This Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PATCH, AIRCRAFT, MATE

Closed

SPE4A5-26-T-133GFederal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

NIIN: 016230912/NOMEN: RECEIVER TRANSMITTERThe Department of Defense, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source contract to Lockheed Martin for the repair of a specific Receiver Transmitter unit identified by part number 300A380-3 and NIIN 016230912. This procurement will be carried out under NAICS code 336413 and FSC code 1680. Since there are no drawings or data available and the government does not own data rights to this component, Lockheed Martin is anticipated to be the only capable source to perform the repair. The contract will be issued under an existing Basic Ordering Agreement, and other firms wishing to compete must submit a Source Approval Request, although approval will not delay the procurement process. The government plans to solicit and negotiate this repair using FAR Part 15 provisions rather than FAR Part 12, based on market research indicating the specialized nature of the repair. While this is a sole source action, the government invites any interested parties to submit capability statements or proposals within 35 days, which will be reviewed to determine if competition is feasible. Responses must be submitted electronically via NECO, and no phone or hard copy requests will be entertained. The point of contact for this solicitation is Kate N. Schalck, who can be reached via email for submission or inquiries. The response deadline is June 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--REGULATOR,OXYGEN,DIThis contract pertains to the procurement of 40 units of an oxygen regulator (NSN 7R-1660-015303496-FZ) with delivery terms FOB origin. It represents a follow-on request for proposal (RFP SPRPA1-26-C-YC01) after the cancellation of a previous solicitation, maintaining the same requirement under procurement request number N0038325X1607. Due to the specialized nature of the part, which is flight critical and requires engineering source approval by the design control activity, only previously government-approved sources with unique design capabilities, manufacturing knowledge, and retained technical data are eligible for consideration. The data and expertise needed to maintain quality are not commercially available, so new sources must undergo rigorous qualification procedures approved by the government engineering activity to be considered. The contract action is conducted under a non-competitive procurement strategy per FAR 6.302-1, though all responsible sources may submit expressions of interest or proposals within 45 days for consideration. Prospective bidders not already approved as sources must provide extensive technical data in accordance with NAVSUP Weapon Systems Support source approval brochures to be considered. Timeliness of source approval is critical; if new source qualification cannot be completed before government requirements, awards may proceed with existing sources to meet fleet support needs. The government is not applying commercial item acquisition policies for this solicitation, emphasizing the technical and critical nature of the item. The contracting office overseeing this action is located at DLA Aviation in Philadelphia, PA, with a designated point of contact for inquiries. Access to relevant military specifications and standardized documents is facilitated through government repositories, ensuring compliance and proper evaluation of technical qualifications.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

ACTUATOR,ELECTRO-METhe contract pertains to the solicitation for the procurement of an electro-mechanical actuator, identified by solicitation number SPRPA126QVB83, posted on May 13, 2026, with a response deadline of June 12, 2026. This procurement is managed by the Department of Defense through the Defense Logistics Agency (DLA) Aviation Office in Philadelphia, PA. The contract falls under the NAICS code 336413, which covers aerospace product and parts manufacturing. Key points include adherence to mandatory federal regulations such as item unique identification and valuation requirements, higher-level contract quality standards, and compliance with Buy American and Free Trade Agreements regulations effective through 2024. The solicitation is issued under Emergency Acquisition Flexibilities to expedite the process, with priority rating designated for national defense and emergency preparedness use. The contract also mentions administrative and operational procedures such as the use of Wide Area Workflow for payment instructions, mandatory use of Workflow Pro for modification assistance, and compliance with equal opportunity requirements for veterans and workers with disabilities. Contact information is provided for the primary point of contact at DLA Philadelphia, and all invoicing and delivery instructions are in accordance with specified federal and military standards. Security prohibitions and certifications are also noted, reflecting the contract’s strict adherence to federal acquisition and regulatory policies. The procurement’s place of performance is not specified, but its management and oversight rest with the Philadelphia office of the DLA Aviation agency.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

15--WING ASSEMBLY,AIRCR- AND SIMILAR REPLACEMENT PARTSThis contract involves the procurement of 13 units of a flight-critical wing assembly (NSN 7R-1560-016002718-QE) designated for aircraft and similar replacement parts, with delivery terms specified as FOB origin. Due to the critical nature of the item and limitations in available technical data, government source approval is mandatory before an award can be made. Only previously approved sources have been solicited because the time required to approve new suppliers typically exceeds the government's procurement timeframe. Potential new sources must submit detailed technical and production experience information as outlined in NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered. Failure to provide or adequately document this information will result in disqualification from the solicitation. This procurement is conducted under a sole-source authority per FAR 6.302-1, with a 45-day window for submissions after posting to allow any potentially qualified suppliers to express interest. The item requires stringent quality assurance maintained by the design control activity, as only the approved sources possess the necessary design knowledge, manufacturing expertise, and proprietary technical data essential for quality assurance. Any alternate source must undergo rigorous qualification procedures approved by the government engineering activity. Additionally, the procurement is subject to applicable trade agreements including the Buy American Act and relevant Free Trade Agreements. The contracting office is NAVSUP Weapon Systems Support, located in Philadelphia, PA, and the point of contact for this acquisition is Christina M. Foley. The solicitation was posted on May 27, 2026, with a response deadline of July 13, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

15--FAIRING,HINGE ARMThe contract solicits bids for the procurement of a FAIRING, HINGE ARM under solicitation number SPE4A726T505G, issued by DLA Aviation, part of the Department of Defense. The procurement is a total small business set-aside, classified under NAICS code 336413, and combines two line items, each requiring one unit. The first unit must be delivered to DLA Distribution Warner Robins within 561 days after order, and the second within 180 days after order. All responsible sources may submit quotes electronically, which will be considered if received by the deadline of June 24, 2026. The point of contact for questions is available via email at DibbsBSM@dla.mil, with instructions to refer to block 5 of the solicitation document or the SAM.gov portal for further information. The contract specifies delivery to the Warner Robins distribution center, but does not detail a specific place of performance. The solicitation was posted on June 16, 2026, and the agency’s office is located in Richmond, Virginia.

DLA Aviation

POSTED

about 24 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract covers the procurement of 32 units of "PATCH, AIRCRAFT, MATE" under solicitation number SPE4A5-26-T-133G for the Department of Defense, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, PA. The contract specifies strict adherence to technical and quality requirements as outlined in various DLA master lists, including packaging in accordance with DLA Packaging Requirements for Procurement and marking requirements per MIL-STD-129. Hazardous materials are to be packaged following federal standards, while non-hazardous materials follow ASTM D3951 guidelines. The inspection and acceptance will occur at the destination point. Quality assurance follows tailored higher-level contract quality requirements, incorporating procedures like MIL-STD-1916 sampling plans with zero acceptance of non-conformances unless otherwise noted. Physical identification of items must be consistent with designated part numbers, specifically Boeing part number 74A959112-2049. Transport and freight shipping are directed to specific addresses at the New Cumberland facility, with clear instructions referencing applicable DLA transportation procurement notes. The contracting agency is the ASC Supplier OEM Division, and the designated point of contact is Steven Oliver.

General Info

Procurement of 32 aircraft patches, strict quality, packaging, delivery in 171 days to DLA New Cumberland.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-133G DLA Aviation May 13 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 12

Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

STEVEN OLIVER

contact@example.gov

+1 (555) 000-0000

Full Description

PATCH,AIRCRAFT,MATE
PATCH,AIRCRAFT,MATERIAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE BOEING COMPANY 76301 P/N 74A959112-2049
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016753226 0001 EA 32.000
SPE4A5-26-T-133G
SECTION B
PR: 7016753226 PRLI: 0001 CONT’D
NSN/MATERIAL:1560015708419
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/08/2026 Original Required Delivery Date:03/07/2028
SPE4A5-26-T-133G NSN/Part Number: 1560-01-570-8419 Quantity: 32 EA Purchase Request: 7016753226QTY: 32 Delivery: 171 days ADO