Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Penetration Testing and Security Validation

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # C2305
The Elsinore Valley Municipal Water District is seeking professional design, bidding support, and construction engineering services for the replacement of the existing Corydon well with a new municipal groundwater production well located at the same site on district property, utilizing existing transmission infrastructure to maintain continuous water production and meet rising demand. The project is funded in part by a Department of the Interior Bureau of Reclamation WaterSMART Grant and requires full compliance with federal and state grant regulations, including Buy America provisions, Good Faith Effort requirements for Disadvantaged Business Enterprises, monthly reporting, and adherence to the Uniform Administrative Requirements, Cost Principles, and Audit Requirements for Federal Awards under 2 CFR Part 200. The engagement is structured in two phases: Phase 1 covers civil site design, technical specifications, and line-bid items for well drilling and abandonment of the existing well, including full-time on-site construction management; Phase 2 includes architectural, structural, mechanical, electrical, and instrumentation design for equipping, testing, and commissioning the new well, along with continued engineering support during construction. Contractors must submit detailed proposals including hourly rates, task-based cost breakdowns, and demonstrate experience with similar projects, with award based primarily on demonstrated competence, technical approach, and qualifications rather than lowest cost alone. The selected consultant will be required to submit monthly itemized invoices through the Treasury’s ASAP payment system and will operate under a not-to-exceed dollar limit to be negotiated after selection. All work must comply with Riverside County and California State Water Resources Control Board requirements, and the consultant must adhere to federal conflict of interest rules, whistleblower protections, drug-free workplace mandates, and trafficking prohibitions under 2 CFR. Key personnel substitutions require written approval, and insurance coverage must meet specified limits including $2 million in commercial general liability and $1 million in umbrella and auto liability. Subcontracting obligations for DBE, MBE, and WBE firms are mandatory and must be documented, and all proposers must certify compliance with the Debarment and Suspension requirements, American Iron and Steel provisions, Executive Order N-6-22 regarding sanctions, and complete non-collusion declarations under penalty of perjury. Proposals must be submitted via the EVMWD PlanetBids portal by 10:00 a.m. local time on September 1, 2026, and include all required forms, resumes, representative project lists, references, and a conflict of interest disclaimer.
TKE Engineering, Inc.

POSTED

about 5 hours ago

DEADLINE

in 25 days
NAICS: 541690
New
International
City of Martenville Space Planning Study Expression of Interest
Solicitation # COM-EOI2026
The City of Martensville is inviting qualified firms to submit Expressions of Interest for a Facilities Needs Assessment and Space Planning Study, identified by solicitation number COM-EOI2026, with a submission deadline of August 21, 2026. The study aims to evaluate current and projected space needs across all municipal operational departments to identify inefficiencies, optimize facility use, and inform long-term capital planning efforts. The work will require detailed analysis of existing infrastructure, future growth projections, and operational requirements to produce actionable recommendations that align with the city’s strategic goals. All proposals must be submitted through the Saskatchewan Public Sector tendering platform, with the primary point of contact for inquiries being Matthew Gruza, reachable via email at mgruza@martensville.ca or phone at 306-931-2166. The project is scoped solely for work within the City of Martensville, Saskatchewan, and there is no set-aside designation for specific business categories. Interested firms are expected to demonstrate relevant experience in municipal facility planning, space optimization, and capital asset assessment, with proposals evaluated based on qualifications, methodology, and capacity to deliver a comprehensive, data-driven study within the required timeframe.
City of Martensville

POSTED

about 11 hours ago

DEADLINE

in 14 days
NAICS: 541690
New
SLED
STANDARDS OF COVER STUDY - City of Decatur Fire Department
Solicitation # PE-64458-NONST-2027-000000033
The City of Decatur is seeking qualified consulting firms to conduct a comprehensive Standards of Cover (SOC) Study for the Decatur Fire Rescue Department, aligned with CFAI/CPSE methodology and NFPA standards. The study will evaluate the department’s current deployment model, service delivery, operational effectiveness, and community risk through a detailed analysis that includes a Community Risk Assessment, GIS-based response modeling, unit hour utilization, staffing evaluation, and an assessment of apparatus and capital needs. An optional accreditation readiness evaluation may also be included. Firms must demonstrate proven experience in fire service deployment analysis, GIS modeling, and community risk assessment for municipal fire agencies, and are required to submit a proposal detailing their qualifications, proposed methodology, project timeline, team structure, references, and all associated fees. Proposals must be submitted no later than 2:00 p.m. on Tuesday, September 8, 2026, to the City Manager's Office at 509 North McDonough Street, Decatur, Georgia, addressed to Fire Chief Toni Washington. The full Request for Proposals will be posted on the City’s website on August 10, 2026, and submission of a proposal constitutes acceptance of all RFP conditions. The City retains the right to award the contract to the proposer whose submission and subsequent negotiations best serve the City’s interests, and all submissions become public records under the Georgia Open Records Act. Questions and further information should be directed to Fire Chief Toni Washington at (678) 553-6582 or toni.washington@decaturga.com.
City of Decatur

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541690
New
SLED
Preventive Maintenance Program ManagementThe City of Roswell, Georgia is seeking a subcontractor to develop and manage a comprehensive preventive maintenance program for water tanks, focusing on mechanical inspections, corrosion monitoring, and regulatory compliance reporting through the use of computerized maintenance management system tools. The scope of work requires consistent and systematic maintenance activities to ensure the integrity and functionality of water storage infrastructure, with detailed documentation and reporting to meet operational and safety standards. All tasks must be executed in alignment with industry best practices and local regulatory requirements, leveraging CMMS technology to track work orders, schedule inspections, and maintain an auditable record of maintenance history. The contract is being issued as a subcontract under NAICS code 541690, with a posted date of August 6, 2026 and a response deadline of September 10, 2026. The performance location is within the jurisdiction of the City of Roswell, though specific site details are not provided. Interested parties must submit proposals by the stated deadline to be considered, and the work is expected to contribute directly to the long-term reliability and safety of the city’s water storage systems. While no set-aside classification is designated, the subcontractor must demonstrate proven experience in water infrastructure maintenance and proficiency with CMMS platforms to fulfill the contract requirements effectively.
City of Roswell

POSTED

about 18 hours ago

DEADLINE

in about 1 month
NAICS: 541690
New
Federal
USMMA - Industrial Hygienist
Solicitation # MMAPR521226000048
The United States Merchant Marine Academy in Kings Point, New York, is seeking a small business contractor to provide independent environmental monitoring and sampling services during the deep cleaning of its indoor firearms training range, with a primary focus on managing lead contamination and ensuring regulatory compliance. The effort is governed by a total small business set-aside under NAICS code 541620, with a size standard of $19 million in average annual receipts; only certified small business concerns will be considered responsive, and offers from non-small businesses will be rejected. The contract is structured as a single, firm fixed-price award under FAR Part 12, awarded on a Lowest Price Technically Acceptable (LPTA) basis, meaning that technical acceptability is evaluated first on an acceptability/unacceptability scale before price becomes the deciding factor. Offerors must demonstrate technical capability by meeting all requirements in the Statement of Work, including developing a site-specific monitoring plan, conducting air and surface sampling, overseeing HEPA filtration and lead encapsulation, verifying brass recycling, and submitting daily logs, non-compliance notices, and a final report. All testing must be performed by laboratories accredited under New York State’s Environmental Laboratory Approval Program, and work must comply with OSHA, EPA, HUD, NYSDEC, and NYSDOL regulations as well as the Secretary of the Interior’s Standards for the Treatment of Historic Properties due to the Academy’s National Register status. The period of performance begins mid-August 2026, contingent upon the award of the remediation contractor, and is expected to last no more than 30 calendar days from the Notice to Proceed, with on-site work typically lasting 3–5 working days. The contract requires compliance with the Service Contract Act under Wage Determination WD# 2015-4157/31 and the Davis-Bacon Act for prevailing wages in Nassau County, New York. Past performance must be documented with one example of a similar project completed within the last three years, including client details, contract value, and period of performance; absence of CPARS data results in a neutral rating. All proposals must be submitted electronically by August 11, 2026, to NarineA@usmma.edu, and must include documentation of the contractor’s small business status, Unique Entity ID, and laboratory accreditation. Failure to meet clearance levels for lead contamination requires the contractor to perform re-cleaning and resampling at no additional cost to the government. There is no estimated contract value
6923G2 DOT Maritime Administration

POSTED

about 21 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

The contract engages a vendor to conduct an independent penetration test on the SNA platform to verify compliance with Department of National Defence security standards and industry best practices. The work is focused on identifying vulnerabilities and ensuring the platform meets rigorous defense-grade security requirements through structured, ethical hacking methods and validated reporting. This subcontract is part of a broader effort to maintain the integrity and resilience of critical government systems against evolving cyber threats. The solicitation was posted on May 6, 2026, with submissions due by June 2, 2026, and is classified under NAICS code 541690 for other scientific and technical consulting services. Performance is expected to occur in Ottawa, Ontario, under the oversight of the Government of Canada’s Department of National Defence. The engagement is targeted toward qualified security professionals with experience in government cybersecurity frameworks and requires demonstrated expertise in conducting comprehensive, authorized offensive security assessments.

General Info

Independent penetration testing of SNA platform for Department of National Defence security compliance.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Ottawa, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent penetration testing of the SNA platform to validate security compliance with DND standards and industry best practices.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 336411
New
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is seeking to acquire a General Purpose Uncrewed Aircraft System (GPUAS) designed to support light land forces in a wide range of operational missions including Intelligence, Surveillance, and Reconnaissance; force protection; targeting; strike; situational awareness; decision support; and training or concept development. The system must meet strict technical performance specifications including a maximum take-off weight of 5 kg, a minimum endurance of 30 minutes with an electro-optical/infrared payload, a service ceiling of at least 8,000 feet ASL, and a dash speed exceeding 55 km/h under standard atmospheric conditions. Bidders are required to supply a minimum of 80 fully integrated UAS kits along with spare parts, support equipment, and a comprehensive technical data package that includes operation and maintenance manuals, spectrum compliance documentation, and training materials. All deliveries must be completed by March 1, 2027, to the 7 CF Supply Depot in Edmonton, Alberta, under Delivered Duty Paid (DDP), Incoterms 2020 terms, with the contractor bearing all transportation, insurance, customs, and import duties. This procurement is governed by Canadian federal procurement policy and is restricted exclusively to Canadian Suppliers as defined in Annex A, with a strong emphasis on Canadian Value-Added (CVA). Bidders must complete the Canadian Content Attestation Form (Annex E) to detail the CAD value of Canadian content across all goods and services, which accounts for 25% of the evaluation score. The selection process uses a weighted scoring model that combines Technical Merit (50%), Price-per-unit (25%), and Canadian Value-Added (25%), with the highest combined score determining award. Mandatory requirements are pass/fail gates; failure to meet any results in non-compliance. Bidders must also certify compliance with the Defence Protections Act, the Controlled Goods Program, cybersecurity protocols requiring secure boot, authenticated software, no externally controlled kill switches, and no components sourced from adversary nations, particularly for flight controllers, radios, and ground control stations. Offers must be submitted via email to tanya.mckenzie@forces.gc.ca by August 25, 2026, in English or French, and must adhere to a three-section format covering technical, financial, and declaratory submissions, including required forms such as the Offeror Declaration and Canadian Content Attestation. Payment terms specify a 30-day window after invoice receipt, with late payments accruing
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 423690
New
International
E60HN-16ELEC – Stream 2 - Oscilloscope and multimeters (Atlantic)
Solicitation # W7702-2026-00644-A
This procurement by the Department of National Defence through Defence Research and Development Canada Atlantic seeks oscilloscopes and multimeters to support R&D activities within the Atlantic region, specifically targeting Supply Arrangement holders qualified under Stream 2 – Electronic Products. The solicitation, identified as W7702-2026-00644-A, is open exclusively to a pre-qualified list of twenty-five suppliers including Anixter Canada Inc., Graybar Canada, Nedco-Rexel, Lumen, Eddy Group, Technet, Seivad, TestEquity, NWS, Testforce, Navair, KGPCo, Newark Element 14, Electro Rent LLC, I.T.M. Instruments, Per Vices Corporation, Giga-Tron, RS Americas Canada, Novapex, Axsera, Keverest, Telepro, Unisource Technology, Alpha Controls, and Simex Defence. Deliveries must be made to the R1 Atlantic region with Halifax, Nova Scotia indicated as the place of performance. No security clearance is required from suppliers, and proposals may be submitted in either English or French. The Crown retains the right to negotiate with any qualified respondents, and while the contract type is identified as a Request for Proposal, no pricing details, line items, delivery schedules, FOB terms, or evaluation criteria have been published in the notice. All relevant documentation is governed by the attached RFB, and inquiries must be directed to Contracting Authority Courtney Smart at courtney.smart@forces.gc.ca. The solicitation is posted with a response deadline of August 13, 2026, though no contract value, payment terms, invoicing methods, or inspection protocols are specified in the available information.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details