatment, and non-destructive testing. The fitting and diaphragm must be fabricated from AMS 5659 alloy and undergo mandatory dye penetrant inspection, proof pressure testing, and electrical validation per specified drawing parameters, with all tests conducted in accordance with MIL-STD-2035 and T9074-AS-GIB-010/271. Traceability is mandatory throughout the supply chain, requiring unique markings on each component linked directly to chemical and mechanical test reports, with batch sampling every eight hours during production. All welds and brazing must comply with S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, requiring prior submission and Navy approval of welding procedures and qualification records, plus submission of consumed weld metal certificates. Strict controls govern material handling, segregation of traceable lots, and prohibitions against cold-formed internal threads or mercury-containing compounds. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025 or alternatively MIL-I-45208 and MIL-STD-45662, subject to government audits and source inspection by DCMA. All documentation, including test certifications, weld records, and material compliance reports, must be submitted electronically through the ECDS system and via WAWF to Portsmouth Naval Shipyard prior to shipment, with specified recipients and notification email for acceptance tracking. The contract mandates 100% inspection of certification data, traceability markings, and non-destructive test results, with zero-defect acceptance criteria for lot sampling. The order is rated for national defense priority under the Defense Priorities and Allocations System, and adherence to Buy American provisions and security restrictions is required. Waivers and deviations must be formally submitted through ECDS, classified as Critical, Major, or Minor, and approved by the Contracting Officer. Engineering Change Proposals are required for any configuration changes affecting form, fit, or

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Aerospace Surface Finishing and Marking

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 6 hours ago

DEADLINE

Aerospace NDT and Heat Treatment

Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

Precision Aerospace CNC Machining

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Aerospace Casting and Forging

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Deep Cycle Marine Storage Batteries

Alkalies and Chlorine Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Specialized Nylon Cord Supply

Broadwoven Fabric Mills

POSTED

about 6 hours ago

DEADLINE

Life Preserver Vest Fabrication and Assembly

All Other Miscellaneous Textile Product Mills

POSTED

about 6 hours ago

DEADLINE

Supply of Annealed, Cold-Drawn Flat Steel Bar (COMP 8630)

Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

Lead Acid Storage Battery Supplier (NSN 6140-01-457-6156)

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

HAZMAT Packaging and Shipping Services

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Deep Cycle Marine Battery Supplier

Alkalies and Chlorine Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS