This Solicitation opportunity from Department Of Defense was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PARTS KIT, SERVOCYLINDE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of a Parts Kit, Servocylinder, identified by NSN 1650-00-758-7993 and part number 23439, with a quantity of four units to be delivered FOB origin within 159 days from the contract date. The item is governed by strict packaging and preservation standards under MIL-STD-2073-1E, with kits required to be consolidated into a single box that prevents movement or damage, cushioned as necessary, and labeled with a detailed contents list specifying each component’s NSN, part number, and quantity. Marking and barcoding must conform to MIL-STD-129, with no special marking required. Palletization follows DLA Packaging Requirements for Procurement (RP001), and preservation parameters are defined by specific codes including QUP 001, preservation method ZZ, and pack code U. Inspection and acceptance occur at the destination, governed by destination inspection requirements under FAR 52.246-2. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and acceptance requires zero non-conformances unless otherwise stated. Government identification must be removed from all non-accepted supplies. The offering contractor must comply with cybersecurity and data safeguarding requirements including NIST SP 800-171 DOD Assessment Requirements under a deviation, safeguarding covered defense information, and prohibited use of covered telecommunications equipment. Safety Data Sheets must be submitted prior to award for any hazardous materials, with labeling complying with 29 CFR 1910.1200, and offerors must maintain active SAM registrations and disclose socioeconomic status, exclusion status, and defense telecommunications equipment. The contract is subject to the Defense Priorities and Allocations System and requires payment submission via Wide Area Workflow with invoices and receiving reports as permitted. The acquisition is part of the Department of Defense’s ASC Commodities Division, issued as a Request for Quotations under solicitation SPE4A6-26-T-02TL, with delivery directed to Hill Air Force Base, Utah.
General Info
Agency
NAICS
Place of Performance
7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
PARTS KIT, SERVOCYLINDER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MOOG INC 94697 P/N 23439
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017383564 0001 EA 4.000
NSN/MATERIAL:1650007587993
DELIVERY (IN DAYS):0159
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-02TL
SECTION B
PR: 7017383564 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE
I/A/W THE LATEST REVISION OF MILITARY
SPECIFICATION MIL-STD-2073-1 APPENDIX D,
FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF
COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW
NSN PACKAGING REQUIREMENTS, THEN MARKED
IAW MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX,
ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE
TO CONTENTS OF KIT.
CONTENTS MUST BE CUSHIONED AS NECESSARY TO
PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH
BOXED KIT MUST CONTAIN A CONTENTS LIST
CONSISTING OF COMPONENT PART NSNS, PART NUMBER
AND QUANTITY PER KIT. BOX SHALL BE MARKED AND
BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:12/20/2026 Original Required Delivery Date:12/20/2026
SPE4A6-26-T-02TL
SECTION B
PR: 7017383564 PRLI: 0001 CONT’D
SPE4A6-26-T-02TL NSN/Part Number: 1650-00-758-7993 Quantity: 4 EA Purchase Request: 7017383564QTY: 4 Delivery: 159 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS