Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PARTS KIT, VALVE, CUR

Active
SPE4A1-26-T-2490Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of a single unit of a Parts Kit, Valve, CUR, identified by NSN 2915-00-703-5177, under solicitation SPE4A1-26-T-2490, with a delivery requirement of 245 days from award. The technical and quality requirements governing this contract are tied to the DLA Master List of Technical and Quality Requirements, with compliance mandated for all specified R and I codes. The supplier must adhere to DLA packaging standards, ensure removal of government identification from non-accepted supplies, and apply physical identification markings directly on bare items. The item is classified as a Type I (Code V) with a strict 144-month non-extendable shelf life and is subject to mercury restrictions, prohibiting intentional addition or direct contact with mercury compounds except for specified functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and certain naval reagents, all of which must meet additional containment and safety standards. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be assigned verification levels or AQLs as defined. The technical data associated with this item is subject to ITAR or EAR export controls, requiring compliance with DFARS 252.225-7048 and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Cybersecurity compliance at CMMC Level 2 is required, and the contractor must manage configuration changes through formal engineering change proposals. The performance location is Tinker AFB, Oklahoma, with Angelina Dunlap of the Department of Defense’s Aviation Supply Chain as the primary point of contact.

General Info

Parts Kit Valve Cur NSN 2915-00-703-5177 requested one unit under DLA federal solicitation.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE DR 22 BLDG 506, TINKER AFB, OK, 73145-9031, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2490.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Angelina Dunlap
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARTS KIT,VALVE,CUR
PARTS KIT, VALVE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
SPE4A1-26-T-2490
SECTION B
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS033: Shelf-life requirement RS001 for a TYPE I (CODE V) item with a shelf life of 144 months (non-extendable) applies to this item.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2915-00-703-5177 Quantity: 1 EA Purchase Request: 7017522868QTY: 1 Delivery: 245 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
HEAD ASSY-T.C.The contract pertains to the procurement of six units of the HEAD ASSY-T.C. with NSN/Part Number 5999-01-267-3821 under Purchase Request 7017603161. The solicitation is issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE7M5-26-T-353P and was posted on July 26, 2026. Responses are due by August 6, 2026, and the solicitation is classified as a federal procurement with no set-aside designation applied. The place of performance and office address details are unspecified, though the contracting entity is based in the United States. Information regarding the point of contact is not provided in the documentation, and the NAICS code is not listed. Interested parties can access additional details through the official DIBBS portal via the provided UI link.
ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
DIBBS
CLAMP, HUB TIEThe contract specifies the procurement of three CLAMP, HUB TIE units with NSN 2840-00-137-3682 under solicitation SPE4A6-26-T-09RH, with a delivery requirement of five days after delivery order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions and the RFP issue date for large acquisitions, unless amended. The item must conform to specified configurations and engineering change controls per MIL-STD-973 and interim notice 3, with any deviations requiring formal Engineering Change Proposal approval. Packaging must follow DLA standards, and inspection at origin is mandatory. Mercury or mercury-containing compounds are strictly prohibited from contact with the hardware except for approved functional uses like batteries, fluorescent lamps, sensors, or weapons, where shock-proof design and secondary containment are required in accordance with NAVSEA 5100-003D. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise directed, and unspecified attributes are treated as major. Casting or forging may be involved in manufacturing, and contractors must request tooling or material assistance via DLA’s dedicated portal if needed. The item description exceeds standard EDI transaction limits, and full specifications must be retrieved through DIBBS. General Electric Co is an acceptable source, and the point of contact for inquiries is Christine Donald of the Department of Defense, with performance located in San Diego, California.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
CASE ASSEMBLYThis contract pertains to the procurement of 12 units of a case assembly identified by NSN 2915-00-877-0140 and part number 6659818, supplied by PTI Technologies Inc. The item is classified as a critical application and must comply with stringent DLA packaging and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Delivery is FOB origin with a 296-day lead time, scheduled for June 17, 2026, under a total small business set-aside, and inspection and acceptance occur at the destination in San Diego, California. The contract strictly enforces zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II, respectively, and any unspecified attributes treated as major. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional uses in batteries, lighting, sensors, weapon systems, or approved reagents, with portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The supplier must adhere to CMMC Level 2 Cybersecurity Self-Assessment requirements and comply with all technical and quality standards referenced via the DLA Master List of Technical and Quality Requirements. The unit of issue is each (EA), the purchase price is $12.00 per unit, total contract value is $144.00, and no quantity variance is permitted. A technical data package is not currently approved for this NSN, and proprietary data restrictions apply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
BAFFLE ASSEMBLY, TURThe contract pertains to the procurement of a baffle assembly, specifically an engine spray shield lower component, identified by NSN 2840-00-612-7720 with a quantity of 64 units. It is issued under solicitation SPE4A6-26-T-09TB as a total small business set-aside, targeting vendors classified under NAICS code 336412, with a response deadline of August 3, 2026, and a delivery requirement of 433 days after contract award. The item is governed by comprehensive technical and quality requirements referenced from the DLA Master List, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. Configuration change management is enforced through engineering change proposals and variance requests, while inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted supplies, and strict export control protocols apply due to the presence of technical data subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S. Access to this controlled data is restricted to DLA contractors with approved JCP certification, completed DOD export training, and DLA authorization. Performance is mandated at Robins Air Force Base, Georgia, and all communication must be directed to the primary point of contact, Christine Donald of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
DUCT,COMPRESSOR,AIR_TF33_2840008003983RV_444561The U.S. Air Force, through the 421st SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of the compressor duct assembly with part number 444561 and NSN 2840-00-800-3983RV, intended for use on TF33 engines. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contract award is anticipated based on this effort. The government seeks information from potential suppliers capable of producing the item from scratch, including component procurement, inspection, testing, preservation, packaging, shipping, and management of supply chain risks such as diminishing manufacturing sources and long-lead parts. The estimated requirement is 57 units, and potential sources may also bear nonrecurring engineering costs to qualify as an approved vendor. The procurement falls under NAICS code 336412 with a size standard of 1,500 employees and is open to all business sizes, with specific interest in small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone businesses, and women-owned small businesses. The response deadline is August 25, 2026, and interested parties must select the “Add Me to Interested Vendors” button to be considered. No funds are available for this market research phase, and responses are strictly for acquisition planning purposes. The point of contact for submissions is the 421st SCMS Workflow Email, and performance will occur at Tinker AFB, Oklahoma. The government may opt to break the requirement into separate awards by airframe but has not yet determined the final acquisition strategy.
Ok DLA Aviation At Oklahoma City

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
DIBBS
COTS Fluid Prep Parts Kit SupplyThe contract involves the supply of a pre-assembled commercial off-the-shelf fluid preparation parts kit, identified by part number KIT1097 and national stock number 4330016534316, specifically for use in aerospace or defense fluid system maintenance operations. The kit is intended for delivery to DLA San Joaquin, with the place of performance located in Tracy, California, at zip code 95304-5000. The solicitation is categorized as a subcontract under NAICS code 336412, which corresponds to aircraft and missile components and accessories manufacturing, indicating the technical nature and defense-oriented application of the product. The opportunity was posted on July 24, 2026, with a response deadline set for July 29, 2026, and is procured through the Maritime Supply Chain under the Department of Defense, reflecting its alignment with federal defense logistics requirements. No set-aside provisions are specified, and all responses must be submitted via the DIBBS platform through the provided UI link.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
Chip Detector Manufacturing and SupplyThe contract calls for the manufacture and delivery of 60 precision chip detectors, identified by NSN 2995-00-946-9859 and Part Number A7013W, specifically engineered for use in defense aerospace systems where mission-critical reliability is non-negotiable. Each unit must meet stringent zero-defect quality protocols and maintain complete lot and serial traceability from raw materials through final assembly and shipment, ensuring compliance with defense-grade documentation standards. The product is to be delivered FOB origin, meaning the supplier assumes all responsibility and risk until the item is loaded at the designated shipping point, with no additional transportation or handling obligations imposed post-shipment. This subcontract, classified under NAICS code 336412 for Aerospace Product and Parts Manufacturing, is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance is specified as Dulles, Virginia, with a tight response window closing on July 29, 2026, following a posting date of July 24, 2026. The acquisition is not subject to any set-aside designation, indicating open eligibility to all qualified contractors. Delivery must align with exacting defense specifications, requiring rigorous quality control processes, certified testing records, and adherence to federal supply chain integrity mandates to ensure operational readiness in high-stakes environments.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
Nonmetallic Hose Supply (Bulk)The contract seeks the procurement and delivery of 1-inch diameter nonmetallic hose in bulk lengths, strictly adhering to Department of Defense technical standards set by the Fluid Handling Division. The supplier must ensure the product meets all specified quality, performance, and material requirements without exception. Packaging and labeling must comply with federal and defense guidelines to support proper handling, tracking, and inventory management throughout the supply chain. Delivery is to be made FOB origin, meaning the buyer assumes responsibility for transportation and associated costs once the goods leave the supplier’s facility. The hose is intended for use in military applications and must be free of metallic components to ensure compatibility in sensitive environments. The solicitation is open as a subcontract under NAICS code 336412 with a response deadline of July 29, 2026, and was posted on July 24, 2026. The place of performance is designated as Barstow, California, with a ZIP code of 92311-0000, indicating the delivery point or operational area where the hose will be utilized. While the solicitation number and point of contact details are not provided in the data, the contract is accessible via the DIBBS platform for qualified contractors to review full technical specifications and submit bids. The lack of set-aside classification suggests this opportunity is open to all eligible vendors without preference given to small, minority, or other designated business categories.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of a nonmetallic hose with a unit of issue of one foot, identified by NSN 4720-01-210-2726 and part number 2794HX, supplied by OSHKOSH DEFENSE LLC and CLARK EQUIPMENT CO. The requirement calls for delivery of exactly one foot under CLIN 0001 with a delivery window of ten days FOB origin, no negative quantity variance allowed, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and strict DLA standards including MIL-STD-129 marking and labeling, with palletization aligned to RP001 DLA Packaging Requirements. All technical and quality specifications referenced via R or I numbers from the DLA Master List take precedence over any other standard. The hose must be shipped in bulk, with no parcel post permitted, via the fastest traceable means to the designated warehouse at MCLB Yermo Annex in Barstow, California, under shipment RDD 555 and project code TP 2. The original required delivery date is April 3, 2025, and the contract is issued under solicitation SPE7M4-26-T-257D with compliance governed by the DLA Master List revision effective on the solicitation issue date.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
CHIP DETECTORThe contract pertains to the procurement of a CHIP DETECTOR, identified by part number A7013W and NSN 2995-00-946-9859, with a quantity of 60 units to be delivered within 20 days of contract award. The item is classified as a critical application and must comply with stringent quality and inspection standards, including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed, including palletization requirements as outlined in DLA’s packaging directives. The delivery is FOB origin, with inspection and acceptance occurring at the point of origin, and no variance in quantity is permitted. The contractor, Eaton Aerospace Engineered Sensors/TEDECO, is subject to tailored higher-level quality requirements for both manufacturers and non-manufacturers, and must comply with cybersecurity requirements under CMMC Level 2 self-assessment. The item is destined for the German Armed Forces Command USA-CAN at Dulles, Virginia, with special instructions for marking, documentation, and delivery logistics. Additionally, the contract incorporates technical and quality requirements from the DLA Master List and specifies the use of authorized DoD units of issue. The solicitation was issued on July 24, 2026, with responses due by July 29, 2026, under solicitation number SPE7L1-26-T-830C, and is classified under NAICS code 336412 for defense aviation and aerospace component manufacturing.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
Federal
Supply of Detachable DCM Units (OEM or Authorized Distributor)The contract requires the supply of new, traceable Detachable DCM units with NSN 1560-01-HS1-9758 and part number 501-1803-179 specifically for MH-60T aircraft. All units must be sourced from the original equipment manufacturer or an authorized distributor to ensure compliance with quality and authenticity standards. Deliveries are to be made F.O.B. Destination to Elizabeth City, North Carolina, with full responsibility for transportation logistics and timely arrival resting with the supplier. The contract is classified as a subcontract under NAICS code 336412, indicating it falls within the aerospace product and parts manufacturing sector, and is managed by the Aviation Logistics Center under the Department of Homeland Security. The solicitation was posted on July 24, 2026, with a firm response deadline of August 7, 2026, at 6:00 p.m. Eastern Time. No set-aside type has been designated, meaning the opportunity is open to all qualified vendors without preference for small businesses or other categories. The place of performance is fixed in Elizabeth City, NC, and all equipment must meet stringent traceability requirements to ensure accountability throughout the supply chain. Bidders must be prepared to demonstrate full compliance with technical specifications, documentation, and delivery timelines to meet operational readiness requirements for the MH-60T fleet.
Aviation Logistics Center (ALC)(00038)

POSTED

3 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 334416
New
DIBBS
TRANSFORMER, POWERThe contract pertains to the procurement of four power transformers identified by NSN 5950-01-561-0678 under solicitation SPE4A1-26-T-2491, with a response deadline of August 3, 2026, and a delivery requirement of 239 days after award. The item is to be delivered to New Cumberland, Pennsylvania, under the jurisdiction of the Department of Defense’s Aviation Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless amended. The supplier must comply with DLA packaging standards and the requirement to remove government identification from non-accepted supplies. Cybersecurity maturity model certification level 2 self-assessment is mandated, and covered defense information provisions apply. Item unique identification is not required per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Physical identification and bare item marking are specified, and the NAICS code 334416 classifies this as an electrical equipment manufacturing acquisition. The primary point of contact is Vincent Williams, reachable via email and phone provided.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAININGThe contract pertains to the procurement of four retaining clips identified by NSN 5340-01-564-7493 under solicitation SPE4A1-26-T-2488, with a required delivery within 20 days of contract award and a final delivery date set for July 20, 2026. The item is to be delivered FOB origin and inspected and accepted at the destination, with zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable version determined by the solicitation or award date depending on acquisition size. The supplier must comply with stringent packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging (unless classified as hazardous, in which case FED-STD-313 applies), and DLA Packaging Requirements (RP001) for palletization. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, and the item is exempt from Unique Identification under DFARS 252.211-7003(c)(1)(i) as specified by the Service customer. The supplier, Sikorsky Corporation (CAGE 78286), is subject to an approved alternate sampling plan QAP 1201 based on Attribute Single Statistical Acceptance Sampling that must meet or exceed the standards of ASQ H1331 or MIL-STD-1916. The contractor must also comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and implement configuration change management through Engineering Change Proposal procedures, as well as adhere to non-tailored quality requirements under ISO 9001:2015 for both manufacturers and non-manufacturers. Measuring and test equipment used must meet specified calibration standards. Delivery is directed to US Army APS 2, 2 SSA 405 AFSB in Powidz, Poland, under shipment RDD 777, and transportation logistics are governed by DLAD Procurement Notes C19 and C20. The contract mandates that all government identification be removed from non-accepted supplies and that physical identification of bare items follow specified marking protocols. The contracting officer is Alaska Jones, and the solicitation response deadline is August 3,
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGIDThis contract, identified as SPE4A1-26-T-2489, requires the procurement of nine connecting links, rigid, with NSN 3040-01-087-1606, to be delivered within 29 days of award. The solicitation mandates strict compliance with first article testing procedures, obligating the contractor to test one unit of the specified item and submit a formal test report within 120 calendar days of contract issuance. The contractor must provide written notice to the Contracting Officer and Quality Assurance Representative at least 14 days prior to shipment for final acceptance testing, with formal approval or disapproval to be issued within 30 days of receipt of the report. Production lot testing is required after first article approval, with one sample randomly selected from the production lot for government testing. The contractor must price the applicable CLIN to cover the cost of samples destroyed or rendered unusable during testing and must ship the selected samples to the Redstone Technical Test Center with specific labeling, documentation, and return logistics in place to ensure no cost is incurred by the government. Interior documentation must include signed inspection forms, test results, certifications, drawings, and shipping labels for return. All shipments must comply with MIL STD 129, and failure to comply with notification timelines or documentation requirements may result in rejection of the lot. The contract explicitly excludes fast pay terms, and the performance location is Albany, Georgia, with the contracting officer contact information provided for administrative coordination.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, CLOSE TOLERANCEThis contract specifies the procurement of close tolerance bolts identified by NSN 5306-01-508-6784, with a total quantity of 5,394 units distributed across three line items priced at $376, $934, and $4,084 per unit respectively. All items must conform to the current revision of the applicable part standard, which includes NAS6603 through NAS6620 Revision 11 dated December 31, 2025, and must adhere to the technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, particularly RQ001, RQ011, RQ017, and RP001. Identification markings must follow MIL-STD-130N for government compliance in addition to manufacturer-specific markings, and all packaging must comply with ASTM D3951 while prioritizing DLA’s master requirements and MIL-STD-129 for labeling. Palletization is governed by RP001, and gauging for Class 3A and 3B threads must meet System 22 of FED-STD-H28/20, excluding specific small thread sizes. Sampling and inspection require zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with critical attributes verified at VII level or AQL 0.1. The item is classified as a commercial item, and acceptance and inspection occur at the destination. All deliveries must meet a 169-day lead time, with a firm ship date of January 20, 2027, and a required delivery date of March 22, 2027. Deliveries are distributed across three DLA depots in Hill AFB, Utah; Corpus Christi, Texas; and New Cumberland, Pennsylvania. The contract is a total small business set-aside, solicited under SPE4A1-26-T-2487 with a response deadline of August 3, 2026, and is managed by the Department of Defense Aviation Supply Chain.
Nonferrous Forging

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
PROTECTOR, TURBINEThe contract pertains to the procurement of three units of a turbine protector identified by NSN 4920-00-571-9099 and manufacturer part number 21C1075P010 from Rhinestahl Corporation, with a delivery requirement of 297 days from the solicitation date and a mandatory delivery deadline of May 18, 2027. The item must be delivered FOB origin, with inspection and acceptance occurring at the destination facility located at the DLA Distribution Center in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking, labeling, and barcoding, and RP001 for palletization. Unit of issue is each, with no variance permitted in quantity. Item Unique Identification is not required per service customer request, and covered defense information and cybersecurity requirements are governed by DFARS clause 252.240-7997, which mandates a CMMC Level 2 self-assessment and compliance with NIST SP 800-171 security controls. Compliance with export controls, prohibition of hexavalent chromium, trafficking in persons, and hazardous materials handling is required, along with electronic invoicing and receiving reports via WAWF. The contract incorporates modified FAR and DFARS clauses covering changes, subcontracts, inspection, payment, safeguarding of information, and contractor representation, including mandatory SAM.gov registration and affirmative small business status reporting if applicable. All proposals must be submitted electronically through DIBBS by the response deadline of July 29, 2026, and no physical submissions are accepted. While the pricing and total contract value are not completed in the solicitation, payment terms are fixed price and subject to electronic submission protocols. Delivery must conform to ocean transportation rules requiring documentation of vessel flag status and compliance with U.S.-flag vessel preference for shipments exceeding the simplified acquisition threshold.
Machine Shops

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332321
New
DIBBS
CLEVIS, ROD ENDThe contract is for the procurement of five CLEVIS, ROD END items under NSN 5340013213779 and part number 4075584 from RTX CORPORATION, with a unit price of $5.00 per item and delivery required 256 days after receipt of order, with an original delivery date of October 14, 2026, and a need ship date of April 7, 2027. The contract is a fixed-price, simplified acquisition issued via DLA’s Automated Simplified Acquisitions system and incorporates the Defense Logistics Agency Master Solicitation Revision 105, which includes all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses. Inspection and acceptance occur at destination, with no variance allowed in quantity. All packaging and marking must comply strictly with MIL-STD-129 and DLA’s packaging requirements, and the material must be commercially packaged per ASTM D3951 unless designated hazardous under FED-STD-313, in which case TQ requirement IP025 applies; all DLA Master List of Technical and Quality Requirements supersede ASTM D3951. Sampling for quality verification follows MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless otherwise stated. The contractor must comply with all cybersecurity and information safeguarding clauses including DFARS 252.204-7012 and NIST SP 800-171 requirements, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and the requirement to submit Safety Data Sheets prior to award. Payment must be processed through WAWF using electronic invoices and receiving reports as required, and all deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The solicitation allows automated award and applies a HUBZone price evaluation preference, and offerors must provide accurate Representations and Certifications in SAM, including size status, compliance with whistleblower rights, trafficking in persons, and subcontracting policies. The point of contact for all contract administration matters is Allison Hugel of
Metal Window and Door Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance Support (CMMC Level 2)The contract provides cybersecurity compliance support for CMMC Level 2 certification, focusing on achieving NIST SP 800-171 compliance through system hardening and the development of a comprehensive System Security Plan. This effort is aimed at ensuring that information systems meet the required security controls to protect controlled unclassified information within the defense supply chain, with particular emphasis on operational readiness and adherence to federal cybersecurity standards. The work supports a subcontract under the Department of Defense's Aviation Supply Chain initiative, with performance required at Dyess Air Force Base, Texas. All deliverables must be completed by the response deadline of July 28, 2026, with the solicitation posted on July 23, 2026. The contract falls under NAICS code 541512 for computer systems design services and is structured to assist organizations in navigating the complexities of CMMC Level 2 requirements without external certification audits. The scope includes evaluating existing security postures, implementing technical and administrative controls, documenting policies and procedures, and ensuring all system configurations align with NIST guidance to pass a self-assessment. There is no set-aside classification specified, and the work is intended for vendors capable of delivering technical cybersecurity services to defense contractors in a high-security environment.
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract requires compliant packaging and labeling of metallic tubes in accordance with Defense Logistics Agency standards, with strict adherence to hazard communication protocols and IUID marking requirements. All work must ensure that hazardous materials are properly identified, labeled, and contained to meet federal safety and traceability regulations, with a focus on military-specific compliance for transportation, storage, and handling. The place of performance is designated as Dyess AFB with a zip code of 79607-1510, indicating the primary operational location where the packaging and labeling activities are to be completed. This is a subcontract under the NAICS code 561910, which pertains to support activities for transportation, and is managed by the Department of Defense through its Aviation Supply Chain organization. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, indicating a short window for interested parties to submit proposals. All submissions must fully address the technical and regulatory requirements specified, particularly regarding accurate hazard labeling and unique item identification marking to ensure seamless integration into DoD logistics systems. No set-aside type is specified, meaning this opportunity is open to all qualified subcontractors regardless of business size or status.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 541380
New
DIBBS
Materials Testing and Quality Verification ServicesThe contract seeks independent testing services for bent metallic tubes to verify material composition, pressure tolerance, and dimensional accuracy in accordance with Department of Defense Acceptable Quality Level standards. The work is scoped under NAICS code 541380 and is structured as a subcontract opportunity, with performance required at Dyess Air Force Base, Texas, and a strict response deadline of July 28, 2026. Testing protocols must align with rigorous military specifications to ensure compliance and reliability of components used in aviation supply chain applications. All submissions must meet the technical and procedural expectations defined by DoD quality verification protocols, and contractors are expected to deliver precise, documented results demonstrating adherence to accepted benchmarks.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 332999
New
DIBBS
Precision Bent Metallic Tube ManufacturingThe contract involves the precision manufacturing of bent metallic tubes to meet strict military specifications, with processes including CNC bending, heat treatment, and comprehensive inspection to ensure suitability for critical applications at Dyess Air Force Base. The work demands high-level technical expertise and adherence to defense-grade quality standards, targeting components integral to aviation and military systems. All manufacturing must be completed to exact dimensional and material requirements to guarantee performance under demanding operational conditions. The solicitation is classified as a subcontract under NAICS code 332999, with responses required by July 28, 2026, and was posted on July 23, 2026. Performance is specifically tied to Dyess AFB, with a zip code of 79607-1510, indicating the location where the finished tubes will be utilized. The contract is managed by the Aviation Supply Chain within the Department of Defense, emphasizing its importance to national defense logistics and equipment readiness. No set-aside provisions are specified, and the procurement is open to eligible subcontractors capable of fulfilling the technical and compliance demands.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 336412
New
DIBBS
BODY, NEEDLE VALVEThis contract specifies the procurement of a BODY, NEEDLE VALVE with NSN 2910-00-962-5824 and part number 26765-1, supplied by RTX CORPORATION, under solicitation SPE4A1-26-T-2484. A total of nine units are required to be delivered FOB origin within 169 days, with no tolerance for quantity variance. Delivery must be made to DLA Distribution Cherry Point in North Carolina, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific methods for preservation, wrapping, and intermediate container usage, and palletization must meet DLA packaging requirements. The item is designated as a critical application and must not contain or come into direct contact with mercury or mercury-containing compounds, except for allowable exceptions such as functional uses in batteries, instruments, or weapons systems specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment boundary. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampling unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance. Special marking is not required, and all documentation, including source approval requests and measurement equipment certification, must meet referenced standards. The contract includes transportation guidelines under DLAD Proc Notes C19 and C20, and the point of contact for inquiries is Antwan Jarrett, with the solicitation response deadline set for July 31, 2026, and the original required delivery date of January 12, 2028, though the contract specifies a ship date of January 17, 2027.
Aircraft Engine and Engine Parts Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract pertains to the procurement of 1,021 O-rings with NSN 5331-01-271-5779, supplied by MOOG INC based in East Aurora, NY, under solicitation SPE4A1-25-T-5659. Delivery is required within 157 days after order, and the solicitation closes on July 28, 2026, with technical and quality requirements incorporated via the DLA Master List of Technical and Quality Requirements identified by R or I numbers. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). The item contains no asbestos as defined in FED-STD-313 and must be physically marked with the manufacturer’s information. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified; critical, major, and minor attributes must be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The contract is managed by the Department of Defense’s Aviation Supply Chain, with performance occurring in New Cumberland, PA, and primary point of contact being Scott Brunner.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

4 days ago

DEADLINE

in 1 day
View Details